public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: Re: [PATCH] drm/i915: Shut up GuC errors when it's disabled
Date: Fri, 23 Oct 2015 13:56:40 +0300	[thread overview]
Message-ID: <87mvv9yhsn.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <1445591459-4327-1-git-send-email-daniel.vetter@ffwll.ch>

Daniel Vetter <daniel.vetter@ffwll.ch> writes:

> DRM_ERROR an continue without any issues aren't allowed since that
> causes noise in the CI system. But we absolutely want to have the
> DRM_ERROR when we want to run with GuC.
>
> For simplicity just short-circuit all the loader code when it's not
> needed.
>
> v2: Mika&Chris complained that I shouldn't hit send on patches written
> before coffee kicks in.
>
> v3: Make it compile at least ...
>
> Cc: Alex Dai <yu.dai@intel.com>
> Cc: Dave Gordon <david.s.gordon@intel.com>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

I did test only the case where we have guc disabled,
and the patch does what it advertizes.

Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

> ---
>  drivers/gpu/drm/i915/i915_gem.c         | 15 +++------------
>  drivers/gpu/drm/i915/intel_guc_loader.c |  6 ++++++
>  2 files changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index c067706ce53c..9552647a925d 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -4752,18 +4752,9 @@ i915_gem_init_hw(struct drm_device *dev)
>  	if (HAS_GUC_UCODE(dev)) {
>  		ret = intel_guc_ucode_load(dev);
>  		if (ret) {
> -			/*
> -			 * If we got an error and GuC submission is enabled, map
> -			 * the error to -EIO so the GPU will be declared wedged.
> -			 * OTOH, if we didn't intend to use the GuC anyway, just
> -			 * discard the error and carry on.
> -			 */
> -			DRM_ERROR("Failed to initialize GuC, error %d%s\n", ret,
> -				  i915.enable_guc_submission ? "" :
> -				  " (ignored)");
> -			ret = i915.enable_guc_submission ? -EIO : 0;
> -			if (ret)
> -				goto out;
> +			DRM_ERROR("Failed to initialize GuC, error %d\n", ret);
> +			ret = -EIO;
> +			goto out;
>  		}
>  	}
>  
> diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
> index c0281df52702..bbbf9b3b00eb 100644
> --- a/drivers/gpu/drm/i915/intel_guc_loader.c
> +++ b/drivers/gpu/drm/i915/intel_guc_loader.c
> @@ -364,6 +364,9 @@ int intel_guc_ucode_load(struct drm_device *dev)
>  	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
>  	int err = 0;
>  
> +	if (!i915.enable_guc_submission)
> +		return 0;
> +
>  	DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
>  		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
>  		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
> @@ -589,6 +592,9 @@ void intel_guc_ucode_init(struct drm_device *dev)
>  		fw_path = "";	/* unknown device */
>  	}
>  
> +	if (!i915.enable_guc_submission)
> +		return;
> +
>  	guc_fw->guc_dev = dev;
>  	guc_fw->guc_fw_path = fw_path;
>  	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
> -- 
> 2.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-10-23 10:57 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23  8:56 [PATCH 1/2] drm/i915: Shut up GuC errors when it's disabled Daniel Vetter
2015-10-23  8:56 ` [PATCH 2/2] drm/i915: shut up gen8+ SDE irq dmesg noise Daniel Vetter
2015-10-23  9:03   ` Chris Wilson
2015-10-23  9:14     ` Daniel Vetter
2015-10-23 14:21       ` Dave Gordon
2015-10-23  9:21     ` Jani Nikula
2015-10-23  9:23       ` Daniel Vetter
2015-10-23 13:33         ` Ville Syrjälä
2015-10-23 13:40           ` Chris Wilson
2015-10-23 13:47             ` Ville Syrjälä
2015-10-23 14:42           ` Daniel Vetter
2015-10-23 15:22             ` Ville Syrjälä
2015-10-27  2:31               ` Daniel Vetter
2015-10-27  8:10                 ` Jani Nikula
2015-10-28  0:22                   ` Daniel Vetter
2015-10-23  9:00 ` [PATCH] drm/i915: Don't complain about lack of ACPI video bios Daniel Vetter
2015-10-23 11:46   ` Jani Nikula
2015-10-23  9:10 ` [PATCH] drm/i915: Shut up GuC errors when it's disabled Daniel Vetter
2015-10-23 10:56   ` Mika Kuoppala [this message]
2015-10-23 11:32     ` Daniel Vetter
2015-10-23  9:21 ` [PATCH 1/2] " kbuild test robot
  -- strict thread matches above, loose matches on Subject: below --
2015-10-23  8:33 [PATCH] " Daniel Vetter
2015-10-23  8:48 ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87mvv9yhsn.fsf@gaia.fi.intel.com \
    --to=mika.kuoppala@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox