public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Mika Kuoppala <mika.kuoppala@linux.intel.com>,
	ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/2] drm/i915: Fix scanline counter fixup on BDW
Date: Wed, 12 Mar 2014 18:46:30 +0200	[thread overview]
Message-ID: <87eh27tleh.fsf@intel.com> (raw)
In-Reply-To: <87d2hsq24u.fsf@gaia.fi.intel.com>

On Tue, 11 Mar 2014, Mika Kuoppala <mika.kuoppala@linux.intel.com> wrote:
> ville.syrjala@linux.intel.com writes:
>
>> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>>
>> The display interrupts changed on BDW, so the current ILK-HSW specific
>> code in ilk_pipe_in_vblank_locked() doesn't work there. Add the required
>> bits for BDW, and while at it, change the existing code to use nicer
>> looking vblank status bit macros.
>>
>> Also remove the now stale __raw_i915_read16() definition which was
>> left over from the failed gen2 ISR experiment.
>>
>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73962
>> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Both patches,
> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

Both pushed to -fixes, thanks for the patches and review.

Jani.



>
> With regards to changing raw reads to I915_READ:
> I would rather keep the raw_reads here to
> keep the same locking behaviour, for now. Referring to this
> comment in i915_get_crtc_scanoutpos:
>
> /*
>  * Lock uncore.lock, as we will do multiple timing critical raw
>  * register reads, potentially with preemption disabled, so the
>  * following code must not block on uncore.lock.
>  */
>
> -Mika
>
>>  drivers/gpu/drm/i915/i915_irq.c | 30 +++++++++++-------------------
>>  1 file changed, 11 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
>> index d4c952d..ec9b8a4 100644
>> --- a/drivers/gpu/drm/i915/i915_irq.c
>> +++ b/drivers/gpu/drm/i915/i915_irq.c
>> @@ -618,33 +618,25 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
>>  
>>  /* raw reads, only for fast reads of display block, no need for forcewake etc. */
>>  #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
>> -#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__))
>>  
>>  static bool ilk_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
>>  {
>>  	struct drm_i915_private *dev_priv = dev->dev_private;
>>  	uint32_t status;
>> -
>> -	if (INTEL_INFO(dev)->gen < 7) {
>> -		status = pipe == PIPE_A ?
>> -			DE_PIPEA_VBLANK :
>> -			DE_PIPEB_VBLANK;
>> +	int reg;
>> +
>> +	if (INTEL_INFO(dev)->gen >= 8) {
>> +		status = GEN8_PIPE_VBLANK;
>> +		reg = GEN8_DE_PIPE_ISR(pipe);
>> +	} else if (INTEL_INFO(dev)->gen >= 7) {
>> +		status = DE_PIPE_VBLANK_IVB(pipe);
>> +		reg = DEISR;
>>  	} else {
>> -		switch (pipe) {
>> -		default:
>> -		case PIPE_A:
>> -			status = DE_PIPEA_VBLANK_IVB;
>> -			break;
>> -		case PIPE_B:
>> -			status = DE_PIPEB_VBLANK_IVB;
>> -			break;
>> -		case PIPE_C:
>> -			status = DE_PIPEC_VBLANK_IVB;
>> -			break;
>> -		}
>> +		status = DE_PIPE_VBLANK(pipe);
>> +		reg = DEISR;
>>  	}
>>  
>> -	return __raw_i915_read32(dev_priv, DEISR) & status;
>> +	return __raw_i915_read32(dev_priv, reg) & status;
>>  }
>>  
>>  static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
>> -- 
>> 1.8.3.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

      reply	other threads:[~2014-03-12 16:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-11 10:58 [PATCH v2 1/2] drm/i915: Add a workaround for HSW scanline counter weirdness ville.syrjala
2014-03-11 10:58 ` [PATCH 2/2] drm/i915: Fix scanline counter fixup on BDW ville.syrjala
2014-03-11 11:38   ` Daniel Vetter
2014-03-11 12:01     ` Ville Syrjälä
2014-03-11 13:46   ` Mika Kuoppala
2014-03-12 16:46     ` Jani Nikula [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87eh27tleh.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=mika.kuoppala@linux.intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox