From: Jani Nikula <jani.nikula@linux.intel.com>
To: Vipin Anand <vipin.anand@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 6/7] drm/i915/display: Reduce blanking to support 4k60@10bpp for LSPCON
Date: Tue, 07 Apr 2020 15:40:36 +0300 [thread overview]
Message-ID: <878sj7jwor.fsf@intel.com> (raw)
In-Reply-To: <20200327052357.22269-7-vipin.anand@intel.com>
On Fri, 27 Mar 2020, Vipin Anand <vipin.anand@intel.com> wrote:
> From: Uma Shankar <uma.shankar@intel.com>
>
> Blanking needs to be reduced to incorporate DP and HDMI timing/link
> bandwidth limitations for CEA modes (4k@60 at 10 bpp). DP can drive
> 17.28Gbs while 4k modes (VIC97 etc) at 10 bpp required 17.8 Gbps.
> This will cause mode to blank out. Reduced Htotal by shortening the
> back porch and front porch within permissible limits.
>
> v2: This is marked as Not for merge and the responsibilty to program
> these custom timings will be on userspace. This patch is just for
> reference purposes. This is based on Ville's recommendation.
This must be highlighted in the subject. HACK or whatever.
And even as a hack, don't change stuff in the .mode_valid hook. It
belongs to compute config.
BR,
Jani.
>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c7424e2a04a3..3ab1fadb2ea3 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -616,9 +616,11 @@ intel_dp_mode_valid(struct drm_connector *connector,
> {
> struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
> struct intel_connector *intel_connector = to_intel_connector(connector);
> + struct intel_encoder *intel_encoder = intel_attached_encoder(intel_connector);
> struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> int target_clock = mode->clock;
> + struct intel_lspcon *lspcon = enc_to_intel_lspcon(intel_encoder);
> int max_rate, mode_rate, max_lanes, max_link_clock;
> int max_dotclk;
> u16 dsc_max_output_bpp = 0;
> @@ -638,6 +640,20 @@ intel_dp_mode_valid(struct drm_connector *connector,
>
> target_clock = fixed_mode->clock;
> }
> + /*
> + * Reducing Blanking to incorporate DP and HDMI timing/link bandwidth
> + * limitations for CEA modes (4k@60 at 10 bpp). DP can drive 17.28Gbs
> + * while 4k modes (VIC97 etc) at 10 bpp required 17.8 Gbps. This will
> + * cause mode to blank out. Reduced Htotal by shortening the back porch
> + * and front porch within permissible limits.
> + */
> + if (lspcon->active && lspcon->hdr_supported &&
> + mode->clock > 570000) {
> + mode->clock = 570000;
> + mode->htotal -= 180;
> + mode->hsync_start -= 72;
> + mode->hsync_end -= 72;
> + }
>
> max_link_clock = intel_dp_max_link_rate(intel_dp);
> max_lanes = intel_dp_max_lane_count(intel_dp);
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-04-07 12:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 5:23 [Intel-gfx] [PATCH 0/7] Enable HDR on Gen9 devices with lspcon hdr capability Vipin Anand
2020-03-27 5:23 ` [Intel-gfx] [PATCH 1/7] drm/i915/display: Add HDR Capability detection for LSPCON Vipin Anand
2020-04-07 12:44 ` Jani Nikula
2020-03-27 5:23 ` [Intel-gfx] [PATCH 2/7] drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon Vipin Anand
2020-04-07 12:34 ` Jani Nikula
2020-03-27 5:23 ` [Intel-gfx] [PATCH 3/7] drm/i915/display: Attach HDR property for capable Gen9 devices Vipin Anand
2020-04-07 12:35 ` Jani Nikula
2020-03-27 5:23 ` [Intel-gfx] [PATCH 4/7] drm/i915/display: Set HDR Infoframe for HDR capable LSPCON devices Vipin Anand
2020-04-07 12:37 ` Jani Nikula
2020-04-07 12:37 ` Jani Nikula
2020-03-27 5:23 ` [Intel-gfx] [PATCH 5/7] drm/i915/display: Enable BT2020 for HDR on " Vipin Anand
2020-03-27 5:23 ` [Intel-gfx] [PATCH 6/7] drm/i915/display: Reduce blanking to support 4k60@10bpp for LSPCON Vipin Anand
2020-04-07 12:40 ` Jani Nikula [this message]
2020-03-27 5:23 ` [Intel-gfx] [PATCH 7/7] drm:i915:display: add checks for Gen9 devices with hdr capability Vipin Anand
2020-04-07 12:41 ` Jani Nikula
2020-03-27 5:44 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Enable HDR on Gen9 devices with lspcon " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878sj7jwor.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=vipin.anand@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox