[PATCH 1/2] drm/i915/dsi: improve dphy param limits logging

[PATCH 1/2] drm/i915/dsi: improve dphy param limits logging

[Jani Nikula]

Move the limit checks near the calculations for each field, and actually
log the values that exceed limits.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 91c07b0c8db9..4d6ffa7b3e7b 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -647,6 +647,11 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	/* prepare count */
 	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
 
+	if (prepare_cnt > PREPARE_CNT_MAX) {
+		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
+		prepare_cnt = PREPARE_CNT_MAX;
+	}
+
 	/* exit zero count */
 	exit_zero_cnt = DIV_ROUND_UP(
 				(ths_prepare_hszero - ths_prepare_ns) * ui_den,
@@ -662,32 +667,29 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
 		exit_zero_cnt += 1;
 
+	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
+		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+	}
+
 	/* clk zero count */
 	clk_zero_cnt = DIV_ROUND_UP(
 				(tclk_prepare_clkzero -	ths_prepare_ns)
 				* ui_den, ui_num * mul);
 
+	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
+		clk_zero_cnt = CLK_ZERO_CNT_MAX;
+	}
+
 	/* trail count */
 	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
 	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
 
-	if (prepare_cnt > PREPARE_CNT_MAX ||
-		exit_zero_cnt > EXIT_ZERO_CNT_MAX ||
-		clk_zero_cnt > CLK_ZERO_CNT_MAX ||
-		trail_cnt > TRAIL_CNT_MAX)
-		DRM_DEBUG_DRIVER("Values crossing maximum limits, restricting to max values\n");
-
-	if (prepare_cnt > PREPARE_CNT_MAX)
-		prepare_cnt = PREPARE_CNT_MAX;
-
-	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX)
-		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
-
-	if (clk_zero_cnt > CLK_ZERO_CNT_MAX)
-		clk_zero_cnt = CLK_ZERO_CNT_MAX;
-
-	if (trail_cnt > TRAIL_CNT_MAX)
+	if (trail_cnt > TRAIL_CNT_MAX) {
+		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
 		trail_cnt = TRAIL_CNT_MAX;
+	}
 
 	/* B080 */
 	intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/2] drm/i915/dsi: fix dphy param field widths and range checks for chv+

[Jani Nikula]

Current CHV and BXT bspec says the dphy param register has four 8-bit
fields instead of the smaller VLV field widths. CHV bspec mentions the
register has changed since K0, but there's no indication of what exactly
changed. Lacking further details, change the field widths for all CHV
and later.

Define the max values based on the platform. Also define them based on
the register definitions instead of duplicating information.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106130
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      | 11 +++++++----
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 31 +++++++++++++++++++------------
 2 files changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fb106026a1f4..f4435a13b757 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9547,14 +9547,17 @@ enum skl_power_gate {
 #define _MIPIA_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb080)
 #define _MIPIC_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb880)
 #define MIPI_DPHY_PARAM(port)		_MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM)
-#define  EXIT_ZERO_COUNT_SHIFT				24
 #define  EXIT_ZERO_COUNT_MASK				(0x3f << 24)
-#define  TRAIL_COUNT_SHIFT				16
+#define  EXIT_ZERO_COUNT_MASK_CHV			(0xff << 24)
+#define  EXIT_ZERO_COUNT_SHIFT				24
 #define  TRAIL_COUNT_MASK				(0x1f << 16)
-#define  CLK_ZERO_COUNT_SHIFT				8
+#define  TRAIL_COUNT_MASK_CHV				(0xff << 16)
+#define  TRAIL_COUNT_SHIFT				16
 #define  CLK_ZERO_COUNT_MASK				(0xff << 8)
-#define  PREPARE_COUNT_SHIFT				0
+#define  CLK_ZERO_COUNT_SHIFT				8
 #define  PREPARE_COUNT_MASK				(0x3f << 0)
+#define  PREPARE_COUNT_MASK_CHV				(0xff << 0)
+#define  PREPARE_COUNT_SHIFT				0
 
 /* bits 31:0 */
 #define _MIPIA_DBI_BW_CTRL		(dev_priv->mipi_mmio_base + 0xb084)
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 4d6ffa7b3e7b..8d3dea693840 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -41,10 +41,17 @@
 #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
 #define MIPI_PORT_SHIFT			3
 
-#define PREPARE_CNT_MAX		0x3F
-#define EXIT_ZERO_CNT_MAX	0x3F
-#define CLK_ZERO_CNT_MAX	0xFF
-#define TRAIL_CNT_MAX		0x1F
+#define EXIT_ZERO_CNT_MAX(dev_priv) \
+	((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT)
+
+#define TRAIL_CNT_MAX(dev_priv) \
+	((IS_VALLEYVIEW(dev_priv) ? TRAIL_COUNT_MASK : TRAIL_COUNT_MASK_CHV) >> TRAIL_COUNT_SHIFT)
+
+#define CLK_ZERO_CNT_MAX(dev_priv) \
+	(CLK_ZERO_COUNT_MASK >> CLK_ZERO_COUNT_SHIFT)
+
+#define PREPARE_CNT_MAX(dev_priv)					\
+	((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT)
 
 #define NS_KHZ_RATIO 1000000
 
@@ -647,9 +654,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	/* prepare count */
 	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
 
-	if (prepare_cnt > PREPARE_CNT_MAX) {
+	if (prepare_cnt > PREPARE_CNT_MAX(dev_priv)) {
 		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
-		prepare_cnt = PREPARE_CNT_MAX;
+		prepare_cnt = PREPARE_CNT_MAX(dev_priv);
 	}
 
 	/* exit zero count */
@@ -667,9 +674,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
 		exit_zero_cnt += 1;
 
-	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX(dev_priv)) {
 		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
-		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+		exit_zero_cnt = EXIT_ZERO_CNT_MAX(dev_priv);
 	}
 
 	/* clk zero count */
@@ -677,18 +684,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 				(tclk_prepare_clkzero -	ths_prepare_ns)
 				* ui_den, ui_num * mul);
 
-	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+	if (clk_zero_cnt > CLK_ZERO_CNT_MAX(dev_priv)) {
 		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
-		clk_zero_cnt = CLK_ZERO_CNT_MAX;
+		clk_zero_cnt = CLK_ZERO_CNT_MAX(dev_priv);
 	}
 
 	/* trail count */
 	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
 	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
 
-	if (trail_cnt > TRAIL_CNT_MAX) {
+	if (trail_cnt > TRAIL_CNT_MAX(dev_priv)) {
 		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
-		trail_cnt = TRAIL_CNT_MAX;
+		trail_cnt = TRAIL_CNT_MAX(dev_priv);
 	}
 
 	/* B080 */
-- 
2.11.0

Re: [PATCH 2/2] drm/i915/dsi: fix dphy param field widths and range checks for chv+

[Ville Syrjälä]

On Thu, Apr 19, 2018 at 11:59:40AM +0300, Jani Nikula wrote:
> Current CHV and BXT bspec says the dphy param register has four 8-bit
> fields instead of the smaller VLV field widths. CHV bspec mentions the
> register has changed since K0, but there's no indication of what exactly
> changed. Lacking further details, change the field widths for all CHV
> and later.

K0 didn't happen, and looks like the linked HSD specifically says that
this change was meant for K0. So I suspect this patch is wrong.

The BXT HSD says planned for B0, but not sure if that actually happened
either.

On my VLV the reserved bits can't be set:
intel_reg write 0x180000:0xb080 0xffffffff
intel_reg write 0x180000:0xb880 0xffffffff
intel_reg read 0x180000:0xb080 0x180000:0xb880
 (0x00180000:0x0000b080): 0x3f1fff3f
 (0x00180000:0x0000b880): 0x3f1fff3f

So presumably the same rmw trick could be used to check what
how many bits we have on CHV/BXT.

Also looks like the CHV spec was forked from VLV before someone fixed
the prepare count to be 6 bits, which seems to be what my VLV actually
has as well. Not the first time the VLV docs are more up to date than
the CHV ones unfortunately.

> 
> Define the max values based on the platform. Also define them based on
> the register definitions instead of duplicating information.
> 
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106130
> Cc: stable@vger.kernel.org
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      | 11 +++++++----
>  drivers/gpu/drm/i915/intel_dsi_vbt.c | 31 +++++++++++++++++++------------
>  2 files changed, 26 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index fb106026a1f4..f4435a13b757 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9547,14 +9547,17 @@ enum skl_power_gate {
>  #define _MIPIA_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb080)
>  #define _MIPIC_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb880)
>  #define MIPI_DPHY_PARAM(port)		_MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM)
> -#define  EXIT_ZERO_COUNT_SHIFT				24
>  #define  EXIT_ZERO_COUNT_MASK				(0x3f << 24)
> -#define  TRAIL_COUNT_SHIFT				16
> +#define  EXIT_ZERO_COUNT_MASK_CHV			(0xff << 24)
> +#define  EXIT_ZERO_COUNT_SHIFT				24
>  #define  TRAIL_COUNT_MASK				(0x1f << 16)
> -#define  CLK_ZERO_COUNT_SHIFT				8
> +#define  TRAIL_COUNT_MASK_CHV				(0xff << 16)
> +#define  TRAIL_COUNT_SHIFT				16
>  #define  CLK_ZERO_COUNT_MASK				(0xff << 8)
> -#define  PREPARE_COUNT_SHIFT				0
> +#define  CLK_ZERO_COUNT_SHIFT				8
>  #define  PREPARE_COUNT_MASK				(0x3f << 0)
> +#define  PREPARE_COUNT_MASK_CHV				(0xff << 0)
> +#define  PREPARE_COUNT_SHIFT				0
>  
>  /* bits 31:0 */
>  #define _MIPIA_DBI_BW_CTRL		(dev_priv->mipi_mmio_base + 0xb084)
> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> index 4d6ffa7b3e7b..8d3dea693840 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> @@ -41,10 +41,17 @@
>  #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
>  #define MIPI_PORT_SHIFT			3
>  
> -#define PREPARE_CNT_MAX		0x3F
> -#define EXIT_ZERO_CNT_MAX	0x3F
> -#define CLK_ZERO_CNT_MAX	0xFF
> -#define TRAIL_CNT_MAX		0x1F
> +#define EXIT_ZERO_CNT_MAX(dev_priv) \
> +	((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT)
> +
> +#define TRAIL_CNT_MAX(dev_priv) \
> +	((IS_VALLEYVIEW(dev_priv) ? TRAIL_COUNT_MASK : TRAIL_COUNT_MASK_CHV) >> TRAIL_COUNT_SHIFT)
> +
> +#define CLK_ZERO_CNT_MAX(dev_priv) \
> +	(CLK_ZERO_COUNT_MASK >> CLK_ZERO_COUNT_SHIFT)
> +
> +#define PREPARE_CNT_MAX(dev_priv)					\
> +	((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT)
>  
>  #define NS_KHZ_RATIO 1000000
>  
> @@ -647,9 +654,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  	/* prepare count */
>  	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
>  
> -	if (prepare_cnt > PREPARE_CNT_MAX) {
> +	if (prepare_cnt > PREPARE_CNT_MAX(dev_priv)) {
>  		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
> -		prepare_cnt = PREPARE_CNT_MAX;
> +		prepare_cnt = PREPARE_CNT_MAX(dev_priv);
>  	}
>  
>  	/* exit zero count */
> @@ -667,9 +674,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
>  		exit_zero_cnt += 1;
>  
> -	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
> +	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX(dev_priv)) {
>  		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
> -		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
> +		exit_zero_cnt = EXIT_ZERO_CNT_MAX(dev_priv);
>  	}
>  
>  	/* clk zero count */
> @@ -677,18 +684,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  				(tclk_prepare_clkzero -	ths_prepare_ns)
>  				* ui_den, ui_num * mul);
>  
> -	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
> +	if (clk_zero_cnt > CLK_ZERO_CNT_MAX(dev_priv)) {
>  		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
> -		clk_zero_cnt = CLK_ZERO_CNT_MAX;
> +		clk_zero_cnt = CLK_ZERO_CNT_MAX(dev_priv);
>  	}
>  
>  	/* trail count */
>  	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
>  	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
>  
> -	if (trail_cnt > TRAIL_CNT_MAX) {
> +	if (trail_cnt > TRAIL_CNT_MAX(dev_priv)) {
>  		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
> -		trail_cnt = TRAIL_CNT_MAX;
> +		trail_cnt = TRAIL_CNT_MAX(dev_priv);
>  	}
>  
>  	/* B080 */
> -- 
> 2.11.0

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915/dsi: fix dphy param field widths and range checks for chv+

[Jani Nikula]

On Thu, 19 Apr 2018, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Thu, Apr 19, 2018 at 11:59:40AM +0300, Jani Nikula wrote:
>> Current CHV and BXT bspec says the dphy param register has four 8-bit
>> fields instead of the smaller VLV field widths. CHV bspec mentions the
>> register has changed since K0, but there's no indication of what exactly
>> changed. Lacking further details, change the field widths for all CHV
>> and later.
>
> K0 didn't happen, and looks like the linked HSD specifically says that
> this change was meant for K0. So I suspect this patch is wrong.

Oh well. The referenced bug indicated overflow in the logs, so I figured
this might be it.

I pushed patch 1 for now.

> The BXT HSD says planned for B0, but not sure if that actually happened
> either.
>
> On my VLV the reserved bits can't be set:
> intel_reg write 0x180000:0xb080 0xffffffff
> intel_reg write 0x180000:0xb880 0xffffffff
> intel_reg read 0x180000:0xb080 0x180000:0xb880
>  (0x00180000:0x0000b080): 0x3f1fff3f
>  (0x00180000:0x0000b880): 0x3f1fff3f
>
> So presumably the same rmw trick could be used to check what
> how many bits we have on CHV/BXT.

Asked on the bug, let's see if we get a response.

BR,
Jani.

>
> Also looks like the CHV spec was forked from VLV before someone fixed
> the prepare count to be 6 bits, which seems to be what my VLV actually
> has as well. Not the first time the VLV docs are more up to date than
> the CHV ones unfortunately.
>
>> 
>> Define the max values based on the platform. Also define them based on
>> the register definitions instead of duplicating information.
>> 
>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106130
>> Cc: stable@vger.kernel.org
>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>>  drivers/gpu/drm/i915/i915_reg.h      | 11 +++++++----
>>  drivers/gpu/drm/i915/intel_dsi_vbt.c | 31 +++++++++++++++++++------------
>>  2 files changed, 26 insertions(+), 16 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index fb106026a1f4..f4435a13b757 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -9547,14 +9547,17 @@ enum skl_power_gate {
>>  #define _MIPIA_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb080)
>>  #define _MIPIC_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb880)
>>  #define MIPI_DPHY_PARAM(port)		_MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM)
>> -#define  EXIT_ZERO_COUNT_SHIFT				24
>>  #define  EXIT_ZERO_COUNT_MASK				(0x3f << 24)
>> -#define  TRAIL_COUNT_SHIFT				16
>> +#define  EXIT_ZERO_COUNT_MASK_CHV			(0xff << 24)
>> +#define  EXIT_ZERO_COUNT_SHIFT				24
>>  #define  TRAIL_COUNT_MASK				(0x1f << 16)
>> -#define  CLK_ZERO_COUNT_SHIFT				8
>> +#define  TRAIL_COUNT_MASK_CHV				(0xff << 16)
>> +#define  TRAIL_COUNT_SHIFT				16
>>  #define  CLK_ZERO_COUNT_MASK				(0xff << 8)
>> -#define  PREPARE_COUNT_SHIFT				0
>> +#define  CLK_ZERO_COUNT_SHIFT				8
>>  #define  PREPARE_COUNT_MASK				(0x3f << 0)
>> +#define  PREPARE_COUNT_MASK_CHV				(0xff << 0)
>> +#define  PREPARE_COUNT_SHIFT				0
>>  
>>  /* bits 31:0 */
>>  #define _MIPIA_DBI_BW_CTRL		(dev_priv->mipi_mmio_base + 0xb084)
>> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> index 4d6ffa7b3e7b..8d3dea693840 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> @@ -41,10 +41,17 @@
>>  #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
>>  #define MIPI_PORT_SHIFT			3
>>  
>> -#define PREPARE_CNT_MAX		0x3F
>> -#define EXIT_ZERO_CNT_MAX	0x3F
>> -#define CLK_ZERO_CNT_MAX	0xFF
>> -#define TRAIL_CNT_MAX		0x1F
>> +#define EXIT_ZERO_CNT_MAX(dev_priv) \
>> +	((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT)
>> +
>> +#define TRAIL_CNT_MAX(dev_priv) \
>> +	((IS_VALLEYVIEW(dev_priv) ? TRAIL_COUNT_MASK : TRAIL_COUNT_MASK_CHV) >> TRAIL_COUNT_SHIFT)
>> +
>> +#define CLK_ZERO_CNT_MAX(dev_priv) \
>> +	(CLK_ZERO_COUNT_MASK >> CLK_ZERO_COUNT_SHIFT)
>> +
>> +#define PREPARE_CNT_MAX(dev_priv)					\
>> +	((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT)
>>  
>>  #define NS_KHZ_RATIO 1000000
>>  
>> @@ -647,9 +654,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>  	/* prepare count */
>>  	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
>>  
>> -	if (prepare_cnt > PREPARE_CNT_MAX) {
>> +	if (prepare_cnt > PREPARE_CNT_MAX(dev_priv)) {
>>  		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
>> -		prepare_cnt = PREPARE_CNT_MAX;
>> +		prepare_cnt = PREPARE_CNT_MAX(dev_priv);
>>  	}
>>  
>>  	/* exit zero count */
>> @@ -667,9 +674,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>  	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
>>  		exit_zero_cnt += 1;
>>  
>> -	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
>> +	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX(dev_priv)) {
>>  		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
>> -		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
>> +		exit_zero_cnt = EXIT_ZERO_CNT_MAX(dev_priv);
>>  	}
>>  
>>  	/* clk zero count */
>> @@ -677,18 +684,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>  				(tclk_prepare_clkzero -	ths_prepare_ns)
>>  				* ui_den, ui_num * mul);
>>  
>> -	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
>> +	if (clk_zero_cnt > CLK_ZERO_CNT_MAX(dev_priv)) {
>>  		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
>> -		clk_zero_cnt = CLK_ZERO_CNT_MAX;
>> +		clk_zero_cnt = CLK_ZERO_CNT_MAX(dev_priv);
>>  	}
>>  
>>  	/* trail count */
>>  	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
>>  	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
>>  
>> -	if (trail_cnt > TRAIL_CNT_MAX) {
>> +	if (trail_cnt > TRAIL_CNT_MAX(dev_priv)) {
>>  		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
>> -		trail_cnt = TRAIL_CNT_MAX;
>> +		trail_cnt = TRAIL_CNT_MAX(dev_priv);
>>  	}
>>  
>>  	/* B080 */
>> -- 
>> 2.11.0

-- 
Jani Nikula, Intel Open Source Technology Center

Re: [PATCH 2/2] drm/i915/dsi: fix dphy param field widths and range checks for chv+

[Jani Nikula]

On Thu, 19 Apr 2018, Jani Nikula <jani.nikula@intel.com> wrote:
> On Thu, 19 Apr 2018, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
>> On Thu, Apr 19, 2018 at 11:59:40AM +0300, Jani Nikula wrote:
>>> Current CHV and BXT bspec says the dphy param register has four 8-bit
>>> fields instead of the smaller VLV field widths. CHV bspec mentions the
>>> register has changed since K0, but there's no indication of what exactly
>>> changed. Lacking further details, change the field widths for all CHV
>>> and later.
>>
>> K0 didn't happen, and looks like the linked HSD specifically says that
>> this change was meant for K0. So I suspect this patch is wrong.
>
> Oh well. The referenced bug indicated overflow in the logs, so I figured
> this might be it.
>
> I pushed patch 1 for now.
>
>> The BXT HSD says planned for B0, but not sure if that actually happened
>> either.
>>
>> On my VLV the reserved bits can't be set:
>> intel_reg write 0x180000:0xb080 0xffffffff
>> intel_reg write 0x180000:0xb880 0xffffffff
>> intel_reg read 0x180000:0xb080 0x180000:0xb880
>>  (0x00180000:0x0000b080): 0x3f1fff3f
>>  (0x00180000:0x0000b880): 0x3f1fff3f
>>
>> So presumably the same rmw trick could be used to check what
>> how many bits we have on CHV/BXT.
>
> Asked on the bug, let's see if we get a response.

Confirms what you said:

(0x00180000:0x0000b080): 0x3f1fff3f
(0x00180000:0x0000b880): 0x3f1fff3f

BR,
Jani.

>
> BR,
> Jani.
>
>>
>> Also looks like the CHV spec was forked from VLV before someone fixed
>> the prepare count to be 6 bits, which seems to be what my VLV actually
>> has as well. Not the first time the VLV docs are more up to date than
>> the CHV ones unfortunately.
>>
>>> 
>>> Define the max values based on the platform. Also define them based on
>>> the register definitions instead of duplicating information.
>>> 
>>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106130
>>> Cc: stable@vger.kernel.org
>>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>>> ---
>>>  drivers/gpu/drm/i915/i915_reg.h      | 11 +++++++----
>>>  drivers/gpu/drm/i915/intel_dsi_vbt.c | 31 +++++++++++++++++++------------
>>>  2 files changed, 26 insertions(+), 16 deletions(-)
>>> 
>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>>> index fb106026a1f4..f4435a13b757 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -9547,14 +9547,17 @@ enum skl_power_gate {
>>>  #define _MIPIA_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb080)
>>>  #define _MIPIC_DPHY_PARAM		(dev_priv->mipi_mmio_base + 0xb880)
>>>  #define MIPI_DPHY_PARAM(port)		_MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM)
>>> -#define  EXIT_ZERO_COUNT_SHIFT				24
>>>  #define  EXIT_ZERO_COUNT_MASK				(0x3f << 24)
>>> -#define  TRAIL_COUNT_SHIFT				16
>>> +#define  EXIT_ZERO_COUNT_MASK_CHV			(0xff << 24)
>>> +#define  EXIT_ZERO_COUNT_SHIFT				24
>>>  #define  TRAIL_COUNT_MASK				(0x1f << 16)
>>> -#define  CLK_ZERO_COUNT_SHIFT				8
>>> +#define  TRAIL_COUNT_MASK_CHV				(0xff << 16)
>>> +#define  TRAIL_COUNT_SHIFT				16
>>>  #define  CLK_ZERO_COUNT_MASK				(0xff << 8)
>>> -#define  PREPARE_COUNT_SHIFT				0
>>> +#define  CLK_ZERO_COUNT_SHIFT				8
>>>  #define  PREPARE_COUNT_MASK				(0x3f << 0)
>>> +#define  PREPARE_COUNT_MASK_CHV				(0xff << 0)
>>> +#define  PREPARE_COUNT_SHIFT				0
>>>  
>>>  /* bits 31:0 */
>>>  #define _MIPIA_DBI_BW_CTRL		(dev_priv->mipi_mmio_base + 0xb084)
>>> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>>> index 4d6ffa7b3e7b..8d3dea693840 100644
>>> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
>>> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>>> @@ -41,10 +41,17 @@
>>>  #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
>>>  #define MIPI_PORT_SHIFT			3
>>>  
>>> -#define PREPARE_CNT_MAX		0x3F
>>> -#define EXIT_ZERO_CNT_MAX	0x3F
>>> -#define CLK_ZERO_CNT_MAX	0xFF
>>> -#define TRAIL_CNT_MAX		0x1F
>>> +#define EXIT_ZERO_CNT_MAX(dev_priv) \
>>> +	((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT)
>>> +
>>> +#define TRAIL_CNT_MAX(dev_priv) \
>>> +	((IS_VALLEYVIEW(dev_priv) ? TRAIL_COUNT_MASK : TRAIL_COUNT_MASK_CHV) >> TRAIL_COUNT_SHIFT)
>>> +
>>> +#define CLK_ZERO_CNT_MAX(dev_priv) \
>>> +	(CLK_ZERO_COUNT_MASK >> CLK_ZERO_COUNT_SHIFT)
>>> +
>>> +#define PREPARE_CNT_MAX(dev_priv)					\
>>> +	((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT)
>>>  
>>>  #define NS_KHZ_RATIO 1000000
>>>  
>>> @@ -647,9 +654,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>>  	/* prepare count */
>>>  	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
>>>  
>>> -	if (prepare_cnt > PREPARE_CNT_MAX) {
>>> +	if (prepare_cnt > PREPARE_CNT_MAX(dev_priv)) {
>>>  		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
>>> -		prepare_cnt = PREPARE_CNT_MAX;
>>> +		prepare_cnt = PREPARE_CNT_MAX(dev_priv);
>>>  	}
>>>  
>>>  	/* exit zero count */
>>> @@ -667,9 +674,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>>  	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
>>>  		exit_zero_cnt += 1;
>>>  
>>> -	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
>>> +	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX(dev_priv)) {
>>>  		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
>>> -		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
>>> +		exit_zero_cnt = EXIT_ZERO_CNT_MAX(dev_priv);
>>>  	}
>>>  
>>>  	/* clk zero count */
>>> @@ -677,18 +684,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>>  				(tclk_prepare_clkzero -	ths_prepare_ns)
>>>  				* ui_den, ui_num * mul);
>>>  
>>> -	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
>>> +	if (clk_zero_cnt > CLK_ZERO_CNT_MAX(dev_priv)) {
>>>  		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
>>> -		clk_zero_cnt = CLK_ZERO_CNT_MAX;
>>> +		clk_zero_cnt = CLK_ZERO_CNT_MAX(dev_priv);
>>>  	}
>>>  
>>>  	/* trail count */
>>>  	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
>>>  	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
>>>  
>>> -	if (trail_cnt > TRAIL_CNT_MAX) {
>>> +	if (trail_cnt > TRAIL_CNT_MAX(dev_priv)) {
>>>  		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
>>> -		trail_cnt = TRAIL_CNT_MAX;
>>> +		trail_cnt = TRAIL_CNT_MAX(dev_priv);
>>>  	}
>>>  
>>>  	/* B080 */
>>> -- 
>>> 2.11.0

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/dsi: improve dphy param limits logging

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/dsi: improve dphy param limits logging
URL   : https://patchwork.freedesktop.org/series/41953/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
469811c2b803 drm/i915/dsi: improve dphy param limits logging
b6472fbf79b8 drm/i915/dsi: fix dphy param field widths and range checks for chv+
-:63: WARNING:LONG_LINE: line over 100 characters
#63: FILE: drivers/gpu/drm/i915/intel_dsi_vbt.c:45:
+	((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT)

-:72: WARNING:LONG_LINE: line over 100 characters
#72: FILE: drivers/gpu/drm/i915/intel_dsi_vbt.c:54:
+	((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT)

total: 0 errors, 2 warnings, 0 checks, 86 lines checked

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.SPARSE: warning for series starting with [1/2] drm/i915/dsi: improve dphy param limits logging

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/dsi: improve dphy param limits logging
URL   : https://patchwork.freedesktop.org/series/41953/
State : warning

== Summary ==

$ dim sparse origin/drm-tip
Commit: drm/i915/dsi: improve dphy param limits logging
-O:drivers/gpu/drm/i915/intel_dsi_vbt.c:671:25: warning: expression using sizeof(void)
-O:drivers/gpu/drm/i915/intel_dsi_vbt.c:671:25: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_dsi_vbt.c:686:25: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_dsi_vbt.c:686:25: warning: expression using sizeof(void)

Commit: drm/i915/dsi: fix dphy param field widths and range checks for chv+
-O:drivers/gpu/drm/i915/intel_dsi_vbt.c:686:25: warning: expression using sizeof(void)
-O:drivers/gpu/drm/i915/intel_dsi_vbt.c:686:25: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_dsi_vbt.c:693:25: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_dsi_vbt.c:693:25: warning: expression using sizeof(void)

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/dsi: improve dphy param limits logging

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/dsi: improve dphy param limits logging
URL   : https://patchwork.freedesktop.org/series/41953/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4067 -> Patchwork_8748 =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/41953/revisions/1/mbox/

== Known issues ==

  Here are the changes found in Patchwork_8748 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_suspend@basic-s3:
      fi-ivb-3520m:       PASS -> DMESG-WARN (fdo#106084)

    igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
      fi-elk-e7500:       PASS -> INCOMPLETE (fdo#103989)

    igt@pm_rpm@basic-rte:
      fi-glk-1:           NOTRUN -> INCOMPLETE (k.org#198133, fdo#103359)

    
    ==== Possible fixes ====

    igt@gem_mmap_gtt@basic-small-bo-tiledx:
      fi-gdg-551:         FAIL (fdo#102575) -> PASS

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
      fi-ivb-3520m:       DMESG-WARN (fdo#106084) -> PASS
      fi-skl-guc:         FAIL (fdo#103191) -> PASS

    
  fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
  fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
  fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
  fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
  fdo#106084 https://bugs.freedesktop.org/show_bug.cgi?id=106084
  k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133


== Participating hosts (34 -> 32) ==

  Additional (1): fi-glk-1 
  Missing    (3): fi-ctg-p8600 fi-ilk-m540 fi-skl-6700hq 


== Build changes ==

    * Linux: CI_DRM_4067 -> Patchwork_8748

  CI_DRM_4067: 1c7ccdf37b04bedb10e2191d34dfbba62beb79ea @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4441: 83ba5b7d3bde48b383df41792fc9c955a5a23bdb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_8748: b6472fbf79b8a753fd55d7ec7a93f484ad61bae1 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4441: e60d247eb359f044caf0c09904da14e39d7adca1 @ git://anongit.freedesktop.org/piglit


== Linux commits ==

b6472fbf79b8 drm/i915/dsi: fix dphy param field widths and range checks for chv+
469811c2b803 drm/i915/dsi: improve dphy param limits logging

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8748/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/2] drm/i915/dsi: improve dphy param limits logging

[Ville Syrjälä]

On Thu, Apr 19, 2018 at 11:59:39AM +0300, Jani Nikula wrote:
> Move the limit checks near the calculations for each field, and actually
> log the values that exceed limits.
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dsi_vbt.c | 34 ++++++++++++++++++----------------
>  1 file changed, 18 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> index 91c07b0c8db9..4d6ffa7b3e7b 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> @@ -647,6 +647,11 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  	/* prepare count */
>  	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
>  
> +	if (prepare_cnt > PREPARE_CNT_MAX) {
> +		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
> +		prepare_cnt = PREPARE_CNT_MAX;
> +	}
> +
>  	/* exit zero count */
>  	exit_zero_cnt = DIV_ROUND_UP(
>  				(ths_prepare_hszero - ths_prepare_ns) * ui_den,
> @@ -662,32 +667,29 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
>  		exit_zero_cnt += 1;
>  
> +	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
> +		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
> +		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
> +	}
> +
>  	/* clk zero count */
>  	clk_zero_cnt = DIV_ROUND_UP(
>  				(tclk_prepare_clkzero -	ths_prepare_ns)
>  				* ui_den, ui_num * mul);
>  
> +	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
> +		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
> +		clk_zero_cnt = CLK_ZERO_CNT_MAX;
> +	}
> +
>  	/* trail count */
>  	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
>  	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
>  
> -	if (prepare_cnt > PREPARE_CNT_MAX ||
> -		exit_zero_cnt > EXIT_ZERO_CNT_MAX ||
> -		clk_zero_cnt > CLK_ZERO_CNT_MAX ||
> -		trail_cnt > TRAIL_CNT_MAX)
> -		DRM_DEBUG_DRIVER("Values crossing maximum limits, restricting to max values\n");
> -
> -	if (prepare_cnt > PREPARE_CNT_MAX)
> -		prepare_cnt = PREPARE_CNT_MAX;
> -
> -	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX)
> -		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
> -
> -	if (clk_zero_cnt > CLK_ZERO_CNT_MAX)
> -		clk_zero_cnt = CLK_ZERO_CNT_MAX;
> -
> -	if (trail_cnt > TRAIL_CNT_MAX)
> +	if (trail_cnt > TRAIL_CNT_MAX) {
> +		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
>  		trail_cnt = TRAIL_CNT_MAX;
> +	}
>  
>  	/* B080 */
>  	intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
> -- 
> 2.11.0

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915/dsi: improve dphy param limits logging

[Patchwork]

== Series Details ==

Series: series starting with [1/2] drm/i915/dsi: improve dphy param limits logging
URL   : https://patchwork.freedesktop.org/series/41953/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4067_full -> Patchwork_8748_full =

== Summary - WARNING ==

  Minor unknown changes coming with Patchwork_8748_full need to be verified
  manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_8748_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/41953/revisions/1/mbox/

== Possible new issues ==

  Here are the unknown changes that may have been introduced in Patchwork_8748_full:

  === IGT changes ===

    ==== Warnings ====

    igt@gem_exec_schedule@deep-bsd2:
      shard-kbl:          SKIP -> PASS +3

    
== Known issues ==

  Here are the changes found in Patchwork_8748_full that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@drv_hangman@error-state-capture-blt:
      shard-snb:          PASS -> INCOMPLETE (fdo#103880)

    igt@gem_ppgtt@blt-vs-render-ctx0:
      shard-kbl:          PASS -> INCOMPLETE (fdo#106023, fdo#103665)

    igt@kms_chv_cursor_fail@pipe-b-128x128-bottom-edge:
      shard-apl:          PASS -> FAIL (fdo#104671)

    igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
      shard-hsw:          PASS -> FAIL (fdo#102887)

    
    ==== Possible fixes ====

    igt@kms_flip@wf_vblank-ts-check-interruptible:
      shard-apl:          FAIL (fdo#100368) -> PASS

    
  fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
  fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
  fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
  fdo#103880 https://bugs.freedesktop.org/show_bug.cgi?id=103880
  fdo#104671 https://bugs.freedesktop.org/show_bug.cgi?id=104671
  fdo#106023 https://bugs.freedesktop.org/show_bug.cgi?id=106023


== Participating hosts (6 -> 4) ==

  Missing    (2): shard-glk shard-glkb 


== Build changes ==

    * Linux: CI_DRM_4067 -> Patchwork_8748

  CI_DRM_4067: 1c7ccdf37b04bedb10e2191d34dfbba62beb79ea @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4441: 83ba5b7d3bde48b383df41792fc9c955a5a23bdb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_8748: b6472fbf79b8a753fd55d7ec7a93f484ad61bae1 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4441: e60d247eb359f044caf0c09904da14e39d7adca1 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8748/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx