From: Jani Nikula <jani.nikula@intel.com>
To: Bertrik Sikken <bertrik@sikken.nl>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: [REGRESSION BISECTED] backlight control stops workin with 3.14 and later
Date: Fri, 22 Aug 2014 09:48:24 +0300 [thread overview]
Message-ID: <87d2btm347.fsf@intel.com> (raw)
In-Reply-To: <53F66849.4010608@sikken.nl>
On Fri, 22 Aug 2014, Bertrik Sikken <bertrik@sikken.nl> wrote:
> On 19-8-2014 3:29, Jani Nikula wrote:
>> On Tue, 19 Aug 2014, Bertrik Sikken <bertrik@sikken.nl> wrote:
>>>> On Sun, 17 Aug 2014, Bertrik Sikken <bertrik@sikken.nl> wrote:
>>>>> On 15-8-2014 3:43, Jani Nikula wrote:
>>>>>> On Thu, 14 Aug 2014, Bertrik Sikken <bertrik@sikken.nl> wrote:
>>>>>
>>>>>>> Attached is dmesg output from booting kernel 3.14-2 (debian unstable)
>>>>>>> with drm.debug=0xe and the samsung_laptop module enabled, from my
>>>>>>> Samsung N150plus netbook.
>>>>>>
>>>>>> Have you tried 3.15?
>>>>>
>>>>> I've built the v3.15 kernel (using the .config file from debian
>>>>> unstable and doing make oldconfig).
>>>>>
>>>>> The backlight is at maximum brightness after boot and I can't control
>>>>> it using the backlight buttons, nor by writing to
>>>>> /sys/class/backlight/samsung/brightness
>>>>> (say half the value or 1/10th of max_brightness)
>>>>>
>>>>> Backlight does work when writing
>>>>> /sys/class/backlight/intel_backlight/brightness
>>>>
>>>> How about disabling samsung backlight module with 3.15?
>>>
>>> I'm not sure what you mean by that.
>>>
>>> As I understand it, there are three ways to control the backlight on this
>>> netbook: using intel_backlight, samsung_laptop (using a "sabi" interface)
>>> and acpi_video.
>>> Backlight control using the samsung_laptop driver no longer seems to work
>>> after the change. If I disable it (e.g. by blacklisting it), I expect it
>>> to no longer work at all obviously.
>>>
>>> What do you want me to test exactly?
>>
>> If the intel_backlight interface works in 3.15, I presume the problem is
>> that you have a non-functional samsung backlight interface that is
>> preferred over intel_backlight by your userspace.
>
> I tested the intel_backlight interface in linux v3.15 with the samsung
> backlight module blacklisted. The intel_backlight interface still works.
I read that as, "I no longer have problems with backlight".
Jani.
>
> Regards,
> Bertrik
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2014-08-22 6:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-22 6:42 [REGRESSION BISECTED] backlight control stops workin with 3.14 and later Hans de Goede
2014-07-22 6:52 ` Daniel Vetter
2014-07-22 6:59 ` Chris Wilson
2014-07-23 8:46 ` Hans de Goede
2014-07-23 13:15 ` Bertrik Sikken
2014-08-13 13:43 ` Jani Nikula
2014-08-14 19:45 ` Bertrik Sikken
2014-08-15 13:43 ` Jani Nikula
2014-08-17 8:44 ` Bertrik Sikken
2014-08-18 7:37 ` Jani Nikula
2014-08-19 9:52 ` Bertrik Sikken
2014-08-19 13:29 ` Jani Nikula
2014-08-21 21:44 ` Bertrik Sikken
2014-08-22 6:48 ` Jani Nikula [this message]
2014-08-22 10:52 ` Bertrik Sikken
2014-08-23 13:11 ` Hans de Goede
2014-08-25 7:29 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d2btm347.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=bertrik@sikken.nl \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox