From: Jani Nikula <jani.nikula@linux.intel.com>
To: Xiong Zhang <xiong.y.zhang@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 6/6 v3] drm/i915: Enable HDMI on DDI-E
Date: Mon, 31 Aug 2015 18:47:41 +0300 [thread overview]
Message-ID: <87a8t7xxwi.fsf@intel.com> (raw)
In-Reply-To: <1439798644-12653-1-git-send-email-xiong.y.zhang@intel.com>
On Mon, 17 Aug 2015, Xiong Zhang <xiong.y.zhang@intel.com> wrote:
> DDI-E doesn't have the correspondent GMBUS pin.
>
> We rely on VBT to tell us which one it being used instead.
>
> The DVI/HDMI on shared port couldn't exist.
>
> This patch isn't tested without hardware wchich has HDMI
> on DDI-E.
>
> v2: fix trailing whitespace
> v3: MISSING_CASE take place of BUG()
>
> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pushed to drm-intel-next-fixes.
BR,
Jani.
> ---
> drivers/gpu/drm/i915/i915_drv.h | 5 +++++
> drivers/gpu/drm/i915/intel_bios.c | 25 +++++++++++++++++++++----
> drivers/gpu/drm/i915/intel_hdmi.c | 21 +++++++++++++++++++++
> 3 files changed, 47 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 35192d2..22e8bf0 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1418,6 +1418,10 @@ enum modeset_restore {
> #define DP_AUX_C 0x20
> #define DP_AUX_D 0x30
>
> +#define DDC_PIN_B 0x05
> +#define DDC_PIN_C 0x04
> +#define DDC_PIN_D 0x06
> +
> struct ddi_vbt_port_info {
> /*
> * This is an index in the HDMI/DVI DDI buffer translation table.
> @@ -1432,6 +1436,7 @@ struct ddi_vbt_port_info {
> uint8_t supports_dp:1;
>
> uint8_t alternate_aux_channel;
> + uint8_t alternate_ddc_pin;
>
> uint8_t dp_boost_level;
> uint8_t hdmi_boost_level;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 8e46149..a2ee347 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -905,7 +905,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
> uint8_t hdmi_level_shift;
> int i, j;
> bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
> - uint8_t aux_channel;
> + uint8_t aux_channel, ddc_pin;
> /* Each DDI port can have more than one value on the "DVO Port" field,
> * so look for all the possible values for each port and abort if more
> * than one is found. */
> @@ -939,6 +939,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
> return;
>
> aux_channel = child->raw[25];
> + ddc_pin = child->common.ddc_pin;
>
> is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
> is_dp = child->common.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
> @@ -970,11 +971,27 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
> DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
>
> if (is_dvi) {
> - if (child->common.ddc_pin == 0x05 && port != PORT_B)
> + if (port == PORT_E) {
> + info->alternate_ddc_pin = ddc_pin;
> + /* if DDIE share ddc pin with other port, then
> + * dvi/hdmi couldn't exist on the shared port.
> + * Otherwise they share the same ddc bin and system
> + * couldn't communicate with them seperately. */
> + if (ddc_pin == DDC_PIN_B) {
> + dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0;
> + dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0;
> + } else if (ddc_pin == DDC_PIN_C) {
> + dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0;
> + dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0;
> + } else if (ddc_pin == DDC_PIN_D) {
> + dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0;
> + dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0;
> + }
> + } else if (ddc_pin == DDC_PIN_B && port != PORT_B)
> DRM_DEBUG_KMS("Unexpected DDC pin for port B\n");
> - if (child->common.ddc_pin == 0x04 && port != PORT_C)
> + else if (ddc_pin == DDC_PIN_C && port != PORT_C)
> DRM_DEBUG_KMS("Unexpected DDC pin for port C\n");
> - if (child->common.ddc_pin == 0x06 && port != PORT_D)
> + else if (ddc_pin == DDC_PIN_D && port != PORT_D)
> DRM_DEBUG_KMS("Unexpected DDC pin for port D\n");
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 7185062..d1a7f7b 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1956,6 +1956,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
> struct drm_device *dev = intel_encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> enum port port = intel_dig_port->port;
> + uint8_t alternate_ddc_pin;
>
> drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
> DRM_MODE_CONNECTOR_HDMIA);
> @@ -1996,6 +1997,26 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
> intel_hdmi->ddc_bus = GMBUS_PIN_DPD;
> intel_encoder->hpd_pin = HPD_PORT_D;
> break;
> + case PORT_E:
> + /* On SKL PORT E doesn't have seperate GMBUS pin
> + * We rely on VBT to set a proper alternate GMBUS pin. */
> + alternate_ddc_pin =
> + dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin;
> + switch (alternate_ddc_pin) {
> + case DDC_PIN_B:
> + intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
> + break;
> + case DDC_PIN_C:
> + intel_hdmi->ddc_bus = GMBUS_PIN_DPC;
> + break;
> + case DDC_PIN_D:
> + intel_hdmi->ddc_bus = GMBUS_PIN_DPD;
> + break;
> + default:
> + MISSING_CASE(alternate_ddc_pin);
> + }
> + intel_encoder->hpd_pin = HPD_PORT_E;
> + break;
> case PORT_A:
> intel_encoder->hpd_pin = HPD_PORT_A;
> /* Internal port only for eDP. */
> --
> 2.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-31 15:47 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 7:51 [PATCH 1/6] drm/i915/skl: Enable DDI-E Xiong Zhang
2015-08-06 7:51 ` [PATCH 2/6] drm/i915: Set power domain for DDI-E Xiong Zhang
2015-08-11 6:12 ` Zhang, Xiong Y
2015-08-06 7:51 ` [PATCH 3/6] drm/i915: Set alternate aux " Xiong Zhang
2015-08-08 0:01 ` [PATCH] " Rodrigo Vivi
2015-08-11 6:18 ` Zhang, Xiong Y
2015-08-13 8:40 ` shuang.he
2015-08-06 7:51 ` [PATCH 4/6] drm/i915: eDP can be present on DDI-E Xiong Zhang
2015-08-11 6:27 ` Zhang, Xiong Y
2015-08-11 9:47 ` Daniel Vetter
2015-08-11 10:09 ` Zhang, Xiong Y
2015-08-11 18:42 ` Vivi, Rodrigo
2015-08-12 10:27 ` Zhang, Xiong Y
2015-08-12 12:32 ` Daniel Vetter
2015-08-12 16:38 ` Vivi, Rodrigo
2015-08-31 15:47 ` Jani Nikula
2015-08-06 7:51 ` [PATCH 5/6] drm/i915/skl: enable DDIE hotplug Xiong Zhang
2015-08-08 0:06 ` Rodrigo Vivi
2015-08-10 6:53 ` [PATCH 5/6 v2] drm/i915/skl: enable DDI-E hotplug Xiong Zhang
2015-08-17 7:55 ` [PATCH 5/6 v3] " Xiong Zhang
2015-08-26 7:25 ` Jani Nikula
2015-08-06 7:51 ` [PATCH 6/6] drm/i915: Enable HDMI on DDI-E Xiong Zhang
2015-08-08 0:09 ` Rodrigo Vivi
2015-08-11 9:58 ` Daniel Vetter
2015-08-12 10:39 ` [PATCH 6/6 v3] " Xiong Zhang
2015-08-12 12:33 ` Daniel Vetter
2015-08-13 2:57 ` Zhang, Xiong Y
2015-08-14 8:42 ` Daniel Vetter
2015-08-14 10:38 ` Zhang, Xiong Y
2015-08-17 8:04 ` Xiong Zhang
2015-08-31 15:47 ` Jani Nikula [this message]
2015-08-12 14:19 ` [PATCH 6/6] " shuang.he
2015-08-06 13:30 ` [PATCH 1/6] drm/i915/skl: Enable DDI-E Daniel Vetter
2015-08-06 15:37 ` Vivi, Rodrigo
2015-08-08 0:35 ` [PATCH 8/6] " Rodrigo Vivi
2015-08-11 7:12 ` Zhang, Xiong Y
2015-08-31 15:48 ` Jani Nikula
2015-08-06 15:14 ` [PATCH 1/6] " Daniel Vetter
2015-08-06 15:50 ` Vivi, Rodrigo
2015-08-08 0:33 ` [PATCH 7/6] drm/i915/skl: DDI-E and DDI-A shares 4 lanes Rodrigo Vivi
2015-08-11 7:05 ` Zhang, Xiong Y
2015-08-11 18:38 ` Vivi, Rodrigo
2015-08-12 2:20 ` Zhang, Xiong Y
2015-08-12 16:51 ` Vivi, Rodrigo
2015-08-13 3:27 ` Zhang, Xiong Y
2015-08-13 5:48 ` Jindal, Sonika
2015-08-26 8:15 ` Jani Nikula
2015-08-26 16:38 ` Vivi, Rodrigo
2015-08-27 2:52 ` Zhang, Xiong Y
2015-08-27 14:31 ` Timo Aaltonen
2015-08-27 17:59 ` Vivi, Rodrigo
2015-08-12 21:29 ` Timo Aaltonen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a8t7xxwi.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=xiong.y.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox