From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v2.1 5/6] drm/atomic: Handle encoder assignment conflicts in a separate check, v3.
Date: Wed, 2 Mar 2016 14:38:58 +0100 [thread overview]
Message-ID: <56D6ECF2.5080009@linux.intel.com> (raw)
In-Reply-To: <20160301175847.GN15993@intel.com>
The current check doesn't handle the case where we don't steal an
encoder, but keep it on the current connector. If we repurpose
disable_conflicting_encoders to do the checking, we just have
to reject the ones that conflict.
Changes since v1:
- Return early with empty encoder_mask, drm_for_each_connector
requires connection_mutex held.
Changes since v2:
- Add comments to the loops.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_setmode.invalid-clone-single-crtc-stealing
---
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index db11c2f9b098..bb60148c5c8d 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -86,7 +86,8 @@ drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
}
}
-static int disable_conflicting_connectors(struct drm_atomic_state *state)
+static int handle_conflicting_encoders(struct drm_atomic_state *state,
+ bool disable_conflicting_encoders)
{
struct drm_connector_state *conn_state;
struct drm_connector *connector;
@@ -94,6 +95,11 @@ static int disable_conflicting_connectors(struct drm_atomic_state *state)
unsigned encoder_mask = 0;
int i, ret;
+ /*
+ * First loop, find all newly assigned encoders from the connectors
+ * part of the state. If the same encoder is assigned to multiple
+ * connectors bail out.
+ */
for_each_connector_in_state(state, connector, conn_state, i) {
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
struct drm_encoder *new_encoder;
@@ -106,10 +112,33 @@ static int disable_conflicting_connectors(struct drm_atomic_state *state)
else
new_encoder = funcs->best_encoder(connector);
- if (new_encoder)
+ if (new_encoder) {
+ if (encoder_mask & (1 << drm_encoder_index(new_encoder))) {
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] on [CONNECTOR:%d:%s] already assigned\n",
+ new_encoder->base.id, new_encoder->name,
+ connector->base.id, connector->name);
+
+ return -EINVAL;
+ }
+
encoder_mask |= 1 << drm_encoder_index(new_encoder);
+ }
}
+ if (!encoder_mask)
+ return 0;
+
+ /*
+ * Second loop, iterate over all connectors not part of the state.
+ *
+ * If a conflicting encoder is found and disable_conflicting_encoders
+ * is not set, an error is returned. Userspace can provide a solution
+ * through the atomic ioctl.
+ *
+ * If the flag is set conflicting connectors are removed from the crtc
+ * and the crtc is disabled if no encoder is left. This preserves
+ * compatibility with the legacy set_config behavior.
+ */
drm_for_each_connector(connector, state->dev) {
struct drm_crtc_state *crtc_state;
@@ -120,6 +149,15 @@ static int disable_conflicting_connectors(struct drm_atomic_state *state)
if (!encoder || !(encoder_mask & (1 << drm_encoder_index(encoder))))
continue;
+ if (!disable_conflicting_encoders) {
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s] by [CONNECTOR:%d:%s]\n",
+ encoder->base.id, encoder->name,
+ connector->state->crtc->base.id,
+ connector->state->crtc->name,
+ connector->base.id, connector->name);
+ return -EINVAL;
+ }
+
conn_state = drm_atomic_get_connector_state(state, connector);
if (IS_ERR(conn_state))
return PTR_ERR(conn_state);
@@ -148,26 +186,6 @@ static int disable_conflicting_connectors(struct drm_atomic_state *state)
return 0;
}
-static bool
-check_pending_encoder_assignment(struct drm_atomic_state *state,
- struct drm_encoder *new_encoder)
-{
- struct drm_connector *connector;
- struct drm_connector_state *conn_state;
- int i;
-
- for_each_connector_in_state(state, connector, conn_state, i) {
- if (conn_state->best_encoder != new_encoder)
- continue;
-
- /* encoder already assigned and we're trying to re-steal it! */
- if (connector->state->best_encoder != conn_state->best_encoder)
- return false;
- }
-
- return true;
-}
-
static void
set_best_encoder(struct drm_atomic_state *state,
struct drm_connector_state *conn_state,
@@ -325,13 +343,6 @@ update_connector_routing(struct drm_atomic_state *state,
return 0;
}
- if (!check_pending_encoder_assignment(state, new_encoder)) {
- DRM_DEBUG_ATOMIC("Encoder for [CONNECTOR:%d:%s] already assigned\n",
- connector->base.id,
- connector->name);
- return -EINVAL;
- }
-
ret = steal_encoder(state, new_encoder);
if (ret) {
DRM_DEBUG_ATOMIC("Encoder stealing failed for [CONNECTOR:%d:%s]\n",
@@ -510,11 +521,9 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
}
}
- if (state->legacy_set_config) {
- ret = disable_conflicting_connectors(state);
- if (ret)
- return ret;
- }
+ ret = handle_conflicting_encoders(state, state->legacy_set_config);
+ if (ret)
+ return ret;
for_each_connector_in_state(state, connector, connector_state, i) {
/*
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-03-02 13:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-24 8:37 [PATCH v2 0/6] drm/atomic: Fix encoder stealing, v2 Maarten Lankhorst
2016-02-24 8:37 ` [PATCH v2 1/6] drm/atomic: Clean up update_output_state Maarten Lankhorst
2016-03-01 15:16 ` Ville Syrjälä
2016-02-24 8:37 ` [PATCH v2 2/6] drm/atomic: Pass connector and state to update_connector_routing Maarten Lankhorst
2016-03-01 15:19 ` Ville Syrjälä
2016-03-04 16:18 ` [Intel-gfx] " Daniel Vetter
2016-02-24 8:37 ` [PATCH v2 3/6] drm/atomic: Always call steal_encoder Maarten Lankhorst
2016-03-01 13:52 ` [PATCH v2.1 3/6] drm/atomic: Always call steal_encoder, v2 Maarten Lankhorst
2016-03-04 16:20 ` Daniel Vetter
2016-02-24 8:37 ` [PATCH v2 4/6] drm/atomic: Handle encoder stealing from set_config better Maarten Lankhorst
2016-03-04 16:20 ` Daniel Vetter
2016-02-24 8:37 ` [PATCH v2 5/6] drm/atomic: Handle encoder assignment conflicts in a separate check Maarten Lankhorst
2016-02-25 9:34 ` [PATCH v2.1 5/6] drm/atomic: Handle encoder assignment conflicts in a separate check, v2 Maarten Lankhorst
2016-03-01 17:21 ` [PATCH v2 5/6] drm/atomic: Handle encoder assignment conflicts in a separate check Ville Syrjälä
2016-03-01 17:45 ` [Intel-gfx] " Maarten Lankhorst
2016-03-01 17:58 ` Ville Syrjälä
2016-03-02 13:38 ` Maarten Lankhorst [this message]
2016-02-24 8:37 ` [PATCH v2 6/6] drm/atomic: Clean up steal_encoder Maarten Lankhorst
2016-03-02 17:32 ` Ville Syrjälä
2016-03-02 17:36 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D6ECF2.5080009@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).