From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Arun Siluvery <arun.siluvery@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 1/4] drm/i915: Enable WA batch buffers for Gen9
Date: Fri, 10 Jul 2015 18:52:10 +0300 [thread overview]
Message-ID: <874mlcnh79.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <1436199161-3641-2-git-send-email-arun.siluvery@linux.intel.com>
Arun Siluvery <arun.siluvery@linux.intel.com> writes:
> This patch only enables support for Gen9, the actual WA will be
> initialized in subsequent patches.
>
> The WARN that we use to warn user if WA batch support is not available
> for a particular Gen is replaced with DRM_ERROR as warning here doesn't
> really add much value.
>
> v2: include all infrastructure bits in this patch so that subsequent
> changes only correspond the WA added (Chris)
>
> Cc: Imre Deak <imre.deak@intel.com>
> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
The wa_ctx_emits need index as second param now. With those,
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
> ---
> drivers/gpu/drm/i915/intel_lrc.c | 50 +++++++++++++++++++++++++++++++++++++---
> 1 file changed, 47 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 23ff018..1e88b3b 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1269,6 +1269,35 @@ static int gen8_init_perctx_bb(struct intel_engine_cs *ring,
> return wa_ctx_end(wa_ctx, *offset = index, 1);
> }
>
> +static int gen9_init_indirectctx_bb(struct intel_engine_cs *ring,
> + struct i915_wa_ctx_bb *wa_ctx,
> + uint32_t *const batch,
> + uint32_t *offset)
> +{
> + uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS);
> +
> + /* FIXME: Replace me with WA */
> + wa_ctx_emit(batch, MI_NOOP);
> +
> + /* Pad to end of cacheline */
> + while (index % CACHELINE_DWORDS)
> + wa_ctx_emit(batch, MI_NOOP);
> +
> + return wa_ctx_end(wa_ctx, *offset = index, CACHELINE_DWORDS);
> +}
> +
> +static int gen9_init_perctx_bb(struct intel_engine_cs *ring,
> + struct i915_wa_ctx_bb *wa_ctx,
> + uint32_t *const batch,
> + uint32_t *offset)
> +{
> + uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS);
> +
> + wa_ctx_emit(batch, MI_BATCH_BUFFER_END);
> +
> + return wa_ctx_end(wa_ctx, *offset = index, 1);
> +}
> +
> static int lrc_setup_wa_ctx_obj(struct intel_engine_cs *ring, u32 size)
> {
> int ret;
> @@ -1310,10 +1339,11 @@ static int intel_init_workaround_bb(struct intel_engine_cs *ring)
> WARN_ON(ring->id != RCS);
>
> /* update this when WA for higher Gen are added */
> - if (WARN(INTEL_INFO(ring->dev)->gen > 8,
> - "WA batch buffer is not initialized for Gen%d\n",
> - INTEL_INFO(ring->dev)->gen))
> + if (INTEL_INFO(ring->dev)->gen > 9) {
> + DRM_ERROR("WA batch buffer is not initialized for Gen%d\n",
> + INTEL_INFO(ring->dev)->gen);
> return 0;
> + }
>
> /* some WA perform writes to scratch page, ensure it is valid */
> if (ring->scratch.obj == NULL) {
> @@ -1345,6 +1375,20 @@ static int intel_init_workaround_bb(struct intel_engine_cs *ring)
> &offset);
> if (ret)
> goto out;
> + } else if (INTEL_INFO(ring->dev)->gen == 9) {
> + ret = gen9_init_indirectctx_bb(ring,
> + &wa_ctx->indirect_ctx,
> + batch,
> + &offset);
> + if (ret)
> + goto out;
> +
> + ret = gen9_init_perctx_bb(ring,
> + &wa_ctx->per_ctx,
> + batch,
> + &offset);
> + if (ret)
> + goto out;
> }
>
> out:
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-10 15:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 16:12 [PATCH v2 0/4] Gen9 WA Batch patches Arun Siluvery
2015-07-06 16:12 ` [PATCH v2 1/4] drm/i915: Enable WA batch buffers for Gen9 Arun Siluvery
2015-07-10 15:52 ` Mika Kuoppala [this message]
2015-07-10 16:16 ` Siluvery, Arun
2015-07-06 16:12 ` [PATCH v2 2/4] drm/i915/gen9: Add WaDisableCtxRestoreArbitration workaround Arun Siluvery
2015-07-07 17:41 ` Arun Siluvery
2015-07-13 12:31 ` Mika Kuoppala
2015-07-13 14:49 ` Daniel Vetter
2015-07-13 14:52 ` Daniel Vetter
2015-07-06 16:12 ` [PATCH v2 3/4] drm/i915/gen9: Add WaFlushCoherentL3CacheLinesAtContextSwitch workaround Arun Siluvery
2015-07-13 10:36 ` Arun Siluvery
2015-07-13 13:08 ` Mika Kuoppala
2015-07-06 16:12 ` [PATCH v2 4/4] drm/i915/gen9: Add WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken Arun Siluvery
2015-07-07 17:43 ` Arun Siluvery
2015-07-13 13:16 ` Mika Kuoppala
2015-07-14 9:34 ` Dave Gordon
2015-07-14 9:52 ` Mika Kuoppala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874mlcnh79.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=arun.siluvery@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox