From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 31/43] drm/i915: Throw out some useless variables
Date: Mon, 12 Oct 2015 09:09:06 -0700 [thread overview]
Message-ID: <561BDB22.10403@virtuousgeek.org> (raw)
In-Reply-To: <1442940601-17011-1-git-send-email-ville.syrjala@linux.intel.com>
On 09/22/2015 09:50 AM, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Drop some useless 'reg' variables when we only use them once.
>
> v2: A few more, including a few variable moves
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 3 +-
> drivers/gpu/drm/i915/intel_display.c | 75 +++++++++++-------------------------
> drivers/gpu/drm/i915/intel_dp.c | 10 ++---
> 3 files changed, 28 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 4b61a42..d181dab 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -674,9 +674,8 @@ static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
> static u32 g4x_get_vblank_counter(struct drm_device *dev, int pipe)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> - int reg = PIPE_FRMCOUNT_G4X(pipe);
>
> - return I915_READ(reg);
> + return I915_READ(PIPE_FRMCOUNT_G4X(pipe));
> }
>
> /* raw reads, only for fast reads of display block, no need for forcewake etc. */
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 6f538d5..dc24e22 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1110,12 +1110,10 @@ static const char *state_string(bool enabled)
> void assert_pll(struct drm_i915_private *dev_priv,
> enum pipe pipe, bool state)
> {
> - int reg;
> u32 val;
> bool cur_state;
>
> - reg = DPLL(pipe);
> - val = I915_READ(reg);
> + val = I915_READ(DPLL(pipe));
> cur_state = !!(val & DPLL_VCO_ENABLE);
> I915_STATE_WARN(cur_state != state,
> "PLL state assertion failure (expected %s, current %s)\n",
> @@ -1172,20 +1170,16 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
> static void assert_fdi_tx(struct drm_i915_private *dev_priv,
> enum pipe pipe, bool state)
> {
> - int reg;
> - u32 val;
> bool cur_state;
> enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
> pipe);
>
> if (HAS_DDI(dev_priv->dev)) {
> /* DDI does not have a specific FDI_TX register */
> - reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
> - val = I915_READ(reg);
> + u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
> cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
> } else {
> - reg = FDI_TX_CTL(pipe);
> - val = I915_READ(reg);
> + u32 val = I915_READ(FDI_TX_CTL(pipe));
> cur_state = !!(val & FDI_TX_ENABLE);
> }
> I915_STATE_WARN(cur_state != state,
> @@ -1198,12 +1192,10 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
> static void assert_fdi_rx(struct drm_i915_private *dev_priv,
> enum pipe pipe, bool state)
> {
> - int reg;
> u32 val;
> bool cur_state;
>
> - reg = FDI_RX_CTL(pipe);
> - val = I915_READ(reg);
> + val = I915_READ(FDI_RX_CTL(pipe));
> cur_state = !!(val & FDI_RX_ENABLE);
> I915_STATE_WARN(cur_state != state,
> "FDI RX state assertion failure (expected %s, current %s)\n",
> @@ -1215,7 +1207,6 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
> static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> - int reg;
> u32 val;
>
> /* ILK FDI PLL is always enabled */
> @@ -1226,20 +1217,17 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
> if (HAS_DDI(dev_priv->dev))
> return;
>
> - reg = FDI_TX_CTL(pipe);
> - val = I915_READ(reg);
> + val = I915_READ(FDI_TX_CTL(pipe));
> I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
> }
>
> void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
> enum pipe pipe, bool state)
> {
> - int reg;
> u32 val;
> bool cur_state;
>
> - reg = FDI_RX_CTL(pipe);
> - val = I915_READ(reg);
> + val = I915_READ(FDI_RX_CTL(pipe));
> cur_state = !!(val & FDI_RX_PLL_ENABLE);
> I915_STATE_WARN(cur_state != state,
> "FDI RX PLL assertion failure (expected %s, current %s)\n",
> @@ -1309,8 +1297,6 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
> void assert_pipe(struct drm_i915_private *dev_priv,
> enum pipe pipe, bool state)
> {
> - int reg;
> - u32 val;
> bool cur_state;
> enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
> pipe);
> @@ -1324,8 +1310,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
> POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
> cur_state = false;
> } else {
> - reg = PIPECONF(cpu_transcoder);
> - val = I915_READ(reg);
> + u32 val = I915_READ(PIPECONF(cpu_transcoder));
> cur_state = !!(val & PIPECONF_ENABLE);
> }
>
> @@ -1337,12 +1322,10 @@ void assert_pipe(struct drm_i915_private *dev_priv,
> static void assert_plane(struct drm_i915_private *dev_priv,
> enum plane plane, bool state)
> {
> - int reg;
> u32 val;
> bool cur_state;
>
> - reg = DSPCNTR(plane);
> - val = I915_READ(reg);
> + val = I915_READ(DSPCNTR(plane));
> cur_state = !!(val & DISPLAY_PLANE_ENABLE);
> I915_STATE_WARN(cur_state != state,
> "plane %c assertion failure (expected %s, current %s)\n",
> @@ -1356,14 +1339,11 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> struct drm_device *dev = dev_priv->dev;
> - int reg, i;
> - u32 val;
> - int cur_pipe;
> + int i;
>
> /* Primary planes are fixed to pipes on gen4+ */
> if (INTEL_INFO(dev)->gen >= 4) {
> - reg = DSPCNTR(pipe);
> - val = I915_READ(reg);
> + u32 val = I915_READ(DSPCNTR(pipe));
> I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
> "plane %c assertion failure, should be disabled but not\n",
> plane_name(pipe));
> @@ -1372,9 +1352,8 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
>
> /* Need to check both planes against the pipe */
> for_each_pipe(dev_priv, i) {
> - reg = DSPCNTR(i);
> - val = I915_READ(reg);
> - cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
> + u32 val = I915_READ(DSPCNTR(i));
> + enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
> DISPPLANE_SEL_PIPE_SHIFT;
> I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
> "plane %c assertion failure, should be off on pipe %c but is still active\n",
> @@ -1386,33 +1365,29 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> struct drm_device *dev = dev_priv->dev;
> - int reg, sprite;
> - u32 val;
> + int sprite;
>
> if (INTEL_INFO(dev)->gen >= 9) {
> for_each_sprite(dev_priv, pipe, sprite) {
> - val = I915_READ(PLANE_CTL(pipe, sprite));
> + u32 val = I915_READ(PLANE_CTL(pipe, sprite));
> I915_STATE_WARN(val & PLANE_CTL_ENABLE,
> "plane %d assertion failure, should be off on pipe %c but is still active\n",
> sprite, pipe_name(pipe));
> }
> } else if (IS_VALLEYVIEW(dev)) {
> for_each_sprite(dev_priv, pipe, sprite) {
> - reg = SPCNTR(pipe, sprite);
> - val = I915_READ(reg);
> + u32 val = I915_READ(SPCNTR(pipe, sprite));
> I915_STATE_WARN(val & SP_ENABLE,
> "sprite %c assertion failure, should be off on pipe %c but is still active\n",
> sprite_name(pipe, sprite), pipe_name(pipe));
> }
> } else if (INTEL_INFO(dev)->gen >= 7) {
> - reg = SPRCTL(pipe);
> - val = I915_READ(reg);
> + u32 val = I915_READ(SPRCTL(pipe));
> I915_STATE_WARN(val & SPRITE_ENABLE,
> "sprite %c assertion failure, should be off on pipe %c but is still active\n",
> plane_name(pipe), pipe_name(pipe));
> } else if (INTEL_INFO(dev)->gen >= 5) {
> - reg = DVSCNTR(pipe);
> - val = I915_READ(reg);
> + u32 val = I915_READ(DVSCNTR(pipe));
> I915_STATE_WARN(val & DVS_ENABLE,
> "sprite %c assertion failure, should be off on pipe %c but is still active\n",
> plane_name(pipe), pipe_name(pipe));
> @@ -1441,12 +1416,10 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
> static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> - int reg;
> u32 val;
> bool enabled;
>
> - reg = PCH_TRANSCONF(pipe);
> - val = I915_READ(reg);
> + val = I915_READ(PCH_TRANSCONF(pipe));
> enabled = !!(val & TRANS_ENABLE);
> I915_STATE_WARN(enabled,
> "transcoder assertion failed, should be off on pipe %c but is still active\n",
> @@ -1553,21 +1526,18 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
> static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> - int reg;
> u32 val;
>
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
>
> - reg = PCH_ADPA;
> - val = I915_READ(reg);
> + val = I915_READ(PCH_ADPA);
> I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
> "PCH VGA enabled on transcoder %c, should be disabled\n",
> pipe_name(pipe));
>
> - reg = PCH_LVDS;
> - val = I915_READ(reg);
> + val = I915_READ(PCH_LVDS);
> I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
> "PCH LVDS enabled on transcoder %c, should be disabled\n",
> pipe_name(pipe));
> @@ -14864,13 +14834,12 @@ intel_check_plane_mapping(struct intel_crtc *crtc)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - u32 reg, val;
> + u32 val;
>
> if (INTEL_INFO(dev)->num_pipes == 1)
> return true;
>
> - reg = DSPCNTR(!crtc->plane);
> - val = I915_READ(reg);
> + val = I915_READ(DSPCNTR(!crtc->plane));
>
> if ((val & DISPLAY_PLANE_ENABLE) &&
> (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 7e64555..0b9f973 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -574,8 +574,6 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
> edp_notifier);
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct drm_i915_private *dev_priv = dev->dev_private;
> - u32 pp_div;
> - u32 pp_ctrl_reg, pp_div_reg;
>
> if (!is_edp(intel_dp) || code != SYS_RESTART)
> return 0;
> @@ -584,6 +582,8 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
>
> if (IS_VALLEYVIEW(dev)) {
> enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
> + u32 pp_ctrl_reg, pp_div_reg;
> + u32 pp_div;
>
> pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
> pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
> @@ -5526,7 +5526,6 @@ static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
> struct intel_dp *intel_dp = dev_priv->drrs.dp;
> struct intel_crtc_state *config = NULL;
> struct intel_crtc *intel_crtc = NULL;
> - u32 reg, val;
> enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
>
> if (refresh_rate <= 0) {
> @@ -5588,9 +5587,10 @@ static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
> DRM_ERROR("Unsupported refreshrate type\n");
> }
> } else if (INTEL_INFO(dev)->gen > 6) {
> - reg = PIPECONF(intel_crtc->config->cpu_transcoder);
> - val = I915_READ(reg);
> + u32 reg = PIPECONF(intel_crtc->config->cpu_transcoder);
> + u32 val;
>
> + val = I915_READ(reg);
> if (index > DRRS_HIGH_RR) {
> if (IS_VALLEYVIEW(dev))
> val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-10-12 16:08 UTC|newest]
Thread overview: 136+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 17:03 [PATCH 00/43] drm/i915: Type safe register read/write and a ton of prep work ville.syrjala
2015-09-18 17:03 ` [PATCH 01/43] drm/i915: Don't pass sdvo_reg to intel_sdvo_select_{ddc, i2c}_bus() ville.syrjala
2015-09-21 7:34 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 02/43] drm/i915: Parametrize LRC registers ville.syrjala
2015-09-21 7:36 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 03/43] drm/i915: Parametrize GEN7_GT_SCRATCH and GEN7_LRA_LIMITS ville.syrjala
2015-09-21 7:37 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 04/43] drm/i915: Parametrize fence registers ville.syrjala
2015-09-21 7:45 ` Jani Nikula
2015-09-21 12:33 ` Ville Syrjälä
2015-09-21 13:07 ` Ville Syrjälä
2015-09-21 15:05 ` [PATCH v2 " ville.syrjala
2015-09-25 12:02 ` Jani Nikula
2015-09-28 8:31 ` Daniel Vetter
2015-09-18 17:03 ` [PATCH 05/43] drm/i915: Parametrize FBC_TAG registers ville.syrjala
2015-09-21 7:46 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 06/43] drm/i915: Parametrize ILK turbo registers ville.syrjala
2015-09-21 7:47 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 07/43] drm/i915: Replace raw numbers with the approproate register name in ILK turbo code ville.syrjala
2015-09-21 7:48 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 08/43] drm/i915: Parametrize TV luma/chroma filter registers ville.syrjala
2015-09-21 7:50 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 09/43] drm/i915: Parametrize DDI_BUF_TRANS registers ville.syrjala
2015-09-21 7:59 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 10/43] drm/i915: Parametrize CSR_PROGRAM registers ville.syrjala
2015-09-23 14:15 ` Mika Kuoppala
2015-09-23 15:17 ` Daniel Vetter
2015-09-18 17:03 ` [PATCH 11/43] drm/i915: Parametrize UOS_RSA_SCRATCH ville.syrjala
2015-09-28 11:39 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 12/43] drm/i915: Add LO/HI PRIVATE_PAT registers ville.syrjala
2015-09-28 11:40 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 13/43] drm/i915: Always use GEN8_RING_PDP_{LDW, UDW} instead of hand rolling the register offsets ville.syrjala
2015-09-28 11:42 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 14/43] drm/i915: Include MCHBAR_MIRROR_BASE in ILK_GDSR ville.syrjala
2015-09-28 11:44 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 15/43] drm/i915: Parametrize PALETTE and LGC_PALETTE ville.syrjala
2015-09-28 11:45 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 16/43] drm/i915: s/_CURACNTR/CURCNTR(PIPE_A)/ ville.syrjala
2015-09-22 16:47 ` [PATCH v2 " ville.syrjala
2015-09-28 11:50 ` Jani Nikula
2015-09-28 13:35 ` Daniel Vetter
2015-09-28 11:49 ` [PATCH " Jani Nikula
2015-09-18 17:03 ` [PATCH 17/43] drm/i915: s/_FDI_RXA_.../FDI_RX_...(PIPE_A)/ ville.syrjala
2015-09-29 14:14 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 18/43] drm/i915: s/_TRANSA_CHICKEN/TRANS_CHICKEN(PIPE_A)/ ville.syrjala
2015-09-29 14:16 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 19/43] drm/i915: s/GET_CFG_CR1_REG/DPLL_CFGCR1/ etc ville.syrjala
2015-09-30 13:44 ` Jani Nikula
2015-09-30 13:53 ` Ville Syrjälä
2015-09-30 14:06 ` [PATCH v2 " ville.syrjala
2015-09-18 17:03 ` [PATCH 20/43] drm/i915: Use paramtrized WRPLL_CTL() ville.syrjala
2015-09-30 13:58 ` Jani Nikula
2015-09-30 14:00 ` Ville Syrjälä
2015-10-26 14:49 ` Ville Syrjälä
2015-09-18 17:03 ` [PATCH 21/43] drm/i915: Add VLV_HDMIB etc. which already include VLV_DISPLAY_BASE ville.syrjala
2015-09-28 11:53 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 22/43] drm/i915: s/DDI_BUF_CTL_A/DDI_BUF_CTL(PORT_A)/ ville.syrjala
2015-09-28 11:53 ` Jani Nikula
2015-09-28 13:38 ` Daniel Vetter
2015-09-18 17:03 ` [PATCH 23/43] drm/i915: Eliminate weird parameter inversion from BXT PPS registers ville.syrjala
2015-10-12 16:41 ` [PATCH v2 " ville.syrjala
2015-09-18 17:03 ` [PATCH 24/43] drm/i915: Parametrize HSW video DIP data registers ville.syrjala
2015-10-12 15:54 ` Jesse Barnes
2015-10-12 16:15 ` Ville Syrjälä
2015-09-18 17:03 ` [PATCH 25/43] drm/i915: Include gpio_mmio_base in GMBUS reg defines ville.syrjala
2015-10-12 15:56 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 26/43] drm/i915: Protect register macro arguments ville.syrjala
2015-10-12 16:03 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 27/43] drm/i915: Fix a few bad hex numbers in register defines ville.syrjala
2015-10-12 16:04 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 28/43] drm/i915: Turn GEN5_ASSERT_IIR_IS_ZERO() into a function ville.syrjala
2015-10-12 16:05 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 29/43] drm/i915: s/PIPE_FRMCOUNT_GM45/PIPE_FRMCOUNT_G4X/ etc ville.syrjala
2015-10-12 16:06 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 30/43] drm/i915: Parametrize and fix SWF registers ville.syrjala
2015-10-12 16:07 ` Jesse Barnes
2015-10-12 16:17 ` Ville Syrjälä
2015-09-18 17:03 ` [PATCH 31/43] drm/i915: Throw out some useless variables ville.syrjala
2015-09-22 16:50 ` [PATCH v2 " ville.syrjala
2015-10-12 16:09 ` Jesse Barnes [this message]
2015-09-18 17:03 ` [PATCH 32/43] drm/i915: Clean up LVDS register handling ville.syrjala
2015-10-12 16:09 ` Jesse Barnes
2015-11-01 15:33 ` Lukas Wunner
2015-11-04 16:59 ` Ville Syrjälä
2015-09-18 17:03 ` [PATCH 33/43] drm/i915: Remove dev_priv argument from NEEDS_FORCE_WAKE ville.syrjala
2015-10-12 16:12 ` Jesse Barnes
2015-10-13 11:21 ` Daniel Vetter
2015-09-18 17:03 ` [PATCH 34/43] drm/i915: Turn __raw_i915_read8() & co. in to inline functions ville.syrjala
2015-09-18 17:03 ` [PATCH 35/43] drm/i915: Move __raw_i915_read8() & co. into i915_drv.h ville.syrjala
2015-09-18 17:42 ` Chris Wilson
2015-09-18 18:23 ` Ville Syrjälä
2015-09-18 18:33 ` Chris Wilson
2015-09-18 18:37 ` Ville Syrjälä
2015-09-18 18:44 ` Chris Wilson
2015-09-18 19:26 ` Ville Syrjälä
2015-09-21 16:26 ` Jesse Barnes
2015-09-21 16:53 ` Ville Syrjälä
2015-09-21 16:57 ` Jesse Barnes
2015-09-18 17:03 ` [PATCH 36/43] drm/i915: Remove the magic AUX_CTL is at DP + foo tricks ville.syrjala
2015-09-18 17:03 ` [PATCH 37/43] drm/i915: Replace the aux ddc name switch statement with a table ville.syrjala
2015-09-18 17:03 ` [PATCH 38/43] drm/i915: Parametrize AUX registes ville.syrjala
2015-09-28 12:15 ` Jani Nikula
2015-09-28 13:28 ` Daniel Vetter
2015-09-28 13:34 ` Ville Syrjälä
2015-09-28 13:52 ` Daniel Vetter
2015-09-28 13:57 ` Jani Nikula
2015-09-28 15:09 ` [PATCH v2 38/43] drm/i915: Parametrize AUX registers ville.syrjala
2015-10-20 13:05 ` Jani Nikula
2015-10-20 13:37 ` Ville Syrjälä
2015-10-20 14:00 ` [PATCH v3 " ville.syrjala
2015-10-21 7:08 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 39/43] drm/i915: Add dev_priv->psr_mmio_base ville.syrjala
2015-10-20 13:08 ` Jani Nikula
2015-10-20 14:01 ` [PATCH v2 " ville.syrjala
2015-10-21 7:09 ` Jani Nikula
2015-09-18 17:03 ` [PATCH 40/43] drm/i915: Store aux data reg offsets in intel_dp->aux_ch_data_reg[] ville.syrjala
2015-09-28 12:28 ` Jani Nikula
2015-09-28 14:36 ` Ville Syrjälä
2015-09-28 15:10 ` [PATCH v2 " ville.syrjala
2015-10-20 14:02 ` [PATCH v3 " ville.syrjala
2015-09-18 17:03 ` [PATCH 41/43] drm/i915: Model PSR AUX register selection more like the normal AUX code ville.syrjala
2015-09-28 15:11 ` [PATCH v2 " ville.syrjala
2015-09-18 17:03 ` [PATCH 42/43] drm/i915: Prefix raw register defines with underscore ville.syrjala
2015-09-18 17:03 ` [RFC][PATCH 43/43] WIP: drm/i915: Type safe register read/write ville.syrjala
2015-09-18 17:33 ` Chris Wilson
2015-09-18 17:43 ` Ville Syrjälä
2015-09-18 18:12 ` Chris Wilson
2015-09-18 18:34 ` Ville Syrjälä
2015-09-23 15:23 ` Daniel Vetter
2015-09-24 15:38 ` Ville Syrjälä
2015-09-28 12:56 ` Jani Nikula
2015-09-28 13:03 ` Ville Syrjälä
2015-09-28 13:52 ` Daniel Vetter
2015-09-18 18:17 ` [PATCH 00/43] drm/i915: Type safe register read/write and a ton of prep work Chris Wilson
2015-09-22 17:41 ` Ville Syrjälä
2015-10-28 12:55 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561BDB22.10403@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox