* Re: Intel-gfx Digest, Vol 96, Issue 26
[not found] <mailman.26723.1451998732.3158.intel-gfx@lists.freedesktop.org>
@ 2016-01-12 13:39 ` Shubhangi Shrivastava
0 siblings, 0 replies; only message in thread
From: Shubhangi Shrivastava @ 2016-01-12 13:39 UTC (permalink / raw)
To: intel-gfx, Thulasimani, Sivakumar
Hi,
Can someone review the patches in the below mail?
PFB the link to the same:
https://patchwork.freedesktop.org/series/369/#rev5
Thanks and Regards,
Shubhangi Shrivastava.
On Tuesday 05 January 2016 06:28 PM,
intel-gfx-request@lists.freedesktop.org wrote:
> Send Intel-gfx mailing list submissions to
> intel-gfx@lists.freedesktop.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> or, via email, send a message with subject or body 'help' to
> intel-gfx-request@lists.freedesktop.org
>
> You can reach the person managing the list at
> intel-gfx-owner@lists.freedesktop.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Intel-gfx digest..."
>
>
> Today's Topics:
>
> 1. [PATCH 2/6] drm/i915: Cleaning up intel_dp_hpd_pulse
> (Shubhangi Shrivastava)
> 2. [PATCH 0/6] Fixing sink count related detection over
> (Shubhangi Shrivastava)
> 3. [PATCH 4/6] drm/i915: Save sink_count for tracking changes to
> it (Shubhangi Shrivastava)
> 4. [PATCH 3/6] drm/i915: Splitting intel_dp_check_link_status
> (Shubhangi Shrivastava)
> 5. [PATCH 5/6] drm/i915: read sink_count dpcd always
> (Shubhangi Shrivastava)
> 6. [PATCH 6/6] drm/i915: force full detect on sink count change
> (Shubhangi Shrivastava)
> 7. Re: [PATCH 0/2] DPCD Backlight Control (Adebisi, YetundeX)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 5 Jan 2016 18:20:22 +0530
> From: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
> To: intel-gfx@lists.freedesktop.org
> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
> Subject: [Intel-gfx] [PATCH 2/6] drm/i915: Cleaning up
> intel_dp_hpd_pulse
> Message-ID:
> <1451998226-21433-3-git-send-email-shubhangi.shrivastava@intel.com>
>
> Current DP detection has DPCD operations split across
> intel_dp_hpd_pulse and intel_dp_detect which contains
> duplicates as well. Also intel_dp_detect is called
> during modes enumeration as well which will result
> in multiple dpcd operations. So this patch tries
> to solve both these by bringing all DPCD operations
> in one single function and make intel_dp_detect
> use existing values instead of repeating same steps.
>
> v2: Pulled in a hunk from last patch of the series to
> this patch. (Ander)
> v3: Added MST hotplug handling. (Ander)
>
> Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
> Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 71 +++++++++++++++++++++++++----------------
> 1 file changed, 44 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index e3b4208..137757b 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4645,8 +4645,19 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> intel_dp_probe_oui(intel_dp);
>
> ret = intel_dp_probe_mst(intel_dp);
> - if (ret)
> + if (ret) {
> + goto out;
> + } else if (connector->status == connector_status_connected) {
> + /*
> + * If display was connected already and is still connected
> + * check links status, there has been known issues of
> + * link loss triggerring long pulse!!!!
> + */
> + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> + intel_dp_check_link_status(intel_dp);
> + drm_modeset_unlock(&dev->mode_config.connection_mutex);
> goto out;
> + }
>
> /*
> * Clearing NACK and defer counts to get their exact values
> @@ -4677,8 +4688,21 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> }
>
> out:
> - if (status != connector_status_connected)
> + if (status != connector_status_connected) {
> intel_dp_unset_edid(intel_dp);
> + /*
> + * If we were in MST mode, and device is not there,
> + * get out of MST mode
> + */
> + if (intel_dp->is_mst) {
> + DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
> + intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
> + intel_dp->is_mst = false;
> + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> + intel_dp->is_mst);
> + }
> + }
> +
> intel_display_power_put(to_i915(dev), power_domain);
> return;
> }
> @@ -4701,7 +4725,8 @@ intel_dp_detect(struct drm_connector *connector, bool force)
> return connector_status_disconnected;
> }
>
> - intel_dp_long_pulse(intel_dp->attached_connector);
> + if (force)
> + intel_dp_long_pulse(intel_dp->attached_connector);
>
> if (intel_connector->detect_edid)
> return connector_status_connected;
> @@ -5034,25 +5059,25 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> /* indicate that we need to restart link training */
> intel_dp->train_set_valid = false;
>
> - if (!intel_digital_port_connected(dev_priv, intel_dig_port))
> - goto mst_fail;
> -
> - if (!intel_dp_get_dpcd(intel_dp)) {
> - goto mst_fail;
> - }
> -
> - intel_dp_probe_oui(intel_dp);
> + intel_dp_long_pulse(intel_dp->attached_connector);
> + if (intel_dp->is_mst)
> + ret = IRQ_HANDLED;
> + goto put_power;
>
> - if (!intel_dp_probe_mst(intel_dp)) {
> - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> - intel_dp_check_link_status(intel_dp);
> - drm_modeset_unlock(&dev->mode_config.connection_mutex);
> - goto mst_fail;
> - }
> } else {
> if (intel_dp->is_mst) {
> - if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
> - goto mst_fail;
> + if (intel_dp_check_mst_status(intel_dp) == -EINVAL) {
> + /*
> + * If we were in MST mode, and device is not
> + * there, get out of MST mode
> + */
> + DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n",
> + intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
> + intel_dp->is_mst = false;
> + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> + intel_dp->is_mst);
> + goto put_power;
> + }
> }
>
> if (!intel_dp->is_mst) {
> @@ -5064,14 +5089,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
>
> ret = IRQ_HANDLED;
>
> - goto put_power;
> -mst_fail:
> - /* if we were in MST mode, and device is not there get out of MST mode */
> - if (intel_dp->is_mst) {
> - DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
> - intel_dp->is_mst = false;
> - drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
> - }
> put_power:
> intel_display_power_put(dev_priv, power_domain);
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] only message in thread