public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@intel.com>
To: Manasi Navare <manasi.d.navare@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2] drm/i915/dp: do not proceed with autotests if we don't ACK them
Date: Tue, 24 Jan 2017 16:40:06 +0200	[thread overview]
Message-ID: <871svs7c8p.fsf@intel.com> (raw)
In-Reply-To: <20170123224911.GA16152@intel.com>

On Tue, 24 Jan 2017, Manasi Navare <manasi.d.navare@intel.com> wrote:
> Thanks for this patch. I have tested this on DPR 120 compliance test device
> and verified that it works as expected.
>
> Manasi
>
> On Fri, Jan 20, 2017 at 07:04:06PM +0200, Jani Nikula wrote:
>> There is no point in setting intel_dp->compliance.test_type, and
>> proceeding with the autotests, if we're about to NAK the request. Some
>> drive-by cleanups while at it.
>> 
>> v2: look at the ACK bit, as the result may also contain
>>     TEST_EDID_CHECKSUM_WRITE
>> 
>
>  Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
>  Tested-by: Manasi Navare <manasi.d.navare@intel.com>

Thanks for the review and testing, pushed to drm-intel-next-queued.

BR,
Jani.

>> Cc: Manasi Navare <manasi.d.navare@intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>>  drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++------------
>>  1 file changed, 9 insertions(+), 12 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index e80d620846c8..247fbf352576 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -3985,45 +3985,42 @@ static uint8_t intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
>>  static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>>  {
>>  	uint8_t response = DP_TEST_NAK;
>> -	uint8_t rxdata = 0;
>> -	int status = 0;
>> +	uint8_t request = 0;
>> +	int status;
>>  
>> -	status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_REQUEST, &rxdata, 1);
>> +	status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request);
>>  	if (status <= 0) {
>>  		DRM_DEBUG_KMS("Could not read test request from sink\n");
>>  		goto update_status;
>>  	}
>>  
>> -	switch (rxdata) {
>> +	switch (request) {
>>  	case DP_TEST_LINK_TRAINING:
>>  		DRM_DEBUG_KMS("LINK_TRAINING test requested\n");
>> -		intel_dp->compliance.test_type = DP_TEST_LINK_TRAINING;
>>  		response = intel_dp_autotest_link_training(intel_dp);
>>  		break;
>>  	case DP_TEST_LINK_VIDEO_PATTERN:
>>  		DRM_DEBUG_KMS("TEST_PATTERN test requested\n");
>> -		intel_dp->compliance.test_type = DP_TEST_LINK_VIDEO_PATTERN;
>>  		response = intel_dp_autotest_video_pattern(intel_dp);
>>  		break;
>>  	case DP_TEST_LINK_EDID_READ:
>>  		DRM_DEBUG_KMS("EDID test requested\n");
>> -		intel_dp->compliance.test_type = DP_TEST_LINK_EDID_READ;
>>  		response = intel_dp_autotest_edid(intel_dp);
>>  		break;
>>  	case DP_TEST_LINK_PHY_TEST_PATTERN:
>>  		DRM_DEBUG_KMS("PHY_PATTERN test requested\n");
>> -		intel_dp->compliance.test_type = DP_TEST_LINK_PHY_TEST_PATTERN;
>>  		response = intel_dp_autotest_phy_pattern(intel_dp);
>>  		break;
>>  	default:
>> -		DRM_DEBUG_KMS("Invalid test request '%02x'\n", rxdata);
>> +		DRM_DEBUG_KMS("Invalid test request '%02x'\n", request);
>>  		break;
>>  	}
>>  
>> +	if (response & DP_TEST_ACK)
>> +		intel_dp->compliance.test_type = request;
>> +
>>  update_status:
>> -	status = drm_dp_dpcd_write(&intel_dp->aux,
>> -				   DP_TEST_RESPONSE,
>> -				   &response, 1);
>> +	status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response);
>>  	if (status <= 0)
>>  		DRM_DEBUG_KMS("Could not write test response to sink\n");
>>  }
>> -- 
>> 2.1.4
>> 

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-01-24 14:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20 15:55 [PATCH] drm/i915/dp: do not proceed with autotests if we don't ACK them Jani Nikula
2017-01-20 16:54 ` ✓ Fi.CI.BAT: success for " Patchwork
2017-01-20 17:04 ` [PATCH v2] " Jani Nikula
2017-01-23 22:49   ` Manasi Navare
2017-01-24 14:40     ` Jani Nikula [this message]
2017-01-20 17:54 ` ✓ Fi.CI.BAT: success for drm/i915/dp: do not proceed with autotests if we don't ACK them (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871svs7c8p.fsf@intel.com \
    --to=jani.nikula@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=manasi.d.navare@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox