From: Dave Gordon <david.s.gordon@intel.com>
To: Peter Antoine <peter.antoine@intel.com>, intel-gfx@lists.freedesktop.org
Cc: rodrigo.vivi@intel.com
Subject: Re: [PATCH v3] drm/i915: resize the GuC WOPCM for rc6
Date: Thu, 5 May 2016 14:41:10 +0100 [thread overview]
Message-ID: <572B4D76.9040708@intel.com> (raw)
In-Reply-To: <1461661901-8448-1-git-send-email-peter.antoine@intel.com>
[-- Attachment #1: Type: text/plain, Size: 2279 bytes --]
On 26/04/2016 10:11, Peter Antoine wrote:
> This patch resizes the GuC WOPCM to so that the GuC and the RC6 memory
> spaces do not overlap.
>
> Issue: https://jira01.devtools.intel.com/browse/VIZ-6638
> Signed-off-by: Peter Antoine <peter.antoine@intel.com>
> ---
> drivers/gpu/drm/i915/i915_guc_reg.h | 5 +++--
> drivers/gpu/drm/i915/intel_guc_loader.c | 6 +++++-
> 2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
> index 80786d9..6e01238 100644
> --- a/drivers/gpu/drm/i915/i915_guc_reg.h
> +++ b/drivers/gpu/drm/i915/i915_guc_reg.h
> @@ -68,10 +68,11 @@
> #define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
>
> #define GUC_WOPCM_SIZE _MMIO(0xc050)
> -#define GUC_WOPCM_SIZE_VALUE (0x80 << 12) /* 512KB */
> +#define GUC_WOPCM_SIZE_VALUE (0x80 << 12) /* 512KB */
> +#define BXT_GUC_WOPCM_SIZE_VALUE (0x70 << 12) /* 448KB */
>
> /* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
> -#define GUC_WOPCM_TOP (GUC_WOPCM_SIZE_VALUE)
> +#define GUC_WOPCM_TOP (0x80 << 12) /* 512KB */
>
> #define GEN8_GT_PM_CONFIG _MMIO(0x138140)
> #define GEN9LP_GT_PM_CONFIG _MMIO(0x138140)
> diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
> index fc3ff68..38fb321 100644
> --- a/drivers/gpu/drm/i915/intel_guc_loader.c
> +++ b/drivers/gpu/drm/i915/intel_guc_loader.c
> @@ -312,7 +312,11 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
> intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
>
> /* init WOPCM */
> - I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
> + if (IS_BROXTON(dev))
> + I915_WRITE(GUC_WOPCM_SIZE, BXT_GUC_WOPCM_SIZE_VALUE);
> + else
> + I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
> +
> I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
>
> /* Enable MIA caching. GuC clock gating is disabled. */
So, this gives the right result, but doesn't really show or explain why
we have different values, or how the values are arrived at; they're just
more magic numbers. Also, in the loader there's a check on the firmware
size that uses different values. So I'd rather prefer the unified
approach in the attached version ...
.Dave.
[-- Attachment #2: 0001-drm-i915-bxt-reserve-space-for-RC6-in-the-the-GuC-WO.patch --]
[-- Type: text/plain, Size: 3073 bytes --]
>From fa0f5e514eea4342933e237e693ea547b9b10f81 Mon Sep 17 00:00:00 2001
From: Peter Antoine <peter.antoine@intel.com>
Date: Tue, 26 Apr 2016 10:11:41 +0100
Subject: [PATCH] drm/i915/bxt: reserve space for RC6 in the the GuC WOPCM
Organization: Intel Corporation (UK) Ltd. - Co. Reg. #1134945 - Pipers Way, Swindon SN3 1RJ
This patch resizes the GuC WOPCM (specifically on BXT)
so that the GuC and RC6 memory spaces do not overlap.
Issue: https://jira01.devtools.intel.com/browse/VIZ-6638
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
---
drivers/gpu/drm/i915/i915_guc_reg.h | 6 +++---
drivers/gpu/drm/i915/intel_guc_loader.c | 17 +++++++++++++----
2 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
index 80786d9..cf5a65b 100644
--- a/drivers/gpu/drm/i915/i915_guc_reg.h
+++ b/drivers/gpu/drm/i915/i915_guc_reg.h
@@ -67,11 +67,11 @@
#define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
+/* Defines WOPCM space available to GuC firmware */
#define GUC_WOPCM_SIZE _MMIO(0xc050)
-#define GUC_WOPCM_SIZE_VALUE (0x80 << 12) /* 512KB */
-
/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
-#define GUC_WOPCM_TOP (GUC_WOPCM_SIZE_VALUE)
+#define GUC_WOPCM_TOP (0x80 << 12) /* 512KB */
+#define BXT_GUC_WOPCM_RC6_RESERVED (0x10 << 12) /* 64KB */
#define GEN8_GT_PM_CONFIG _MMIO(0x138140)
#define GEN9LP_GT_PM_CONFIG _MMIO(0x138140)
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 876e5da..80fc1e0 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -281,6 +281,17 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
return ret;
}
+static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+{
+ u32 wopcm_size = GUC_WOPCM_TOP;
+
+ /* On BXT, the top of WOPCM is reserved for RC6 context */
+ if (IS_BROXTON(dev_priv))
+ wopcm_size -= BXT_GUC_WOPCM_RC6_RESERVED;
+
+ return wopcm_size;
+}
+
/*
* Load the GuC firmware blob into the MinuteIA.
*/
@@ -308,7 +319,7 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* init WOPCM */
- I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
+ I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
/* Enable MIA caching. GuC clock gating is disabled. */
@@ -552,9 +563,7 @@ static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
/* Header and uCode will be loaded to WOPCM. Size of the two. */
size = guc_fw->header_size + guc_fw->ucode_size;
-
- /* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
- if (size > GUC_WOPCM_SIZE_VALUE - 0x8000) {
+ if (size > guc_wopcm_size(dev->dev_private)) {
DRM_ERROR("Firmware is too large to fit in WOPCM\n");
goto fail;
}
--
1.9.1
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-05-05 13:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 9:11 [PATCH v3] drm/i915: resize the GuC WOPCM for rc6 Peter Antoine
2016-04-26 10:21 ` ✗ Fi.CI.BAT: failure for " Patchwork
2016-04-26 10:38 ` Peter Antoine
2016-04-26 14:20 ` Daniel Vetter
2016-05-12 16:29 ` Antoine, Peter
2016-05-05 13:41 ` Dave Gordon [this message]
2016-05-05 14:02 ` [PATCH v3] " Antoine, Peter
2016-05-05 15:04 ` Dave Gordon
2016-05-06 7:01 ` Peter Antoine
2016-05-06 9:36 ` Nick Hoath
2016-05-06 9:37 ` Nick Hoath
2016-05-06 12:18 ` Dave Gordon
2016-05-16 14:12 ` Nick Hoath
2016-05-10 15:59 ` Bob Paauwe
2016-05-10 18:46 ` Antoine, Peter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=572B4D76.9040708@intel.com \
--to=david.s.gordon@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=peter.antoine@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox