Re: [PATCH v2] drm/dp: DPCD register defines for link status within ESI field

[Jani Nikula <jani.nikula@intel.com>]

On Wed, 13 Sep 2017, Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> wrote:
> Link status is available in the ESI field on devices with DPCD r1.2 or
> higher. DP spec also says "An MST upstream device shall use this field
> instead of the Link/Sink Device Status field registers, starting from DPCD
> Address 00200h."
>
> v2: Prefixed DP_ (Jani)
>     Rewrote commment to stay within 80 cols.
> Cc: Jani Nikula <jani.nikula@intel.com>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

Thanks, pushed to drm-misc-next.

BR,
Jani.

> ---
>  include/drm/drm_dp_helper.h | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 2c412a15cfa1..11c39f15f1b3 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -738,6 +738,11 @@
>  #define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
>  # define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
>  
> +#define DP_LANE0_1_STATUS_ESI                  0x200c /* status same as 0x202 */
> +#define DP_LANE2_3_STATUS_ESI                  0x200d /* status same as 0x203 */
> +#define DP_LANE_ALIGN_STATUS_UPDATED_ESI       0x200e /* status same as 0x204 */
> +#define DP_SINK_STATUS_ESI                     0x200f /* status same as 0x205 */
> +
>  #define DP_DPRX_FEATURE_ENUMERATION_LIST    0x2210  /* DP 1.3 */
>  # define DP_GTC_CAP					(1 << 0)  /* DP 1.3 */
>  # define DP_SST_SPLIT_SDP_CAP				(1 << 1)  /* DP 1.4 */

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx