From: Jani Nikula <jani.nikula@linux.intel.com>
To: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>,
Paulo Zanoni <przanoni@gmail.com>,
intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH 2/6] drm/i915: properly disable the VDD when disabling the panel
Date: Fri, 14 Mar 2014 14:07:30 +0200 [thread overview]
Message-ID: <87ob190yrh.fsf@intel.com> (raw)
In-Reply-To: <1394233524-3522-3-git-send-email-przanoni@gmail.com>
On Sat, 08 Mar 2014, Paulo Zanoni <przanoni@gmail.com> wrote:
> From: Paulo Zanoni <paulo.r.zanoni@intel.com>
>
> Commit b3064154dfd37deb386b1e459c54e1ca2460b3d5 tried to revert commit
> dff392dbd258381a6c3164f38420593f2d291e3b, but wasn't complete, which
> resulted in regressions on Haswell. So this commit should fix
> b3064154dfd37deb386b1e459c54e1ca2460b3d5 by undoing what it did and
> providing an actual complete revert of
> dff392dbd258381a6c3164f38420593f2d291e3b.
>
> Fixes regression introduced by:
> commit b3064154dfd37deb386b1e459c54e1ca2460b3d5
> Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
> Date: Tue Mar 4 00:42:44 2014 +0100
> drm/i915: Don't just say it, actually force edp vdd
Patrik, would you mind acking/testing this patch, as it blames your
commit for regressing?
Thanks,
Jani.
>
> Testcase: igt/pm_pc8
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 1 +
> drivers/gpu/drm/i915/intel_dp.c | 9 ++++++---
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 3 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index e2665e0..34e8bb3 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1340,6 +1340,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
> if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
> struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> + edp_panel_vdd_on(intel_dp);
> intel_edp_panel_off(intel_dp);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 22e1bdd..e936f36 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -91,7 +91,6 @@ static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
> }
>
> static void intel_dp_link_down(struct intel_dp *intel_dp);
> -static void edp_panel_vdd_on(struct intel_dp *intel_dp);
> static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
>
> static int
> @@ -1162,7 +1161,7 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
> return control;
> }
>
> -static void edp_panel_vdd_on(struct intel_dp *intel_dp)
> +void edp_panel_vdd_on(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -1338,11 +1337,16 @@ void intel_edp_panel_off(struct intel_dp *intel_dp)
>
> pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
>
> + intel_dp->want_panel_vdd = false;
> +
> I915_WRITE(pp_ctrl_reg, pp);
> POSTING_READ(pp_ctrl_reg);
>
> intel_dp->last_power_cycle = jiffies;
> wait_panel_off(intel_dp);
> +
> + /* We got a reference when we enabled the VDD. */
> + intel_runtime_pm_put(dev_priv);
> }
>
> void intel_edp_backlight_on(struct intel_dp *intel_dp)
> @@ -1880,7 +1884,6 @@ static void intel_disable_dp(struct intel_encoder *encoder)
> intel_edp_backlight_off(intel_dp);
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> intel_edp_panel_off(intel_dp);
> - edp_panel_vdd_off(intel_dp, true);
>
> /* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */
> if (!(port == PORT_A || IS_VALLEYVIEW(dev)))
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 9c70905..805d207 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -762,6 +762,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
> void intel_edp_psr_enable(struct intel_dp *intel_dp);
> void intel_edp_psr_disable(struct intel_dp *intel_dp);
> void intel_edp_psr_update(struct drm_device *dev);
> +void edp_panel_vdd_on(struct intel_dp *intel_dp);
>
>
> /* intel_dsi.c */
> --
> 1.8.5.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2014-03-14 12:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-07 23:05 [PATCH 0/6] More runtime PM fixes Paulo Zanoni
2014-03-07 23:05 ` [PATCH 1/6] drm/i915: don't schedule force_wake_timer at gen6_read Paulo Zanoni
2014-03-08 9:36 ` Chris Wilson
2014-03-08 10:27 ` Daniel Vetter
2014-03-07 23:05 ` [PATCH 2/6] drm/i915: properly disable the VDD when disabling the panel Paulo Zanoni
2014-03-14 12:07 ` Jani Nikula [this message]
2014-03-14 13:57 ` Daniel Vetter
2014-03-14 19:00 ` Patrik Jakobsson
2014-03-18 11:27 ` Jani Nikula
2014-03-07 23:05 ` [PATCH 3/6] drm/i915: get runtime PM at i915_reg_read_ioctl Paulo Zanoni
2014-03-07 23:05 ` [PATCH 4/6] drm/i915: don't get/put runtime PM at the debugfs forcewake file Paulo Zanoni
2014-03-07 23:05 ` [PATCH 5/6] drm/i915: don't read pp_ctrl_reg if we're suspended Paulo Zanoni
2014-03-07 23:05 ` [PATCH 6/6] drm/i915: get runtime PM at intel_set_mode Paulo Zanoni
2014-03-08 10:04 ` Daniel Vetter
2014-03-10 16:17 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ob190yrh.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=patrik.r.jakobsson@gmail.com \
--cc=paulo.r.zanoni@intel.com \
--cc=przanoni@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox