From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: deepak.s@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions
Date: Fri, 11 Jul 2014 18:53:12 +0300 [thread overview]
Message-ID: <87a98fki3b.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <1405157073-15248-1-git-send-email-deepak.s@linux.intel.com>
deepak.s@linux.intel.com writes:
> From: Deepak S <deepak.s@linux.intel.com>
>
> Adding chv specific fre/encode conversion.
>
> v2: Remove generic function and platform check (Daniel)
>
> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
> ---
> drivers/gpu/drm/i915/intel_pm.c | 78 +++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 76 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 6892421..f673e1b 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -6931,7 +6931,7 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
> return 0;
> }
>
> -int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
> +int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
> {
> int div;
>
> @@ -6953,7 +6953,7 @@ int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
> return DIV_ROUND_CLOSEST(dev_priv->mem_freq * (val + 6 - 0xbd), 4 * div);
> }
>
> -int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
> +int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
> {
> int mul;
>
> @@ -6975,6 +6975,80 @@ int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
> return DIV_ROUND_CLOSEST(4 * mul * val, dev_priv->mem_freq) + 0xbd - 6;
> }
>
> +int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
> +{
> + int div, freq;
> +
> + switch (dev_priv->rps.cz_freq) {
> + case 200:
> + div = 5;
> + break;
> + case 267:
> + div = 6;
> + break;
> + case 320:
> + case 333:
> + case 400:
> + div = 8;
> + break;
> + default:
> + return -1;
> + }
> +
> + freq = (DIV_ROUND_CLOSEST((dev_priv->rps.cz_freq * val), 2 * div) / 2);
> +
> + return freq;
> +}
> +
> +int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
> +{
> + int mul, opcode;
> +
> + switch (dev_priv->rps.cz_freq) {
> + case 200:
> + mul = 5;
> + break;
> + case 267:
> + mul = 6;
> + break;
> + case 320:
> + case 333:
> + case 400:
> + mul = 8;
> + break;
> + default:
> + return -1;
> + }
> +
> + opcode = (DIV_ROUND_CLOSEST((val * 2 * mul), dev_priv->rps.cz_freq) * 2);
> +
> + return opcode;
> +}
> +
> +int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val)
> +{
> + int ret = -1;
> +
> + if (IS_CHERRYVIEW(dev_priv->dev))
> + ret = chv_gpu_freq(dev_priv, val);
> + else if (IS_VALLEYVIEW(dev_priv->dev))
> + ret = byt_gpu_freq(dev_priv, val);
> +
> + return ret;
> +}
> +
> +int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val)
> +{
> + int ret = -1;
> +
> + if (IS_CHERRYVIEW(dev_priv->dev))
> + ret = chv_freq_opcode(dev_priv, val);
> + else if (IS_VALLEYVIEW(dev_priv->dev))
> + ret = byt_freq_opcode(dev_priv, val);
> +
> + return ret;
> +}
> +
> void intel_pm_setup(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-07-11 15:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 7:46 [PATCH 0/7] Enable RP1/RPn/RP0 sysfs and enable CHV PM interrupt deepak.s
2014-07-10 7:46 ` [PATCH 1/7] drm/i915: Read guaranteed freq for valleyview deepak.s
2014-07-11 14:42 ` Mika Kuoppala
2014-07-11 15:56 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 2/7] drm/i915: Add RP0/RP1/RPn render P state thresholds in VLV sysfs deepak.s
2014-07-11 14:44 ` Mika Kuoppala
2014-07-11 16:00 ` Daniel Vetter
2014-07-10 7:46 ` [PATCH 3/7] drm/i915: keep freq/opcode conversion function more generic deepak.s
2014-07-09 12:03 ` Daniel Vetter
2014-07-11 4:26 ` Deepak S
2014-07-10 6:28 ` Daniel Vetter
2014-07-11 6:50 ` Deepak S
2014-07-10 7:46 ` [PATCH 4/7] drm/i915: populate mem_freq/cz_clock for chv deepak.s
2014-07-11 14:50 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 5/7] drm/i915: CHV GPU frequency to opcode functions deepak.s
2014-07-10 7:46 ` [PATCH 6/7] drm/i915/chv: Add basic PM interrupt support for CHV deepak.s
2014-07-11 15:03 ` Mika Kuoppala
2014-07-10 7:46 ` [PATCH 7/7] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-12 9:24 ` [PATCH v2 1/3] drm/i915: CHV GPU frequency to opcode functions deepak.s
2014-07-11 15:53 ` Mika Kuoppala [this message]
2014-07-11 15:58 ` Daniel Vetter
2014-07-12 13:16 ` [PATCH v2] drm/i915: Add RP1 render P state thresholds in CHV deepak.s
2014-07-11 16:07 ` Mika Kuoppala
2014-07-11 16:22 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a98fki3b.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=deepak.s@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox