From: Jani Nikula <jani.nikula@linux.intel.com>
To: Lukas Wunner <lukas@wunner.de>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915: Add missing MacBook Pro models with dual channel LVDS
Date: Wed, 29 Apr 2015 17:21:22 +0300 [thread overview]
Message-ID: <87iocfnhgd.fsf@intel.com> (raw)
In-Reply-To: <20150416071459.DB68B6E96B@gabe.freedesktop.org>
On Sun, 12 Apr 2015, Lukas Wunner <lukas@wunner.de> wrote:
> Single channel LVDS maxes out at 112 MHz. All 17" models with i915
> graphics had a resolution of 1920x1200 (193 MHz), necessitating dual
> channel LVDS. The 15" pre-retina models had either 1440x900 (106 MHz)
> or 1680x1050 (119 MHz), both versions used dual channel LVDS even
> though the smaller one would have fit into a single channel.
>
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
> Tested-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/intel_lvds.c | 26 ++++++++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 071b96d..417ccab 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -812,12 +812,28 @@ static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
> static const struct dmi_system_id intel_dual_link_lvds[] = {
> {
> .callback = intel_dual_link_lvds_callback,
> - .ident = "Apple MacBook Pro (Core i5/i7 Series)",
> + .ident = "Apple MacBook Pro 15\" (2010)",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"),
> + },
> + },
> + {
> + .callback = intel_dual_link_lvds_callback,
> + .ident = "Apple MacBook Pro 15\" (2011)",
> .matches = {
> DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
> },
> },
> + {
> + .callback = intel_dual_link_lvds_callback,
> + .ident = "Apple MacBook Pro 15\" (2012)",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"),
> + },
> + },
> { } /* terminating entry */
> };
>
> @@ -847,6 +863,11 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
> if (i915.lvds_channel_mode > 0)
> return i915.lvds_channel_mode == 2;
>
> + /* single channel LVDS is limited to 112 kHz */
> + if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock
> + > 112999)
> + return true;
> +
> if (dmi_check_system(intel_dual_link_lvds))
> return true;
>
> @@ -1104,6 +1125,8 @@ void intel_lvds_init(struct drm_device *dev)
> out:
> mutex_unlock(&dev->mode_config.mutex);
>
> + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
> +
> lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
> DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
> lvds_encoder->is_dual_link ? "dual" : "single");
> @@ -1118,7 +1141,6 @@ out:
> }
> drm_connector_register(connector);
>
> - intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
> intel_panel_setup_backlight(connector, INVALID_PIPE);
>
> return;
> --
> 1.8.5.2 (Apple Git-48)
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-29 14:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-12 19:10 [PATCH] drm/i915: Add missing MacBook Pro models with dual channel LVDS Lukas Wunner
2015-04-29 14:21 ` Jani Nikula [this message]
2015-04-30 9:42 ` Joonas Lahtinen
2015-04-30 13:28 ` [PATCH v3] " Lukas Wunner
2015-04-30 14:15 ` Ville Syrjälä
2015-05-04 14:52 ` Lukas Wunner
2015-05-05 11:26 ` Jani Nikula
-- strict thread matches above, loose matches on Subject: below --
2015-04-12 19:10 [PATCH] " Lukas Wunner
2015-04-13 13:36 ` Jani Nikula
2015-04-14 20:19 ` Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87iocfnhgd.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lukas@wunner.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox