From: Jani Nikula <jani.nikula@linux.intel.com>
To: Durgadoss R <durgadoss.r@intel.com>, intel-gfx@lists.freedesktop.org
Cc: "Syrjala, Ville" <ville.syrjala@intel.com>,
"Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH v2] drm/i915: Add debugfs to read any DPCD register
Date: Thu, 16 Apr 2015 17:07:00 +0300 [thread overview]
Message-ID: <87egnkp3p7.fsf@intel.com> (raw)
In-Reply-To: <1428493301-20293-1-git-send-email-durgadoss.r@intel.com>
On Wed, 08 Apr 2015, Durgadoss R <durgadoss.r@intel.com> wrote:
> This patch creates a connector specific debugfs
> interface to read any particular DPCD register.
> The DPCD register address (hex format) is written
> to 'i915_dpcd_addr' interface and the corresponding
> value can be read from 'i915_dpcd_val' interface.
>
> Example usage:
> echo 0x70 > i915_dpcd_addr
> cat i915_dpcd_val
> 0x1
>
> v2: Address Jani's comments.
So, code-wise this looks good to me.
But like I said in my review of v1, I am undecided on whether we want to
have this interface or not. I could really be persuaded either way.
Perhaps Ville or Paulo have an opinion?
BR,
Jani.
>
> Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 88 ++++++++++++++++++++++++++++++++++++-
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 2 files changed, 88 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 10ca511..f1f365e 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -4865,6 +4865,87 @@ static const struct file_operations i915_dpcd_fops = {
> .release = single_release,
> };
>
> +static ssize_t i915_dpcd_addr_write(struct file *file, const char __user *ubuf,
> + size_t len, loff_t *offp)
> +{
> + struct seq_file *m = file->private_data;
> + struct drm_connector *connector = m->private;
> + struct intel_dp *intel_dp =
> + enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> + unsigned int reg_addr;
> + char tmp[16];
> +
> + if (len >= sizeof(tmp))
> + return -EINVAL;
> +
> + if (copy_from_user(tmp, ubuf, len))
> + return -EFAULT;
> +
> + tmp[len] = '\0';
> +
> + if (kstrtouint(tmp, 16, ®_addr))
> + return -EINVAL;
> +
> + intel_dp->debugfs_dpcd_addr = reg_addr;
> +
> + return len;
> +}
> +
> +static int i915_dpcd_addr_show(struct seq_file *m, void *data)
> +{
> + struct drm_connector *connector = m->private;
> + struct intel_dp *intel_dp =
> + enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> +
> + seq_printf(m, "0x%x\n", intel_dp->debugfs_dpcd_addr);
> +
> + return 0;
> +}
> +
> +static int i915_dpcd_addr_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, i915_dpcd_addr_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dpcd_addr_fops = {
> + .owner = THIS_MODULE,
> + .open = i915_dpcd_addr_open,
> + .read = seq_read,
> + .write = i915_dpcd_addr_write,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> +static int i915_dpcd_val_show(struct seq_file *m, void *data)
> +{
> + struct drm_connector *connector = m->private;
> + struct intel_dp *intel_dp =
> + enc_to_intel_dp(&intel_attached_encoder(connector)->base);
> + u8 val;
> + int ret;
> +
> + ret = drm_dp_dpcd_readb(&intel_dp->aux,
> + intel_dp->debugfs_dpcd_addr, &val);
> + if (ret < 0)
> + return ret;
> +
> + seq_printf(m, "0x%x\n", val);
> + return 0;
> +}
> +
> +static int i915_dpcd_val_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, i915_dpcd_val_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dpcd_val_fops = {
> + .owner = THIS_MODULE,
> + .open = i915_dpcd_val_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> /**
> * i915_debugfs_connector_add - add i915 specific connector debugfs files
> * @connector: pointer to a registered drm_connector
> @@ -4883,9 +4964,14 @@ int i915_debugfs_connector_add(struct drm_connector *connector)
> return -ENODEV;
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> + connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
> debugfs_create_file("i915_dpcd", S_IRUGO, root, connector,
> &i915_dpcd_fops);
> + debugfs_create_file("i915_dpcd_addr", S_IRUGO | S_IWUSR,
> + root, connector, &i915_dpcd_addr_fops);
> + debugfs_create_file("i915_dpcd_val", S_IRUGO, root,
> + connector, &i915_dpcd_val_fops);
> + }
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 4799b11..0594baa 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -642,6 +642,7 @@ struct intel_dp {
> unsigned long last_power_cycle;
> unsigned long last_power_on;
> unsigned long last_backlight_off;
> + unsigned int debugfs_dpcd_addr;
>
> struct notifier_block edp_notifier;
>
> --
> 1.9.1
>
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-16 14:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-08 11:41 [PATCH v2] drm/i915: Add debugfs to read any DPCD register Durgadoss R
2015-04-16 14:07 ` Jani Nikula [this message]
2015-04-16 14:32 ` Ville Syrjälä
2015-04-17 6:33 ` R, Durgadoss
2015-04-17 10:00 ` Ville Syrjälä
2015-04-20 11:29 ` R, Durgadoss
2015-04-20 15:44 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87egnkp3p7.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=durgadoss.r@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox