From: Jani Nikula <jani.nikula@linux.intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: Re: [PATCH 2/9] drm/i915: Clean up skl+ plane stride limits
Date: Tue, 07 May 2024 12:02:49 +0300 [thread overview]
Message-ID: <87jzk6kn9i.fsf@intel.com> (raw)
In-Reply-To: <ZjkHaZOdijUrHrci@intel.com>
On Mon, 06 May 2024, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Mon, May 06, 2024 at 05:03:59PM +0300, Jani Nikula wrote:
>> On Mon, 06 May 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
>> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> >
>> > skl_plane_max_stride() is pretty messy. Streamline it and
>> > split it into clear skl+ vs. adl+ variants.
>> >
>> > TODO: Deal with icl and tgl strude limits properly
>> >
>> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> > ---
>> > .../drm/i915/display/skl_universal_plane.c | 65 +++++++++++--------
>> > 1 file changed, 37 insertions(+), 28 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
>> > index 0a8e781a3648..b8103d6ebc1f 100644
>> > --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
>> > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
>> > @@ -461,41 +461,46 @@ static int icl_plane_max_height(const struct drm_framebuffer *fb,
>> > }
>> >
>> > static unsigned int
>> > -skl_plane_max_stride(struct intel_plane *plane,
>> > - u32 pixel_format, u64 modifier,
>> > - unsigned int rotation)
>> > +plane_max_stride(struct intel_plane *plane,
>> > + u32 pixel_format, u64 modifier,
>> > + unsigned int rotation,
>> > + unsigned int max_pixels,
>> > + unsigned int max_bytes)
>> > {
>> > - struct drm_i915_private *i915 = to_i915(plane->base.dev);
>> > const struct drm_format_info *info = drm_format_info(pixel_format);
>> > int cpp = info->cpp[0];
>> > - int max_horizontal_pixels = 8192;
>> > - int max_stride_bytes;
>> > -
>> > - if (DISPLAY_VER(i915) >= 13) {
>> > - /*
>> > - * The stride in bytes must not exceed of the size
>> > - * of 128K bytes. For pixel formats of 64bpp will allow
>> > - * for a 16K pixel surface.
>> > - */
>> > - max_stride_bytes = 131072;
>> > - if (cpp == 8)
>> > - max_horizontal_pixels = 16384;
>>
>> The commit message doesn't mention anything about this being dropped.
>
> 16k pixels * 8 cpp == 128k bytes, so it's completely redundant.
Right. The old one was just so hard to read. :/
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
>
>>
>> BR,
>> Jani.
>>
>> > - else
>> > - max_horizontal_pixels = 65536;
>> > - } else {
>> > - /*
>> > - * "The stride in bytes must not exceed the
>> > - * of the size of 8K pixels and 32K bytes."
>> > - */
>> > - max_stride_bytes = 32768;
>> > - }
>> >
>> > if (drm_rotation_90_or_270(rotation))
>> > - return min(max_horizontal_pixels, max_stride_bytes / cpp);
>> > + return min(max_pixels, max_bytes / cpp);
>> > else
>> > - return min(max_horizontal_pixels * cpp, max_stride_bytes);
>> > + return min(max_pixels * cpp, max_bytes);
>> > }
>> >
>> > +static unsigned int
>> > +adl_plane_max_stride(struct intel_plane *plane,
>> > + u32 pixel_format, u64 modifier,
>> > + unsigned int rotation)
>> > +{
>> > + unsigned int max_pixels = 65536; /* PLANE_OFFSET limit */
>> > + unsigned int max_bytes = 128 * 1024;
>> > +
>> > + return plane_max_stride(plane, pixel_format,
>> > + modifier, rotation,
>> > + max_pixels, max_bytes);
>> > +}
>> > +
>> > +static unsigned int
>> > +skl_plane_max_stride(struct intel_plane *plane,
>> > + u32 pixel_format, u64 modifier,
>> > + unsigned int rotation)
>> > +{
>> > + unsigned int max_pixels = 8192; /* PLANE_OFFSET limit */
>> > + unsigned int max_bytes = 32 * 1024;
>> > +
>> > + return plane_max_stride(plane, pixel_format,
>> > + modifier, rotation,
>> > + max_pixels, max_bytes);
>> > +}
>> >
>> > /* Preoffset values for YUV to RGB Conversion */
>> > #define PREOFF_YUV_TO_RGB_HI 0x1800
>> > @@ -2357,7 +2362,11 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv,
>> > plane->min_cdclk = skl_plane_min_cdclk;
>> > }
>> >
>> > - plane->max_stride = skl_plane_max_stride;
>> > + if (DISPLAY_VER(dev_priv) >= 13)
>> > + plane->max_stride = adl_plane_max_stride;
>> > + else
>> > + plane->max_stride = skl_plane_max_stride;
>> > +
>> > if (DISPLAY_VER(dev_priv) >= 11) {
>> > plane->update_noarm = icl_plane_update_noarm;
>> > plane->update_arm = icl_plane_update_arm;
>>
>> --
>> Jani Nikula, Intel
--
Jani Nikula, Intel
next prev parent reply other threads:[~2024-05-07 9:03 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 12:57 [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjala
2024-05-06 12:57 ` [PATCH 1/9] drm/i915: Split gen2 vs. gen3 .max_stride() Ville Syrjala
2024-05-06 13:57 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 2/9] drm/i915: Clean up skl+ plane stride limits Ville Syrjala
2024-05-06 14:03 ` Jani Nikula
2024-05-06 16:38 ` Ville Syrjälä
2024-05-07 9:02 ` Jani Nikula [this message]
2024-05-06 12:57 ` [PATCH 3/9] drm/i915: Drop 'uses_fence' parameter from intel_pin_fb_obj_dpt() Ville Syrjala
2024-05-06 14:04 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 4/9] drm/i915: Extract intel_plane_needs_physical() Ville Syrjala
2024-05-06 14:05 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 5/9] drm/i915: Polish types in fb calculations Ville Syrjala
2024-05-06 14:07 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 6/9] drm/i915: Constify 'fb' in during pinning Ville Syrjala
2024-05-06 14:11 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 7/9] drm/i915: Change intel_fbdev_fb_alloc() reuturn type Ville Syrjala
2024-05-06 14:16 ` Jani Nikula
2024-05-06 16:51 ` Ville Syrjälä
2024-05-06 18:19 ` Ville Syrjälä
2024-05-10 10:22 ` [PATCH v2 7/9] drm/i915: Change intel_fbdev_fb_alloc() return type Ville Syrjala
2024-05-10 11:30 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 8/9] drm/i915: Cleanup fbdev fb setup Ville Syrjala
2024-05-10 10:22 ` [PATCH v2 " Ville Syrjala
2024-05-10 11:32 ` Jani Nikula
2024-05-06 12:57 ` [PATCH 9/9] drm/i915: Rename the fb pinning functions to indicate the address space Ville Syrjala
2024-05-10 11:35 ` Jani Nikula
2024-05-06 13:34 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Plane fb refactoring Patchwork
2024-05-06 13:42 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-06 18:13 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-05-10 12:37 ` ✓ Fi.CI.BAT: success for drm/i915: Plane fb refactoring (rev3) Patchwork
2024-05-10 16:55 ` [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjälä
2024-05-11 19:00 ` Lucas De Marchi
2024-05-11 4:12 ` ✗ Fi.CI.IGT: failure for drm/i915: Plane fb refactoring (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87jzk6kn9i.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).