From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 7/9] drm/i915: Split intel_disable_ddi() into DP vs. HDMI variants
Date: Wed, 11 Oct 2017 23:03:18 +0300 [thread overview]
Message-ID: <87k201o3jt.fsf@intel.com> (raw)
In-Reply-To: <20171010121207.570-8-ville.syrjala@linux.intel.com>
On Tue, 10 Oct 2017, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Untangle intel_disable_ddi() by splitting it into DP and HDMI specific
> variants.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 51 ++++++++++++++++++++++++----------------
> 1 file changed, 31 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 945980e71697..c930ef0338c5 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2424,29 +2424,40 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder,
> intel_audio_codec_enable(intel_encoder, pipe_config, conn_state);
> }
>
> -static void intel_disable_ddi(struct intel_encoder *intel_encoder,
> +static void intel_disable_ddi_dp(struct intel_encoder *encoder,
> + const struct intel_crtc_state *old_crtc_state,
> + const struct drm_connector_state *old_conn_state)
> +{
> + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> +
> + if (old_crtc_state->has_audio)
> + intel_audio_codec_disable(encoder);
> +
You remove the eDP check here, and...
> + intel_edp_drrs_disable(intel_dp, old_crtc_state);
...this will now depend on old_crtc_state->has_drrs which is probably
fine, but...
> + intel_psr_disable(intel_dp, old_crtc_state);
...but this will be wrong. I don't mind adding the edp check within.
> + intel_edp_backlight_off(old_conn_state);
This is ok.
I guess easiest would be to keep the type == INTEL_OUTPUT_EDP check and
clean up afterwards.
Otherwise LGTM.
BR,
Jani.
> +}
> +
> +static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
> + const struct intel_crtc_state *old_crtc_state,
> + const struct drm_connector_state *old_conn_state)
> +{
> + if (old_crtc_state->has_audio)
> + intel_audio_codec_disable(encoder);
> +
> + intel_hdmi_handle_sink_scrambling(encoder,
> + old_conn_state->connector,
> + false, false);
> +}
> +
> +static void intel_disable_ddi(struct intel_encoder *encoder,
> const struct intel_crtc_state *old_crtc_state,
> const struct drm_connector_state *old_conn_state)
> {
> - struct drm_encoder *encoder = &intel_encoder->base;
> - int type = intel_encoder->type;
> -
> - if (old_crtc_state->has_audio)
> - intel_audio_codec_disable(intel_encoder);
> -
> - if (type == INTEL_OUTPUT_HDMI) {
> - intel_hdmi_handle_sink_scrambling(intel_encoder,
> - old_conn_state->connector,
> - false, false);
> - }
> -
> - if (type == INTEL_OUTPUT_EDP) {
> - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> -
> - intel_edp_drrs_disable(intel_dp, old_crtc_state);
> - intel_psr_disable(intel_dp, old_crtc_state);
> - intel_edp_backlight_off(old_conn_state);
> - }
> + if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
> + intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
> + else
> + intel_disable_ddi_dp(encoder, old_crtc_state, old_conn_state);
> }
>
> static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-10-11 20:03 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 12:11 [PATCH v2 0/9] drm/i915: Cleaner DDI DP vs. HDMI split Ville Syrjala
2017-10-10 12:11 ` [PATCH v2 1/9] drm/i915: Dump 'output_types' in crtc state dump Ville Syrjala
2017-10-11 19:50 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 2/9] drm/i915: Extract intel_ddi_clk_disable() Ville Syrjala
2017-10-11 19:52 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 3/9] drm/i915: Extract intel_disable_ddi_buf() Ville Syrjala
2017-10-11 19:53 ` Jani Nikula
2017-10-10 12:12 ` [PATCH 4/9] drm/i915: Inline the required bits of intel_ddi_post_disable() into intel_ddi_fdi_post_disable() Ville Syrjala
2017-10-10 12:12 ` [PATCH v2 5/9] drm/i915: Split intel_ddi_post_disable() into DP vs. HDMI variants Ville Syrjala
2017-10-10 12:12 ` [PATCH 6/9] drm/i915: Remove useless eDP check from intel_ddi_pre_enable_dp() Ville Syrjala
2017-10-10 12:12 ` [PATCH 7/9] drm/i915: Split intel_disable_ddi() into DP vs. HDMI variants Ville Syrjala
2017-10-11 20:03 ` Jani Nikula [this message]
2017-10-12 9:49 ` Ville Syrjälä
2017-10-13 14:13 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 8/9] drm/i915: Plumb crtc_state etc. directly to intel_ddi_pre_enable_{dp, hdmi}() Ville Syrjala
2017-10-13 14:25 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 9/9] drm/i915: Split intel_enable_ddi() into DP and HDMI variants Ville Syrjala
2017-10-11 20:06 ` Jani Nikula
2017-10-13 14:20 ` Jani Nikula
2017-10-13 18:10 ` Ville Syrjälä
2017-10-10 13:07 ` ✗ Fi.CI.BAT: warning for drm/i915: Cleaner DDI DP vs. HDMI split Patchwork
2017-10-10 13:21 ` Ville Syrjälä
2017-10-13 17:03 ` ✓ Fi.CI.BAT: success " Patchwork
2017-10-13 18:16 ` Ville Syrjälä
2017-10-13 18:49 ` Jani Nikula
2017-10-14 0:10 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k201o3jt.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).