From: Arun Siluvery <arun.siluvery@linux.intel.com>
To: tim.gore@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v4] drm/i915: implement WaClearTdlStateAckDirtyBits
Date: Mon, 11 Apr 2016 11:02:56 +0100 [thread overview]
Message-ID: <570B7650.3010304@linux.intel.com> (raw)
In-Reply-To: <1458571049-854-1-git-send-email-tim.gore@intel.com>
On 21/03/2016 14:37, tim.gore@intel.com wrote:
> From: Tim Gore <tim.gore@intel.com>
>
> This is to fix a GPU hang seen with mid thread pre-emption
> and pooled EUs.
>
> v2. Use IS_BXT_REVID instead of IS_BROXTON and INTEL_REVID
>
> v3. And use correct type for register addresses
>
> Signed-off-by: Tim Gore <tim.gore@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++++++
> drivers/gpu/drm/i915/intel_lrc.c | 19 +++++++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 06fb589..c54190b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1783,6 +1783,18 @@ enum skl_disp_power_wells {
> #define GEN9_IZ_HASHING_MASK(slice) (0x3 << ((slice) * 2))
> #define GEN9_IZ_HASHING(slice, val) ((val) << ((slice) * 2))
>
> +/* WaClearTdlStateAckDirtyBits */
> +#define GEN8_STATE_ACK _MMIO(0x20F0)
> +#define GEN9_STATE_ACK_SLICE1 _MMIO(0x20F8)
> +#define GEN9_STATE_ACK_SLICE2 _MMIO(0x2100)
> +#define GEN9_STATE_ACK_TDL0 (1 << 12)
> +#define GEN9_STATE_ACK_TDL1 (1 << 13)
> +#define GEN9_STATE_ACK_TDL2 (1 << 14)
> +#define GEN9_STATE_ACK_TDL3 (1 << 15)
> +#define GEN9_SUBSLICE_TDL_ACK_BITS \
> + (GEN9_STATE_ACK_TDL3 | GEN9_STATE_ACK_TDL2 | \
> + GEN9_STATE_ACK_TDL1 | GEN9_STATE_ACK_TDL0)
> +
> #define GFX_MODE _MMIO(0x2520)
> #define GFX_MODE_GEN7 _MMIO(0x229c)
> #define RING_MODE_GEN7(ring) _MMIO((ring)->mmio_base+0x29c)
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 3a23b95..b6dcd4d 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1450,6 +1450,25 @@ static int gen9_init_perctx_bb(struct intel_engine_cs *engine,
> wa_ctx_emit(batch, index, MI_NOOP);
> }
>
> + /* WaClearTdlStateAckDirtyBits:bxt */
> + if (IS_BXT_REVID(dev, 0, BXT_REVID_B0)) {
> + wa_ctx_emit(batch, index, MI_LOAD_REGISTER_IMM(4));
> +
> + wa_ctx_emit_reg(batch, index, GEN8_STATE_ACK);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN9_STATE_ACK_SLICE1);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN9_STATE_ACK_SLICE2);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN7_ROW_CHICKEN2);
> + /* dummy write to CS, mask bits are 0 to ensure the register is not modified */
> + wa_ctx_emit(batch, index, 0x0);
> + wa_ctx_emit(batch, index, MI_NOOP);
> + }
> +
> /* WaDisableCtxRestoreArbitration:skl,bxt */
> if (IS_SKL_REVID(dev, 0, SKL_REVID_D0) ||
> IS_BXT_REVID(dev, 0, BXT_REVID_A1))
>
sorry for the delay, it looks good to me,
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
regards
Arun
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2016-04-11 10:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 14:37 [PATCH v4] drm/i915: implement WaClearTdlStateAckDirtyBits tim.gore
2016-03-22 7:32 ` ✗ Fi.CI.BAT: warning for drm/i915: implement WaClearTdlStateAckDirtyBits (rev3) Patchwork
2016-04-11 11:17 ` Tvrtko Ursulin
2016-04-11 10:02 ` Arun Siluvery [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570B7650.3010304@linux.intel.com \
--to=arun.siluvery@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tim.gore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox