From: Jani Nikula <jani.nikula@linux.intel.com>
To: bradley.d.volkin@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 10/13] drm/i915: Enable PPGTT command parser checks
Date: Thu, 06 Mar 2014 15:17:59 +0200 [thread overview]
Message-ID: <87ha7b31q0.fsf@intel.com> (raw)
In-Reply-To: <1392747357-25703-11-git-send-email-bradley.d.volkin@intel.com>
On Tue, 18 Feb 2014, bradley.d.volkin@intel.com wrote:
> From: Brad Volkin <bradley.d.volkin@intel.com>
>
> Various commands that access memory have a bit to determine whether
> the graphics address specified in the command should use the GGTT or
> PPGTT for translation. These checks ensure that the bit indicates
> PPGTT translation.
>
> Most of these checks use the existing bit-checking infrastructure.
> The PIPE_CONTROL and MI_FLUSH_DW commands, however, are multi-function
> commands. The GGTT/PPGTT bit is only relevant for certain uses of the
> command. As such, this change also extends the bit-checking code to
> include a "condition" mask and offset. If the condition mask is non-zero
> then the parser only performs the bit check when the bits specified by
> the condition mask/offset are also non-zero.
>
> NOTE: At this point in the series PPGTT must be enabled for the parser
> to work correctly. If it's not enabled, userspace will not be setting
> the PPGTT bits the way the parser requires. VLV is the only platform
> where this is a problem, so at this point, we disable parsing for VLV.
>
> v2: whitespace and trailing commas fixes, rebased
>
> OTC-Tracker: AXIA-4631
> Change-Id: I3f4c76b6734f1956ec47e698230f97d0998ff92b
> Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
> ---
> drivers/gpu/drm/i915/i915_cmd_parser.c | 128 ++++++++++++++++++++++++++++++---
> drivers/gpu/drm/i915/i915_drv.h | 6 ++
> drivers/gpu/drm/i915/i915_reg.h | 6 ++
> 3 files changed, 129 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c
> index 0351df1..1528549 100644
> --- a/drivers/gpu/drm/i915/i915_cmd_parser.c
> +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c
> @@ -124,10 +124,20 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = {
> CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, R ),
> CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, W,
> .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> - CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W,
> - .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> - CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W,
> - .reg = { .offset = 1, .mask = 0x007FFFFC } ),
> + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W | B,
> + .reg = { .offset = 1, .mask = 0x007FFFFC },
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W | B,
> + .reg = { .offset = 1, .mask = 0x007FFFFC },
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ),
> };
>
> @@ -139,9 +149,31 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = {
> CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ),
> CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, R ),
> CMD( MI_URB_CLEAR, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3F, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, R ),
> - CMD( MI_CLFLUSH, SMI, !F, 0x3FF, S ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> + CMD( MI_CLFLUSH, SMI, !F, 0x3FF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> + CMD( MI_REPORT_PERF_COUNT, SMI, !F, 0x3F, B,
> + .bits = {{
> + .offset = 1,
> + .mask = MI_REPORT_PERF_COUNT_GGTT,
> + .expected = 0,
> + }}, ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ),
> CMD( PIPELINE_SELECT, S3D, F, 1, S ),
> CMD( MEDIA_VFE_STATE, S3D, !F, 0xFFFF, B,
> @@ -158,6 +190,13 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = {
> .offset = 1,
> .mask = (PIPE_CONTROL_MMIO_WRITE | PIPE_CONTROL_NOTIFY),
> .expected = 0,
> + },
> + {
> + .offset = 1,
> + .mask = PIPE_CONTROL_GLOBAL_GTT_IVB,
> + .expected = 0,
> + .condition_offset = 1,
> + .condition_mask = PIPE_CONTROL_POST_SYNC_OP_MASK,
> }}, ),
> };
>
> @@ -184,15 +223,32 @@ static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = {
>
> static const struct drm_i915_cmd_descriptor video_cmds[] = {
> CMD( MI_ARB_ON_OFF, SMI, F, 1, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0,
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK,
> + }}, ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> }}, ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> /*
> * MFX_WAIT doesn't fit the way we handle length for most commands.
> * It has a length field but it uses a non-standard length bias.
