From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Dave Gordon <david.s.gordon@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: ✗ Ro.CI.BAT: failure for Accommodate multiple GuC submission clients
Date: Wed, 10 Aug 2016 10:42:27 +0100 [thread overview]
Message-ID: <57AAF703.80501@linux.intel.com> (raw)
In-Reply-To: <d273cb4c-67a7-1352-7ccd-049f83840fcf@intel.com>
On 09/08/16 16:48, Dave Gordon wrote:
> On 09/08/16 15:55, Patchwork wrote:
>> == Series Details ==
>>
>> Series: Accommodate multiple GuC submission clients
>> URL : https://patchwork.freedesktop.org/series/10847/
>> State : failure
>>
>> == Summary ==
>>
>> Series 10847v1 Accommodate multiple GuC submission clients
>> http://patchwork.freedesktop.org/api/1.0/series/10847/revisions/1/mbox
>>
>> Test drv_module_reload_basic:
>> pass -> DMESG-WARN (ro-skl3-i5-6260u)
>
> This machine is missing (the correct version of) the GuC firmware!
>
>> Test kms_flip:
>> Subgroup basic-flip-vs-wf_vblank:
>> pass -> FAIL (ro-byt-n2820)
>
> Bug 95236 - [BAT various] kms_flip fails with "inter-flip ts jitter: 0s,
> 183334usec" or similar time around 180msec
>
> .Dave.
>
>> fi-hsw-i7-4770k total:107 pass:91 dwarn:0 dfail:0 fail:0
>> skip:15
>> fi-kbl-qkkr total:107 pass:83 dwarn:0 dfail:0 fail:0
>> skip:23
>> fi-skl-i5-6260u total:107 pass:98 dwarn:0 dfail:0 fail:0 skip:8
>> fi-skl-i7-6700k total:107 pass:84 dwarn:0 dfail:0 fail:0
>> skip:22
>> fi-snb-i7-2600 total:107 pass:77 dwarn:0 dfail:0 fail:0
>> skip:29
>> ro-bdw-i5-5250u total:107 pass:97 dwarn:0 dfail:0 fail:0 skip:9
>> ro-bdw-i7-5600u total:107 pass:79 dwarn:0 dfail:0 fail:0
>> skip:27
>> ro-bsw-n3050 total:240 pass:194 dwarn:0 dfail:0 fail:4
>> skip:42
>> ro-byt-n2820 total:240 pass:196 dwarn:0 dfail:0 fail:4
>> skip:40
>> ro-hsw-i3-4010u total:107 pass:87 dwarn:0 dfail:0 fail:0
>> skip:19
>> ro-ilk1-i5-650 total:235 pass:173 dwarn:0 dfail:0 fail:2
>> skip:60
>> ro-ivb-i7-3770 total:107 pass:80 dwarn:0 dfail:0 fail:0
>> skip:26
>> ro-skl3-i5-6260u total:107 pass:97 dwarn:1 dfail:0 fail:0 skip:8
>> ro-bdw-i7-5557U failed to connect after reboot
>> ro-hsw-i7-4770r failed to connect after reboot
>> ro-ivb2-i7-3770 failed to connect after reboot
>>
>> Results at /archive/results/CI_IGT_test/RO_Patchwork_1785/
>>
>> e220d47 drm-intel-nightly: 2016y-08m-09d-09h-18m-12s UTC integration
>> manifest
>> f93075d NOMERGE: re-enable GuC loading and submission by default
>> 9fba995 drm/i915/guc: re-optimise i915_guc_client layout
>> 64c9f76 drm/i915/guc: use for_each_engine_id() where appropriate
>> 550dfa4 drm/i915/guc: add engine mask to GuC client & pass to GuC
>> fa78cb8 drm/i915/guc: refactor guc_init_doorbell_hw()
>> b194fc6 drm/i915/guc: doorbell reset should avoid used doorbells
Merged to dinq, thanks for the patches and review!
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-08-10 9:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-09 14:19 [PATCH v3 0/6] Accommodate multiple GuC submission clients Dave Gordon
2016-08-09 14:19 ` [PATCH v3 1/6] drm/i915/guc: doorbell reset should avoid used doorbells Dave Gordon
2016-08-09 14:19 ` [PATCH v3 2/6] drm/i915/guc: refactor guc_init_doorbell_hw() Dave Gordon
2016-08-09 14:19 ` [PATCH v3 3/6] drm/i915/guc: add engine mask to GuC client & pass to GuC Dave Gordon
2016-08-09 14:19 ` [PATCH v3 4/6] drm/i915/guc: use for_each_engine_id() where appropriate Dave Gordon
2016-08-09 14:19 ` [PATCH v3 5/6] drm/i915/guc: re-optimise i915_guc_client layout Dave Gordon
2016-08-09 14:19 ` [PATCH v3 6/6] NOMERGE: re-enable GuC loading and submission by default Dave Gordon
2016-08-09 14:55 ` ✗ Ro.CI.BAT: failure for Accommodate multiple GuC submission clients Patchwork
2016-08-09 15:48 ` Dave Gordon
2016-08-10 9:42 ` Tvrtko Ursulin [this message]
2016-08-10 7:19 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57AAF703.80501@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=david.s.gordon@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox