* [i915] invert_brightness on 8086:0116:103c:1854 [not found] <31941380503904@web12m.yandex.ru> @ 2013-10-05 4:06 ` Kirill Tkhai 2013-10-07 7:44 ` Jani Nikula 0 siblings, 1 reply; 5+ messages in thread From: Kirill Tkhai @ 2013-10-05 4:06 UTC (permalink / raw) To: intel-gfx; +Cc: daniel.vetter Hi, I've just installed kernel 3.10 on HP 250 G1 and the found option invert_brightness is required. IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice) lspci is: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 1854 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 41b1 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Regards, Kirill _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854 2013-10-05 4:06 ` [i915] invert_brightness on 8086:0116:103c:1854 Kirill Tkhai @ 2013-10-07 7:44 ` Jani Nikula 2013-10-07 12:14 ` Kirill Tkhai 0 siblings, 1 reply; 5+ messages in thread From: Jani Nikula @ 2013-10-07 7:44 UTC (permalink / raw) To: Kirill Tkhai, intel-gfx; +Cc: daniel.vetter On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote: > Hi, > > I've just installed kernel 3.10 on HP 250 G1 and the found option > invert_brightness is required. Hi Kirill, thanks for the report. I suspect invert_brightness is not the right fix, since we've only ever seen that on gen4 Acer based laptops. Please file a bug on DRM/Intel at [1]. BR, Jani. [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI > > IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice) > > lspci is: > 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) > Subsystem: Hewlett-Packard Company Device 1854 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 42 > Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at 4000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0f00c Data: 41b1 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a4] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: i915 > > Regards, > Kirill > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854 2013-10-07 7:44 ` Jani Nikula @ 2013-10-07 12:14 ` Kirill Tkhai 2013-10-07 13:43 ` Kirill Tkhai 0 siblings, 1 reply; 5+ messages in thread From: Kirill Tkhai @ 2013-10-07 12:14 UTC (permalink / raw) To: Jani Nikula, intel-gfx@lists.freedesktop.org; +Cc: daniel.vetter@ffwll.ch 07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>: > On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote: > >> Hi, >> >> I've just installed kernel 3.10 on HP 250 G1 and the found option >> invert_brightness is required. > > Hi Kirill, thanks for the report. I suspect invert_brightness is not the > right fix, since we've only ever seen that on gen4 Acer based > laptops. Please file a bug on DRM/Intel at [1]. One more detail before I post a BUG. My screen is black in *console* right after kernel is started unless the option is passed. DRI is about XServer as I understand right. Do we mean the same? > > BR, > Jani. > > [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI > >> IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice) >> >> lspci is: >> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) >> Subsystem: Hewlett-Packard Company Device 1854 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 42 >> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M] >> Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] >> Region 4: I/O ports at 4000 [size=64] >> Expansion ROM at <unassigned> [disabled] >> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- >> Address: fee0f00c Data: 41b1 >> Capabilities: [d0] Power Management version 2 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [a4] PCI Advanced Features >> AFCap: TP+ FLR+ >> AFCtrl: FLR- >> AFStatus: TP- >> Kernel driver in use: i915 >> >> Regards, >> Kirill >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854 2013-10-07 12:14 ` Kirill Tkhai @ 2013-10-07 13:43 ` Kirill Tkhai 2013-10-07 14:45 ` Daniel Vetter 0 siblings, 1 reply; 5+ messages in thread From: Kirill Tkhai @ 2013-10-07 13:43 UTC (permalink / raw) To: Jani Nikula, intel-gfx@lists.freedesktop.org; +Cc: daniel.vetter@ffwll.ch 07.10.2013, 16:14, "Kirill Tkhai" <tkhai@yandex.ru>: > 07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>: > >> On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote: >>> Hi, >>> >>> I've just installed kernel 3.10 on HP 250 G1 and the found option >>> invert_brightness is required. >> Hi Kirill, thanks for the report. I suspect invert_brightness is not the >> right fix, since we've only ever seen that on gen4 Acer based >> laptops. Please file a bug on DRM/Intel at [1]. > > One more detail before I post a BUG. > > My screen is black in *console* right after kernel is started unless > the option is passed. > > DRI is about XServer as I understand right. Do we mean the same? *if* I understand right :) >> BR, >> Jani. >> >> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI >>> IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice) >>> >>> lspci is: >>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) >>> Subsystem: Hewlett-Packard Company Device 1854 >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 42 >>> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M] >>> Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] >>> Region 4: I/O ports at 4000 [size=64] >>> Expansion ROM at <unassigned> [disabled] >>> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- >>> Address: fee0f00c Data: 41b1 >>> Capabilities: [d0] Power Management version 2 >>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) >>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >>> Capabilities: [a4] PCI Advanced Features >>> AFCap: TP+ FLR+ >>> AFCtrl: FLR- >>> AFStatus: TP- >>> Kernel driver in use: i915 >>> >>> Regards, >>> Kirill >>> _______________________________________________ >>> Intel-gfx mailing list >>> Intel-gfx@lists.freedesktop.org >>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx >> -- >> Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854 2013-10-07 13:43 ` Kirill Tkhai @ 2013-10-07 14:45 ` Daniel Vetter 0 siblings, 0 replies; 5+ messages in thread From: Daniel Vetter @ 2013-10-07 14:45 UTC (permalink / raw) To: Kirill Tkhai; +Cc: daniel.vetter@ffwll.ch, intel-gfx@lists.freedesktop.org On Mon, Oct 07, 2013 at 05:43:11PM +0400, Kirill Tkhai wrote: > > > 07.10.2013, 16:14, "Kirill Tkhai" <tkhai@yandex.ru>: > > 07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>: > > > >> On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote: > >>> Hi, > >>> > >>> I've just installed kernel 3.10 on HP 250 G1 and the found option > >>> invert_brightness is required. > >> Hi Kirill, thanks for the report. I suspect invert_brightness is not the > >> right fix, since we've only ever seen that on gen4 Acer based > >> laptops. Please file a bug on DRM/Intel at [1]. > > > > One more detail before I post a BUG. > > > > My screen is black in *console* right after kernel is started unless > > the option is passed. > > > > DRI is about XServer as I understand right. Do we mean the same? > > *if* I understand right :) DRI is X server, but DR_M_ is the kernel part. Yeah, the linux gfx stack is a rather complex beast ... -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-10-07 14:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <31941380503904@web12m.yandex.ru>
2013-10-05 4:06 ` [i915] invert_brightness on 8086:0116:103c:1854 Kirill Tkhai
2013-10-07 7:44 ` Jani Nikula
2013-10-07 12:14 ` Kirill Tkhai
2013-10-07 13:43 ` Kirill Tkhai
2013-10-07 14:45 ` Daniel Vetter
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox