From: Jani Nikula <jani.nikula@linux.intel.com>
To: "Kumar, Abhay" <abhay.kumar@intel.com>,
"Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Subject: Re: [PATCH] drm/i915/audio: Fix audio detection issue on GLK
Date: Tue, 10 Apr 2018 14:02:29 +0300 [thread overview]
Message-ID: <87fu43iat6.fsf@intel.com> (raw)
In-Reply-To: <c481d0c8-95d7-d0d9-b3d6-7d2f738eb16a@intel.com>
On Mon, 09 Apr 2018, "Kumar, Abhay" <abhay.kumar@intel.com> wrote:
> On 4/9/2018 4:20 PM, Pandiyan, Dhinakaran wrote:
>>
>>
>> On Mon, 2018-04-09 at 12:18 -0700, Kumar, Abhay wrote:
>>> On 4/9/2018 12:10 PM, Rodrigo Vivi wrote:
>>>> On Mon, Apr 09, 2018 at 05:07:31PM +0300, Jani Nikula wrote:
>>>>> On Sun, 08 Apr 2018, Gaurav K Singh <gaurav.k.singh@intel.com> wrote:
>>>>>> On Geminilake, sometimes audio card is not getting
>>>>>> detected after reboot. This is a spurious issue happening on
>>>>>> Geminilake. HW codec and HD audio controller link was going
>>>>>> out of sync for which there was a fix in i915 driver but
>>>>>> was not getting invoked for GLK. Extending this fix to GLK as well.
>>>>>>
>>>>>> Tested by Du,Wenkai on GLK board.
>>>>>>
>>>>>> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
>>>>>> ---
>>>>>> drivers/gpu/drm/i915/intel_audio.c | 3 ++-
>>>>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
>>>>>> index 656f6c931341..73b1e0b96f88 100644
>>>>>> --- a/drivers/gpu/drm/i915/intel_audio.c
>>>>>> +++ b/drivers/gpu/drm/i915/intel_audio.c
>>>>>> @@ -729,7 +729,8 @@ static void i915_audio_component_codec_wake_override(struct device *kdev,
>>>>>> struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
>>>>>> u32 tmp;
>>>>>>
>>>>>> - if (!IS_GEN9_BC(dev_priv) && !IS_BROXTON(dev_priv))
>>>>>> + if (!IS_GEN9_BC(dev_priv) && !IS_BROXTON(dev_priv) &&
>>>>>> + !IS_GEMINILAKE(dev_priv))
>>>>> That could be written as
>>>>>
>>>>> if (!IS_GEN9_BC(dev_priv) && !IS_GEN9_LP(dev_priv))
>>>>>
>>>>> which in turn could just be written as
>>>>>
>>>>> if (!IS_GEN9(dev_priv))
>>>>>
>>>>> ...but since GLK has gen 10 display, so I'm wondering if the same issue
>>>>> will be present in gen 10 too, and whether this should just become
>>>>>
>>>>> if (INTEL_GEN(dev_priv) < 9)
>>>> +1. I opened here to exactly add same comment.
>>> I am checking with DINQ and without this patch for GLK it can enumerate
>>> HDA codec. Ofcourse after cdclk fix.
>> How about the other way around? i.e., does codec enumeration work this
>> patch but without the cdclk change?
> Nop. with DINQ we need to have cdclk change to make Codec detection
> work. With or without this patch.
Basically what you're saying is that this patch is not needed? Gaurav,
can you check with the CDCLK patch [1] if that fixes the issue for you?
BR,
Jani.
PS. The CDCLK patch is not enough to fix the issue completely (probe
without display outputs will still choose a low CDCLK) but that's work
in progress.
[1] http://patchwork.freedesktop.org/patch/msgid/1508968932-32208-1-git-send-email-abhay.kumar@intel.com
>
>>
>>
>>
>>>>> BR,
>>>>> Jani.
>>>>>
>>>>>
>>>>>
>>>>>> return;
>>>>>>
>>>>>> i915_audio_component_get_power(kdev);
>>>>> --
>>>>> Jani Nikula, Intel Open Source Technology Center
>>>>> _______________________________________________
>>>>> Intel-gfx mailing list
>>>>> Intel-gfx@lists.freedesktop.org
>>>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>>> _______________________________________________
>>>> Intel-gfx mailing list
>>>> Intel-gfx@lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx@lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-04-10 11:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-08 13:36 [PATCH] drm/i915/audio: Fix audio detection issue on GLK Gaurav K Singh
2018-04-08 13:45 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2018-04-08 14:00 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-04-09 14:07 ` [PATCH] " Jani Nikula
2018-04-09 19:10 ` Rodrigo Vivi
2018-04-09 19:18 ` Kumar, Abhay
2018-04-09 23:20 ` Dhinakaran Pandiyan
2018-04-09 23:13 ` Kumar, Abhay
2018-04-10 11:02 ` Jani Nikula [this message]
2018-04-11 19:27 ` Singh, Gaurav K
-- strict thread matches above, loose matches on Subject: below --
2018-04-17 7:18 Gaurav K Singh
2018-04-17 8:02 ` Jani Nikula
2018-04-17 18:00 ` Kumar, Abhay
2018-04-17 18:22 Gaurav K Singh
2018-04-17 18:28 ` Du,Wenkai
2018-04-18 6:04 ` Singh, Gaurav K
2018-04-18 8:07 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fu43iat6.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=abhay.kumar@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).