From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: Hans de Goede <hdegoede@redhat.com>
Subject: Re: [PATCH v2 2/3] drm/i915: Determine DSI panel orientation from VBT
Date: Mon, 22 Oct 2018 17:52:45 +0300 [thread overview]
Message-ID: <87lg6qdoea.fsf@intel.com> (raw)
In-Reply-To: <20181022142015.4026-1-ville.syrjala@linux.intel.com>
On Mon, 22 Oct 2018, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> VBT appears to have two (or possibly three) ways to indicate the panel
> rotation. The first is in the MIPI config block, but that apparenly
> usually (maybe always?) indicates 0 degrees despite the actual panel
> orientation. The second way to indicate this is in the general features
> block, which can just indicate whether 180 degress rotation is used.
> The third might be a separate rotation data block, but that is not
> at all documented so who knows what it may contain.
>
> Let's try the first two. We first try the DSI specicic VBT
> information, and it it doesn't look trustworthy (ie. indicates
> 0 degrees) we fall back to the 180 degree thing. Just to avoid too
> many changes in one go we shall also keep the hardware readout path
> for now.
>
> If this works for more than just my VLV FFRD the question becomes
> how many of the panel orientation quirks are now redundant?
>
> v2: Move the code into intel_dsi.c (Jani)
>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
v2 too
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 ++
> drivers/gpu/drm/i915/intel_bios.c | 31 +++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_dsi.c | 17 +++++++++++++++++
> drivers/gpu/drm/i915/intel_dsi.h | 2 ++
> drivers/gpu/drm/i915/vlv_dsi.c | 2 +-
> 5 files changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 3017ef037fed..115d5963e5a6 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1102,6 +1102,7 @@ struct intel_vbt_data {
> unsigned int panel_type:4;
> int lvds_ssc_freq;
> unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
> + enum drm_panel_orientation orientation;
>
> enum drrs_support_type drrs_type;
>
> @@ -1147,6 +1148,7 @@ struct intel_vbt_data {
> u8 *data;
> const u8 *sequence[MIPI_SEQ_MAX];
> u8 *deassert_seq; /* Used by fixup_mipi_sequences() */
> + enum drm_panel_orientation orientation;
> } dsi;
>
> int crt_ddc_pin;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 1faa494e2bc9..a4bfd92212df 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -420,6 +420,13 @@ parse_general_features(struct drm_i915_private *dev_priv,
> intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
> dev_priv->vbt.display_clock_mode = general->display_clock_mode;
> dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
> + if (bdb->version >= 181) {
> + dev_priv->vbt.orientation = general->rotate_180 ?
> + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP :
> + DRM_MODE_PANEL_ORIENTATION_NORMAL;
> + } else {
> + dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> + }
> DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
> dev_priv->vbt.int_tv_support,
> dev_priv->vbt.int_crt_support,
> @@ -852,6 +859,30 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
>
> parse_dsi_backlight_ports(dev_priv, bdb->version, port);
>
> + /* FIXME is the 90 vs. 270 correct? */
> + switch (config->rotation) {
> + case ENABLE_ROTATION_0:
> + /*
> + * Most (all?) VBTs claim 0 degrees despite having
> + * an upside down panel, thus we do not trust this.
> + */
> + dev_priv->vbt.dsi.orientation =
> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> + break;
> + case ENABLE_ROTATION_90:
> + dev_priv->vbt.dsi.orientation =
> + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
> + break;
> + case ENABLE_ROTATION_180:
> + dev_priv->vbt.dsi.orientation =
> + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> + break;
> + case ENABLE_ROTATION_270:
> + dev_priv->vbt.dsi.orientation =
> + DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
> + break;
> + }
> +
> /* We have mandatory mipi config blocks. Initialize as generic panel */
> dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
> }
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index a32cc1f4b384..ccbbebf118c1 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -28,3 +28,20 @@ int intel_dsi_tlpx_ns(const struct intel_dsi *intel_dsi)
> return 200;
> }
> }
> +
> +enum drm_panel_orientation
> +intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +{
> + struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> + enum drm_panel_orientation orientation;
> +
> + orientation = dev_priv->vbt.dsi.orientation;
> + if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + return orientation;
> +
> + orientation = dev_priv->vbt.orientation;
> + if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + return orientation;
> +
> + return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +}
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 14567929de9a..3f1bf884ff74 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -148,6 +148,8 @@ static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
> /* intel_dsi.c */
> int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
> int intel_dsi_tlpx_ns(const struct intel_dsi *intel_dsi);
> +enum drm_panel_orientation
> +intel_dsi_get_panel_orientation(struct intel_connector *connector);
>
> /* vlv_dsi.c */
> void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port);
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index dcc59f653e5b..99aa7abd15a8 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -1695,7 +1695,7 @@ vlv_dsi_get_panel_orientation(struct intel_connector *connector)
> return orientation;
> }
>
> - return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> + return intel_dsi_get_panel_orientation(connector);
> }
>
> static void intel_dsi_add_properties(struct intel_connector *connector)
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-22 14:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 19:59 [PATCH 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout Ville Syrjala
2018-10-19 19:59 ` [PATCH 2/3] drm/i915: Determine DSI panel orientation from VBT Ville Syrjala
2018-10-22 13:07 ` Jani Nikula
2018-10-22 13:25 ` Ville Syrjälä
2018-10-22 14:20 ` [PATCH v2 " Ville Syrjala
2018-10-22 14:52 ` Jani Nikula [this message]
2018-10-19 19:59 ` [PATCH 3/3] drm/i915: Remove the hardware readout path for DSI panel orientation Ville Syrjala
2018-10-19 20:11 ` Chris Wilson
2018-10-19 20:12 ` Chris Wilson
2018-10-22 13:09 ` Jani Nikula
2018-10-22 14:02 ` Hans de Goede
2018-10-22 14:20 ` [PATCH v2 " Ville Syrjala
2018-10-22 12:51 ` [PATCH 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout Jani Nikula
2018-10-22 13:13 ` Ville Syrjälä
2018-10-22 14:19 ` [PATCH v2 " Ville Syrjala
2018-10-22 19:41 ` Hans de Goede
2018-11-13 16:00 ` Ville Syrjälä
2018-10-22 16:26 ` ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout (rev4) Patchwork
2018-10-22 16:49 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-22 19:53 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lg6qdoea.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).