public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Joseph Nuzman <jnuzman@gmail.com>
Subject: Re: [PATCH] drm/i915: always update ELD connector type after get modes
Date: Tue, 19 Sep 2017 18:49:12 +0300	[thread overview]
Message-ID: <87inge8z9j.fsf@nikula.org> (raw)
In-Reply-To: <20170919153813.29808-1-jani.nikula@intel.com>

On Tue, 19 Sep 2017, Jani Nikula <jani.nikula@intel.com> wrote:
> drm_edid_to_eld() initializes the connector ELD to zero, overwriting the
> ELD connector type initialized in intel_audio_codec_enable(). If
> userspace does getconnector and thus get_modes after modeset, a
> subsequent audio component i915_audio_component_get_eld() call will
> receive an ELD without the connector type properly set. It's fine for
> HDMI, but screws up audio for DP.
>
> Always set the ELD connector type at intel_connector_update_modes()
> based on the connector type. We can drop the connector type update from
> intel_audio_codec_enable().
>
> Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out.
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Joseph Nuzman <jnuzman@gmail.com>
> Reported-by: Joseph Nuzman <jnuzman@gmail.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Probably

Cc: stable@vger.kernel.org

about as far back as it applies?

>
> ---
>
> We'll still need to cache and fix the av sync delay as well, but we need
> adjusted mode for that.
> ---
>  drivers/gpu/drm/i915/intel_audio.c |  5 -----
>  drivers/gpu/drm/i915/intel_modes.c | 17 +++++++++++++++++
>  2 files changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> index d805b6e6fe71..27743be5b768 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -606,11 +606,6 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,
>  			 connector->encoder->base.id,
>  			 connector->encoder->name);
>  
> -	/* ELD Conn_Type */
> -	connector->eld[5] &= ~(3 << 2);
> -	if (intel_crtc_has_dp_encoder(crtc_state))
> -		connector->eld[5] |= (1 << 2);
> -
>  	connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
>  
>  	if (dev_priv->display.audio_codec_enable)
> diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
> index 951e834dd274..28a778b785ac 100644
> --- a/drivers/gpu/drm/i915/intel_modes.c
> +++ b/drivers/gpu/drm/i915/intel_modes.c
> @@ -30,6 +30,21 @@
>  #include "intel_drv.h"
>  #include "i915_drv.h"
>  
> +static void intel_connector_update_eld_conn_type(struct drm_connector *connector)
> +{
> +	u8 conn_type;
> +
> +	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> +	    connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
> +		conn_type = DRM_ELD_CONN_TYPE_DP;
> +	} else {
> +		conn_type = DRM_ELD_CONN_TYPE_HDMI;
> +	}
> +
> +	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] &= ~DRM_ELD_CONN_TYPE_MASK;
> +	connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= conn_type;
> +}
> +
>  /**
>   * intel_connector_update_modes - update connector from edid
>   * @connector: DRM connector device to use
> @@ -44,6 +59,8 @@ int intel_connector_update_modes(struct drm_connector *connector,
>  	ret = drm_add_edid_modes(connector, edid);
>  	drm_edid_to_eld(connector, edid);
>  
> +	intel_connector_update_eld_conn_type(connector);
> +
>  	return ret;
>  }

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-09-19 15:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-19 15:38 [PATCH] drm/i915: always update ELD connector type after get modes Jani Nikula
2017-09-19 15:49 ` Jani Nikula [this message]
2017-09-19 15:53 ` Ville Syrjälä
2017-09-19 19:41 ` ✗ Fi.CI.BAT: warning for " Patchwork
2017-09-20  8:07 ` ✗ Fi.CI.BAT: failure " Patchwork
2017-09-20  9:09 ` ✓ Fi.CI.BAT: success " Patchwork
2017-09-20 10:11 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87inge8z9j.fsf@nikula.org \
    --to=jani.nikula@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jnuzman@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox