From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>,
David Airlie <airlied@linux.ie>,
intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: [REGRESSION] i915: No HDMI output with 4.4
Date: Mon, 08 Feb 2016 12:17:07 +0200 [thread overview]
Message-ID: <7a014cef15d5c99ef7ff33f11968d02c@natalenko.name> (raw)
Hi.
With Linux 4.4 external HDMI-attached monitor in not discovered by i915
driver. Here is boot log related to drm and i915 for Linux 4.4/4.4.1
kernel:
===
kernel: [drm] Initialized drm 1.1.0 20060810
kernel: [drm] Memory usable by graphics device = 2048M
kernel: [drm] Replacing VGA console driver
kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kernel: [drm] Driver supports precise vblank timestamp query.
kernel: [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor
0
kernel: i915 0000:00:02.0: No connectors reported connected with modes
kernel: [drm] Cannot find any crtc or sizes - going 1024x768
kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
===
i915 is unable to find any connectors. Reattaching HDMI cable does not
help. Note, we are talking about in-kernel i915 drm with no X involved
(launching X does not change anything, though).
Linux 4.3 worked OK. Here is boot log for 4.3 kernel:
===
kernel: [drm] Initialized drm 1.1.0 20060810
kernel: [drm] Memory usable by graphics device = 2048M
kernel: [drm] Replacing VGA console driver
kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kernel: [drm] Driver supports precise vblank timestamp query.
kernel: [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor
0
kernel: [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR*
uncleared pch fifo underrun on pch transcoder A
kernel: [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH
transcoder A FIFO underrun
kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
===
Hardware:
===
[~]$ lscpu | grep "Model name"
Model name: Intel(R) Pentium(R) CPU G2020 @ 2.90GHz
[~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller (rev 09)
===
and xrandr output (with 4.3 kernel):
===
[~]$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload
crtcs: 4 outputs: 4 associated providers: 0 name:Intel
[~]$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis
y axis) 510mm x 290mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1400x1050 59.95
1600x900 60.00
1280x1024 60.02
1440x900 59.90
1280x800 59.91
1152x864 59.97
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 60.00 59.94
640x480 60.00 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
===
Ideas?
next reply other threads:[~2016-02-08 10:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 10:17 Oleksandr Natalenko [this message]
2016-02-09 10:11 ` [REGRESSION] i915: No HDMI output with 4.4 Daniel Vetter
2016-02-09 15:56 ` Oleksandr Natalenko
2016-02-11 7:45 ` Oleksandr Natalenko
2016-02-11 8:21 ` Daniel Vetter
2016-02-11 8:54 ` Oleksandr Natalenko
2016-02-11 9:26 ` Ville Syrjälä
2016-02-11 11:16 ` Oleksandr Natalenko
2016-02-11 14:01 ` Ville Syrjälä
2016-02-12 7:52 ` Oleksandr Natalenko
2016-02-12 23:23 ` Ville Syrjälä
2016-02-15 7:57 ` Oleksandr Natalenko
2016-02-15 8:55 ` Oleksandr Natalenko
2016-02-15 14:42 ` Ville Syrjälä
2016-02-15 15:42 ` Daniel Vetter
2016-02-16 10:58 ` Oleksandr Natalenko
2016-02-16 12:54 ` Daniel Vetter
2016-02-16 13:21 ` Oleksandr Natalenko
2016-02-16 15:51 ` Oleksandr Natalenko
2016-02-22 12:32 ` Oleksandr Natalenko
2016-02-23 15:08 ` Ville Syrjälä
2016-02-24 4:40 ` Jindal, Sonika
2016-02-24 14:12 ` Oleksandr Natalenko
2016-02-24 6:07 ` Sharma, Shashank
2016-02-29 15:13 ` Daniel Vetter
2016-02-29 15:16 ` Sharma, Shashank
2016-02-29 15:41 ` Daniel Vetter
2016-02-29 15:41 ` Sharma, Shashank
2016-02-29 17:01 ` Daniel Vetter
2016-02-24 14:09 ` Oleksandr Natalenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a014cef15d5c99ef7ff33f11968d02c@natalenko.name \
--to=oleksandr@natalenko.name \
--cc=airlied@linux.ie \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).