> @@ -203,26 +259,55 @@ static const struct drm_i915_cmd_descriptor video_cmds[] = {
>
> static const struct drm_i915_cmd_descriptor vecs_cmds[] = {
> CMD( MI_ARB_ON_OFF, SMI, F, 1, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0,
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK,
> + }}, ),
> + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> }}, ),
> - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ),
> };
>
> static const struct drm_i915_cmd_descriptor blt_cmds[] = {
> CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ),
> - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ),
> + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, B,
> + .bits = {{
> + .offset = 0,
> + .mask = MI_GLOBAL_GTT,
> + .expected = 0,
> + }}, ),
> CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ),
> CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B,
> .bits = {{
> .offset = 0,
> .mask = MI_FLUSH_DW_NOTIFY,
> .expected = 0,
> + },
> + {
> + .offset = 1,
> + .mask = MI_FLUSH_DW_USE_GTT,
> + .expected = 0,
> + .condition_offset = 0,
> + .condition_mask = MI_FLUSH_DW_OP_MASK,
> }}, ),
> CMD( COLOR_BLT, S2D, !F, 0x3F, S ),
> CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ),
> @@ -617,10 +702,21 @@ finish:
> */
> bool i915_needs_cmd_parser(struct intel_ring_buffer *ring)
> {
> + drm_i915_private_t *dev_priv =
> + (drm_i915_private_t *)ring->dev->dev_private;
Make that:
struct drm_i915_private *dev_priv = ring->dev->dev_private;
> +
> /* No command tables indicates a platform without parsing */
> if (!ring->cmd_tables)
> return false;
>
> + /*
> + * XXX: VLV is Gen7 and therefore has cmd_tables, but has PPGTT
> + * disabled. That will cause all of the parser's PPGTT checks to
> + * fail. For now, disable parsing when PPGTT is off.
> + */
> + if (!dev_priv->mm.aliasing_ppgtt)
> + return false;
> +
> return (i915.enable_cmd_parser == 1);
> }
>
> @@ -737,6 +833,16 @@ int i915_parse_cmds(struct intel_ring_buffer *ring,
> if (desc->bits[i].mask == 0)
> break;
>
> + if (desc->bits[i].condition_mask != 0) {
> + u32 offset =
> + desc->bits[i].condition_offset;
> + u32 condition = cmd[offset] &
> + desc->bits[i].condition_mask;
> +
> + if (condition == 0)
> + continue;
> + }
> +
> dword = cmd[desc->bits[i].offset] &
> desc->bits[i].mask;
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 376472f..27a48d9 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1868,11 +1868,17 @@ struct drm_i915_cmd_descriptor {
> * the expected value, the parser rejects it. Only valid if flags has
> * the CMD_DESC_BITMASK bit set. Only entries where mask is non-zero
> * are valid.
> + *
> + * If the check specifies a non-zero condition_mask then the parser
> + * only performs the check when the bits specified by condition_mask
> + * are non-zero.
> */
> struct {
> u32 offset;
> u32 mask;
> u32 expected;
> + u32 condition_offset;
> + u32 condition_mask;
> } bits[MAX_CMD_DESC_BITMASKS];
> };
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index e6dd7e9..e683b31 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -190,6 +190,8 @@
> * Memory interface instructions used by the kernel
> */
> #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
> +/* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */
> +#define MI_GLOBAL_GTT (1<<22)
>
> #define MI_NOOP MI_INSTR(0, 0)
> #define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
> @@ -269,6 +271,7 @@
> #define MI_FLUSH_DW_STORE_INDEX (1<<21)
> #define MI_INVALIDATE_TLB (1<<18)
> #define MI_FLUSH_DW_OP_STOREDW (1<<14)
> +#define MI_FLUSH_DW_OP_MASK (3<<14)
> #define MI_FLUSH_DW_NOTIFY (1<<8)
> #define MI_INVALIDATE_BSD (1<<7)
> #define MI_FLUSH_DW_USE_GTT (1<<2)
> @@ -335,6 +338,7 @@
> #define PIPE_CONTROL_CS_STALL (1<<20)
> #define PIPE_CONTROL_TLB_INVALIDATE (1<<18)
> #define PIPE_CONTROL_QW_WRITE (1<<14)
> +#define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14)
> #define PIPE_CONTROL_DEPTH_STALL (1<<13)
> #define PIPE_CONTROL_WRITE_FLUSH (1<<12)
> #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */
> @@ -363,6 +367,8 @@
> #define MI_URB_CLEAR MI_INSTR(0x19, 0)
> #define MI_UPDATE_GTT MI_INSTR(0x23, 0)
> #define MI_CLFLUSH MI_INSTR(0x27, 0)
> +#define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0)
> +#define MI_REPORT_PERF_COUNT_GGTT (1<<0)
> #define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0)
> #define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0)
> #define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0)
> --
> 1.8.3.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2014-03-06 13:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-18 18:15 [PATCH 00/13] Gen7 batch buffer command parser bradley.d.volkin
2014-02-18 18:15 ` [PATCH 01/13] drm/i915: Refactor shmem pread setup bradley.d.volkin
2014-03-06 12:13 ` Jani Nikula
2014-02-18 18:15 ` [PATCH 02/13] drm/i915: Implement command buffer parsing logic bradley.d.volkin
2014-03-06 13:10 ` Jani Nikula
2014-03-06 21:07 ` Daniel Vetter
2014-03-20 12:40 ` Jani Nikula
2014-02-18 18:15 ` [PATCH 03/13] drm/i915: Initial command parser table definitions bradley.d.volkin
2014-03-06 13:12 ` Jani Nikula
2014-02-18 18:15 ` [PATCH 04/13] drm/i915: Reject privileged commands bradley.d.volkin
2014-02-18 18:15 ` [PATCH 05/13] drm/i915: Allow some privileged commands from master bradley.d.volkin
2014-02-18 18:15 ` [PATCH 06/13] drm/i915: Add register whitelists for mesa bradley.d.volkin
2014-02-18 18:15 ` [PATCH 07/13] drm/i915: Add register whitelist for DRM master bradley.d.volkin
2014-02-18 18:15 ` [PATCH 08/13] drm/i915: Enable register whitelist checks bradley.d.volkin
2014-02-18 18:15 ` [PATCH 09/13] drm/i915: Reject commands that explicitly generate interrupts bradley.d.volkin
2014-02-18 18:15 ` [PATCH 10/13] drm/i915: Enable PPGTT command parser checks bradley.d.volkin
2014-03-06 13:17 ` Jani Nikula [this message]
2014-03-06 21:32 ` Volkin, Bradley D
2014-03-06 21:58 ` Daniel Vetter
2014-03-06 22:13 ` Volkin, Bradley D
2014-02-18 18:15 ` [PATCH 11/13] drm/i915: Reject commands that would store to global HWS page bradley.d.volkin
2014-02-18 18:15 ` [PATCH 12/13] drm/i915: Add a CMD_PARSER_VERSION getparam bradley.d.volkin
2014-02-18 18:15 ` [PATCH 13/13] drm/i915: Enable command parsing by default bradley.d.volkin
2014-03-04 17:21 ` [PATCH 00/13] Gen7 batch buffer command parser Volkin, Bradley D
2014-03-05 10:46 ` Daniel Vetter
2014-03-05 16:59 ` Volkin, Bradley D
2014-03-05 17:14 ` Daniel Vetter
2014-03-05 17:45 ` Volkin, Bradley D
2014-03-11 12:41 ` Jani Nikula
2014-03-12 18:02 ` Volkin, Bradley D
2014-03-20 14:43 ` Jani Nikula
2014-03-25 13:15 ` Daniel Vetter
2014-03-25 13:21 ` Jani Nikula
2014-03-25 19:46 ` Volkin, Bradley D
2014-03-25 19:53 ` Daniel Vetter
-- strict thread matches above, loose matches on Subject: below --
2013-11-26 16:51 [RFC 00/22] " bradley.d.volkin
2014-01-29 21:55 ` [PATCH 00/13] " bradley.d.volkin
2014-01-29 21:55 ` [PATCH 10/13] drm/i915: Enable PPGTT command parser checks bradley.d.volkin
2014-01-29 22:33 ` Chris Wilson
2014-01-29 23:00 ` Volkin, Bradley D
2014-01-29 23:08 ` Chris Wilson
2014-02-05 15:37 ` Jani Nikula
2014-02-05 18:54 ` Volkin, Bradley D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ha7b31q0.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=bradley.d.volkin@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox