Re: [PATCH][V2] drm/i915/dp: fix spelling mistakes: "seqeuncer" and "seqeuencer"

[Jani Nikula <jani.nikula@linux.intel.com>]

On Wed, 09 May 2018, Jani Nikula <jani.nikula@linux.intel.com> wrote:
> On Wed, 09 May 2018, Colin King <colin.king@canonical.com> wrote:
>> From: Colin Ian King <colin.king@canonical.com>
>>
>> Trivial fix to spelling mistakes in WARN warning message text and
>> in comments:
>>
>> "seqeuncer", "seqeuencer" -> "sequencer"
>>
>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
>
> (Waiting for the CI runs before merging.)

And pushed to dinq, thanks for the patch.

BR,
Jani.

>
>> ---
>>
>> V2: Also fix seqeuencer in comments
>>
>> ---
>>  drivers/gpu/drm/i915/intel_dp.c | 12 ++++++------
>>  1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index dde92e4af5d3..2cc58596ff5a 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -513,7 +513,7 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
>>  	uint32_t DP;
>>  
>>  	if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
>> -		 "skipping pipe %c power seqeuncer kick due to port %c being active\n",
>> +		 "skipping pipe %c power sequencer kick due to port %c being active\n",
>>  		 pipe_name(pipe), port_name(intel_dig_port->base.port)))
>>  		return;
>>  
>> @@ -554,7 +554,7 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
>>  	/*
>>  	 * Similar magic as in intel_dp_enable_port().
>>  	 * We _must_ do this port enable + disable trick
>> -	 * to make this power seqeuencer lock onto the port.
>> +	 * to make this power sequencer lock onto the port.
>>  	 * Otherwise even VDD force bit won't work.
>>  	 */
>>  	I915_WRITE(intel_dp->output_reg, DP);
>> @@ -3066,11 +3066,11 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
>>  	edp_panel_vdd_off_sync(intel_dp);
>>  
>>  	/*
>> -	 * VLV seems to get confused when multiple power seqeuencers
>> +	 * VLV seems to get confused when multiple power sequencers
>>  	 * have the same port selected (even if only one has power/vdd
>>  	 * enabled). The failure manifests as vlv_wait_port_ready() failing
>>  	 * CHV on the other hand doesn't seem to mind having the same port
>> -	 * selected in multiple power seqeuencers, but let's clear the
>> +	 * selected in multiple power sequencers, but let's clear the
>>  	 * port select always when logically disconnecting a power sequencer
>>  	 * from a port.
>>  	 */
>> @@ -5698,7 +5698,7 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
>>  
>>  	/*
>>  	 * On some VLV machines the BIOS can leave the VDD
>> -	 * enabled even on power seqeuencers which aren't
>> +	 * enabled even on power sequencers which aren't
>>  	 * hooked up to any port. This would mess up the
>>  	 * power domain tracking the first time we pick
>>  	 * one of these power sequencers for use since
>> @@ -5706,7 +5706,7 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
>>  	 * already on and therefore wouldn't grab the power
>>  	 * domain reference. Disable VDD first to avoid this.
>>  	 * This also avoids spuriously turning the VDD on as
>> -	 * soon as the new power seqeuencer gets initialized.
>> +	 * soon as the new power sequencer gets initialized.
>>  	 */
>>  	if (force_disable_vdd) {
>>  		u32 pp = ironlake_get_pp_control(intel_dp);

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx