public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	Daniel Vetter <daniel.vetter@intel.com>
Subject: Re: [PATCH] drm/i915: Stop gathering error states for CS	error interrupts
Date: Tue, 04 Nov 2014 17:02:57 +0200	[thread overview]
Message-ID: <87egtjdn4u.fsf@intel.com> (raw)
In-Reply-To: <1415112742-24955-1-git-send-email-daniel.vetter@ffwll.ch>

On Tue, 04 Nov 2014, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> There's quite a few bug reports with error states where the error
> reasons makes just about no sense at all. Like dying on tlbs for a
> display plane that's not even there. Also users don't really report a
> lot of bad side effects generally, just the error states.
>
> Furthermore we don't even enable these interrupts any more on gen5+
> (though the handling code is still there). So this mostly concerns old
> platforms.
>
> Given all that lets make our lives a bit easier and stop capturing
> error states, in the hopes that we can just ignore them. In case
> that's not true and the gpu indeed dies the hangcheck should
> eventually kick in. And I've left some debug log in to make this case
> noticeble. Referenced bug is just an example.
>
> References: https://bugs.freedesktop.org/show_bug.cgi?id=82095
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c | 25 +++++++------------------
>  1 file changed, 7 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 318a6a0724d0..2f78764cb215 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1319,10 +1319,8 @@ static void snb_gt_irq_handler(struct drm_device *dev,
>  
>  	if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
>  		      GT_BSD_CS_ERROR_INTERRUPT |
> -		      GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) {
> -		i915_handle_error(dev, false, "GT error interrupt 0x%08x",
> -				  gt_iir);
> -	}
> +		      GT_RENDER_CS_MASTER_ERROR_INTERRUPT))
> +		DRM_DEBUG("Command parser error, gt_iir 0x%08x", gt_iir);

\n missing all around.

BR,
Jani.

>  
>  	if (gt_iir & GT_PARITY_ERROR(dev))
>  		ivybridge_parity_error_irq_handler(dev, gt_iir);
> @@ -1715,11 +1713,8 @@ static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
>  		if (pm_iir & PM_VEBOX_USER_INTERRUPT)
>  			notify_ring(dev_priv->dev, &dev_priv->ring[VECS]);
>  
> -		if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) {
> -			i915_handle_error(dev_priv->dev, false,
> -					  "VEBOX CS error interrupt 0x%08x",
> -					  pm_iir);
> -		}
> +		if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT)
> +			DRM_DEBUG("Command parser error, pm_iir 0x%08x", pm_iir);
>  	}
>  }
>  
> @@ -3744,9 +3739,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
>  		 */
>  		spin_lock(&dev_priv->irq_lock);
>  		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
> -			i915_handle_error(dev, false,
> -					  "Command parser error, iir 0x%08x",
> -					  iir);
> +			DRM_DEBUG("Command parser error, iir 0x%08x", iir);
>  
>  		for_each_pipe(dev_priv, pipe) {
>  			int reg = PIPESTAT(pipe);
> @@ -3929,9 +3922,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
>  		 */
>  		spin_lock(&dev_priv->irq_lock);
>  		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
> -			i915_handle_error(dev, false,
> -					  "Command parser error, iir 0x%08x",
> -					  iir);
> +			DRM_DEBUG("Command parser error, iir 0x%08x", iir);
>  
>  		for_each_pipe(dev_priv, pipe) {
>  			int reg = PIPESTAT(pipe);
> @@ -4156,9 +4147,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
>  		 */
>  		spin_lock(&dev_priv->irq_lock);
>  		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
> -			i915_handle_error(dev, false,
> -					  "Command parser error, iir 0x%08x",
> -					  iir);
> +			DRM_DEBUG("Command parser error, iir 0x%08x", iir);
>  
>  		for_each_pipe(dev_priv, pipe) {
>  			int reg = PIPESTAT(pipe);
> -- 
> 2.1.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2014-11-04 15:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-04 14:52 [PATCH] drm/i915: Stop gathering error states for CS error interrupts Daniel Vetter
2014-11-04 15:02 ` Jani Nikula [this message]
2014-11-05  8:35 ` Chris Wilson
2014-11-05  9:56   ` Daniel Vetter
2014-11-24 20:57     ` Daniel Vetter
2014-11-24 21:42       ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87egtjdn4u.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox