From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/3] drm/i915: Do not acquire crtc state to check clock during modeset, v2.
Date: Tue, 27 Oct 2015 14:41:16 +0100 [thread overview]
Message-ID: <562F7EFC.80909@linux.intel.com> (raw)
In-Reply-To: <20151027132917.GC4437@intel.com>
Op 27-10-15 om 14:29 schreef Ville Syrjälä:
> On Tue, Oct 27, 2015 at 02:26:31PM +0100, Maarten Lankhorst wrote:
>> Parallel modesets are still not allowed, but this will allow updating
>> a different crtc during a modeset if the clock is not changed.
>>
>> Additionally when all pipes are DPMS off the cdclk will be lowered
>> to the minimum allowed.
>>
>> Changes since v1:
>> - Add dev_priv->active_crtcs for tracking which crtcs are active.
>> - Rename min_cdclk to min_pixclk and move to dev_priv.
>> - Add a active_crtcs mask which is updated atomically.
>> - Add intel_atomic_state->modeset which is set on modesets.
>> - Commit new pixclk/active_crtcs right after state swap.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 5 ++
>> drivers/gpu/drm/i915/intel_atomic.c | 2 +-
>> drivers/gpu/drm/i915/intel_display.c | 160 +++++++++++++++++++++++++----------
>> drivers/gpu/drm/i915/intel_drv.h | 7 +-
>> 4 files changed, 125 insertions(+), 49 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 59c94929f25b..37eef86e4a0a 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -1837,8 +1837,13 @@ struct drm_i915_private {
>> struct intel_pipe_crc pipe_crc[I915_MAX_PIPES];
>> #endif
>>
>> + /* dpll and cdclk state is protected by connection_mutex */
>> int num_shared_dpll;
>> struct intel_shared_dpll shared_dplls[I915_NUM_PLLS];
>> +
>> + unsigned int active_crtcs;
>> + unsigned int min_pixclk[I915_MAX_PIPES];
>> +
>> int dpio_phy_iosf_port[I915_NUM_PHYS_VLV];
>>
>> struct i915_workarounds workarounds;
>> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
>> index 25a891aa3824..cb8fcf4fe7f2 100644
>> --- a/drivers/gpu/drm/i915/intel_atomic.c
>> +++ b/drivers/gpu/drm/i915/intel_atomic.c
>> @@ -305,5 +305,5 @@ void intel_atomic_state_clear(struct drm_atomic_state *s)
>> {
>> struct intel_atomic_state *state = to_intel_atomic_state(s);
>> drm_atomic_state_default_clear(&state->base);
>> - state->dpll_set = false;
>> + state->dpll_set = state->modeset = false;
>> }
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 022e628b8520..a0508d5e9e13 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -5237,6 +5237,7 @@ static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
>>
>> static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
>> {
>> + struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>> struct drm_device *dev = state->dev;
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> unsigned long put_domains[I915_MAX_PIPES] = {};
>> @@ -5245,13 +5246,18 @@ static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
>> int i;
>>
>> for_each_crtc_in_state(state, crtc, crtc_state, i) {
>> - if (needs_modeset(crtc->state))
>> - put_domains[to_intel_crtc(crtc)->pipe] =
>> - modeset_get_crtc_power_domains(crtc);
>> + struct intel_crtc *intel_crtc =
>> + to_intel_crtc(crtc);
>> + enum pipe pipe = intel_crtc->pipe;
>> +
>> + if (!needs_modeset(crtc->state))
>> + continue;
>> +
>> + put_domains[pipe] = modeset_get_crtc_power_domains(crtc);
>> }
>>
>> if (dev_priv->display.modeset_commit_cdclk) {
>> - unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
>> + unsigned int cdclk = intel_state->cdclk;
>>
>> if (cdclk != dev_priv->cdclk_freq &&
>> !WARN_ON(!state->allow_modeset))
>> @@ -5938,23 +5944,32 @@ static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
>> static int intel_mode_max_pixclk(struct drm_device *dev,
>> struct drm_atomic_state *state)
>> {
>> - struct intel_crtc *intel_crtc;
>> - struct intel_crtc_state *crtc_state;
>> - int max_pixclk = 0;
>> + struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + struct drm_crtc *crtc;
>> + struct drm_crtc_state *crtc_state;
>> + unsigned max_pixel_rate = 0, i;
>> + enum pipe pipe;
>>
>> - for_each_intel_crtc(dev, intel_crtc) {
>> - crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> - if (IS_ERR(crtc_state))
>> - return PTR_ERR(crtc_state);
>> + memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
>> + sizeof(intel_state->min_pixclk));
>>
>> - if (!crtc_state->base.enable)
>> - continue;
>> + for_each_crtc_in_state(state, crtc, crtc_state, i) {
>> + int pixclk = 0;
>>
>> - max_pixclk = max(max_pixclk,
>> - crtc_state->base.adjusted_mode.crtc_clock);
>> + if (crtc_state->enable)
>> + pixclk = crtc_state->adjusted_mode.crtc_clock;
>> +
>> + intel_state->min_pixclk[i] = pixclk;
>> }
>>
>> - return max_pixclk;
>> + if (!intel_state->active_crtcs)
>> + return 0;
>> +
>> + for_each_pipe(dev_priv, pipe)
>> + max_pixel_rate = max(intel_state->min_pixclk[pipe], max_pixel_rate);
>> +
>> + return max_pixel_rate;
>> }
>>
>> static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
>> @@ -6255,6 +6270,9 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
>> for_each_power_domain(domain, domains)
>> intel_display_power_put(dev_priv, domain);
>> intel_crtc->enabled_power_domains = 0;
>> +
>> + dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
>> + dev_priv->min_pixclk[intel_crtc->pipe] = 0;
>> }
>>
>> /*
>> @@ -9490,29 +9508,39 @@ static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
>> /* compute the max rate for new configuration */
>> static int ilk_max_pixel_rate(struct drm_atomic_state *state)
>> {
>> - struct intel_crtc *intel_crtc;
>> - struct intel_crtc_state *crtc_state;
>> - int max_pixel_rate = 0;
>> + struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>> + struct drm_i915_private *dev_priv = state->dev->dev_private;
>> + struct drm_crtc *crtc;
>> + struct drm_crtc_state *crtc_state;
>> + unsigned max_pixel_rate = 0, i;
>> + enum pipe pipe;
>>
>> - for_each_intel_crtc(state->dev, intel_crtc) {
>> - int pixel_rate;
>> + memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
>> + sizeof(intel_state->min_pixclk));
>>
>> - crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> - if (IS_ERR(crtc_state))
>> - return PTR_ERR(crtc_state);
>> + for_each_crtc_in_state(state, crtc, crtc_state, i) {
>> + int pixclk = 0;
>>
>> - if (!crtc_state->base.enable)
>> - continue;
>> + if (crtc_state->enable) {
>> + struct intel_crtc_state *intel_crtc_state =
>> + to_intel_crtc_state(crtc_state);
>>
>> - pixel_rate = ilk_pipe_pixel_rate(crtc_state);
>> + pixclk = ilk_pipe_pixel_rate(intel_crtc_state);
> Could you avoid the reindent and renames please?
>
The pixclk has to be set even when enabled = false. This way the names for ilk_max_pixel_rate and intel_mode_max_pixclk are identical.
~Maarten
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-10-27 13:41 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-22 11:56 [PATCH 00/11] Kill off intel_crtc->atomic! Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 01/11] drm/i915: Use passed plane state for sprite planes Maarten Lankhorst
2015-10-22 12:58 ` Daniel Vetter
2015-10-22 13:09 ` Maarten Lankhorst
2015-10-26 9:30 ` [PATCH v2 01/11] drm/i915: Use passed plane state for sprite planes, v2 Maarten Lankhorst
2015-11-17 15:23 ` Daniel Vetter
2015-10-22 11:56 ` [PATCH 02/11] drm/i915: Do not acquire crtc state to check clock during modeset Maarten Lankhorst
2015-10-22 13:08 ` Daniel Vetter
2015-10-22 13:42 ` Maarten Lankhorst
2015-10-22 13:55 ` Daniel Vetter
2015-10-22 13:31 ` Ville Syrjälä
2015-10-27 13:26 ` [PATCH 1/3] drm/i915: Do not acquire crtc state to check clock during modeset, v2 Maarten Lankhorst
2015-10-27 13:26 ` [PATCH 2/3] drm/i915: Handle cdclk limits on broadwell Maarten Lankhorst
2015-10-27 13:26 ` [PATCH 3/3] drm/i915/bxt: Use the bypass frequency if there are no active pipes Maarten Lankhorst
2015-10-27 13:31 ` Ville Syrjälä
2015-10-27 13:29 ` [PATCH 1/3] drm/i915: Do not acquire crtc state to check clock during modeset, v2 Ville Syrjälä
2015-10-27 13:41 ` Maarten Lankhorst [this message]
2015-10-27 13:49 ` Ville Syrjälä
2015-10-27 13:51 ` Maarten Lankhorst
2015-10-27 14:27 ` Ville Syrjälä
2015-10-22 11:56 ` [PATCH 03/11] drm/i915: Kill off intel_crtc->atomic.wait_vblank Maarten Lankhorst
2015-10-22 13:09 ` Daniel Vetter
2015-10-22 13:30 ` Ville Syrjälä
2015-10-22 14:50 ` Maarten Lankhorst
2015-10-22 15:15 ` Ville Syrjälä
2015-10-26 8:31 ` Maarten Lankhorst
2015-11-17 15:25 ` Daniel Vetter
2015-10-22 11:56 ` [PATCH 04/11] drm/i915: Update watermark related members in the crtc_state Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 05/11] drm/i915: Remove intel_crtc->atomic.disable_ips Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 06/11] drm/i915: Remove atomic.pre_disable_primary Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 07/11] drm/i915: Remove some post-commit members from intel_crtc->atomic Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 08/11] drm/i915: Nuke fbc " Maarten Lankhorst
2015-10-22 11:56 ` [PATCH 09/11] drm/i915/skl: Prevent unclaimed register writes on skylake Maarten Lankhorst
2015-10-22 13:11 ` [Intel-gfx] " Daniel Vetter
2015-10-23 7:54 ` Jani Nikula
2015-11-02 8:01 ` Jani Nikula
2015-10-22 11:56 ` [PATCH 10/11] drm/i915/skl: Update watermarks before the crtc is disabled Maarten Lankhorst
2015-10-22 13:15 ` [Intel-gfx] " Daniel Vetter
2015-10-22 11:56 ` [PATCH 11/11] drm/i915/skl: Do not allow scaling when " Maarten Lankhorst
2015-10-22 13:17 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562F7EFC.80909@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox