From: Jose Abreu <Jose.Abreu@synopsys.com>
To: Shashank Sharma <shashank.sharma@intel.com>,
dri-devel@lists.freedesktop.org, jim.bride@linux.intel.com
Cc: daniel.vetter@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v3 0/4]: Picture aspect ratio support in DRM layer
Date: Mon, 17 Oct 2016 12:31:05 +0100 [thread overview]
Message-ID: <5804B679.5010507@synopsys.com> (raw)
In-Reply-To: <1476703952-14561-1-git-send-email-shashank.sharma@intel.com>
Hi Shashank,
On 17-10-2016 12:32, Shashank Sharma wrote:
> This patch series adds 4 patches.
> - The first two patches add aspect ratio support in DRM layes
> - Next two patches add new aspect ratios defined in CEA-861-F
> supported for HDMI 2.0 4k modes.
>
> Adding aspect ratio support in DRM layer:
> - The CEA videmodes contain aspect ratio information, which we
> parse when we read the modes from EDID. But while transforming
> user_mode to kernel_mode or viceversa, DRM layer lose this
> information.
> - HDMI compliance testing for CEA modes, expects the AVI info frames
> to contain exact VIC no for the 'video mode under test'. Now CEA
> modes have different VIC for same modes but different aspect ratio
> for example:
> VIC 2 = 720x480@60 4:3
> VIC 3 = 720x480@60 16:9
> In this way, lack of aspect ratio information, can cause wrong VIC
> no in AVI IF, causing HDMI complaince test to fail.
> - This patch set adds code, which embeds the aspect ratio information
> also in DRM video mode flags, and uses it while comparing two modes.
>
> Adding new aspect ratios for HDMI 2.0
> - CEA-861-F defines two new aspect ratios, to be used for 4k HDMI 2.0
> modes.
> - 64:27
> - 256:135
> Last two patches in the series, adds code to handle these new
> aspect ratios.
>
> V2: Fixed review comments from Sean, Emil, Daniel
> V3: Fixed review comments from Jim Bride, got r-b for all patches
>
> Shashank Sharma (4):
> drm: add picture aspect ratio flags
> drm: Add aspect ratio parsing in DRM layer
> video: Add new aspect ratios for HDMI 2.0
> drm: Add and handle new aspect ratios in DRM layer
I am using the previous version of these patches, the
functionality remains the same so you can add my reviewed-by for
the whole series if you want. Are you still planning in sending
the patches for the new VIC's introduced in CEA-861-F?
>
> drivers/gpu/drm/drm_modes.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> drivers/video/hdmi.c | 4 ++++
> include/linux/hdmi.h | 2 ++
> include/uapi/drm/drm_mode.h | 24 +++++++++++++++++++-----
> 4 files changed, 68 insertions(+), 5 deletions(-)
>
Best regards,
Jose Miguel Abreu
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-10-17 11:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 11:32 [PATCH v3 0/4]: Picture aspect ratio support in DRM layer Shashank Sharma
2016-10-17 11:31 ` Jose Abreu [this message]
2016-10-17 11:34 ` Sharma, Shashank
2016-10-17 11:32 ` [PATCH v3 1/4] drm: add picture aspect ratio flags Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 2/4] drm: Add aspect ratio parsing in DRM layer Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 3/4] video: Add new aspect ratios for HDMI 2.0 Shashank Sharma
2016-10-17 11:32 ` [PATCH v3 4/4] drm: Add and handle new aspect ratios in DRM layer Shashank Sharma
2016-10-17 11:53 ` ✗ Fi.CI.BAT: warning for : Picture aspect ratio support in DRM layer (rev2) Patchwork
2016-10-17 11:59 ` Saarinen, Jani
-- strict thread matches above, loose matches on Subject: below --
2016-10-17 11:22 [PATCH v3 0/4] Picture aspect ratio support in DRM layer Shashank Sharma
2016-10-17 11:13 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5804B679.5010507@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jim.bride@linux.intel.com \
--cc=shashank.sharma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox