public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: deepak.s@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] Revert "drm/i915/chv: Set min freq to efficient	frequency on chv"
Date: Fri, 12 Aug 2016 10:34:31 +0300	[thread overview]
Message-ID: <87r39uv3so.fsf@intel.com> (raw)
In-Reply-To: <1470991834-64605-1-git-send-email-deepak.s@linux.intel.com>

On Fri, 12 Aug 2016, deepak.s@linux.intel.com wrote:
> From: Deepak S <deepak.s@linux.intel.com>
>
> With latest Punit FW, vgg input voltag drop falling to minimum is fixed.
> So reverting the WA patch & moving to turbo freq opreation range to [RPn -> RP0]

IOW, this patch will regress for anyone who does *not* have the latest
Punit firmware. Can we check for the firmware version, and act
accordingly? How does one go about updating the firmware, if at all?

Definitely NAK until the above is cleared.

BR,
Jani.


>
> This reverts commit 5b7c91b78b1ce6663e0f1f037f6cb4d7c9537d44.
>
> commit 5b7c91b78b1ce6663e0f1f037f6cb4d7c9537d44
> Author: Deepak S <deepak.s@linux.intel.com>
> Date:   Sat May 9 18:15:46 2015 +0530
>
>     drm/i915/chv: Set min freq to efficient frequency on chv
>
> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 21 +++++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 81ab119..e59799a 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5579,6 +5579,24 @@ static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
>  	return rp1;
>  }
>  
> +static int cherryview_rps_min_freq(struct drm_i915_private *dev_priv)
> +{
> +	struct drm_device *dev = &dev_priv->drm;
> +	u32 val, rpn;
> +
> +	if (dev->pdev->revision >= 0x20) {
> +		val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE);
> +		rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) &
> +		       FB_GFX_FREQ_FUSE_MASK);
> +	} else { /* For pre-production hardware */
> +		val = vlv_punit_read(dev_priv, PUNIT_GPU_STATUS_REG);
> +		rpn = ((val >> PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT) &
> +		       PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK);
> +	}
> +
> +	return rpn;
> +}
> +
>  static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
>  {
>  	u32 val, rp1;
> @@ -5818,8 +5836,7 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
>  			 intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq),
>  			 dev_priv->rps.rp1_freq);
>  
> -	/* PUnit validated range is only [RPe, RP0] */
> -	dev_priv->rps.min_freq = dev_priv->rps.efficient_freq;
> +	dev_priv->rps.min_freq = cherryview_rps_min_freq(dev_priv);
>  	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
>  			 intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
>  			 dev_priv->rps.min_freq);

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-08-12  7:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-12  8:50 [PATCH] Revert "drm/i915/chv: Set min freq to efficient frequency on chv" deepak.s
2016-08-12  5:32 ` Chris Wilson
2016-08-12 11:22   ` [PATCH v2] " deepak.s
2016-08-12  6:12     ` kbuild test robot
2016-08-12  6:23       ` Chris Wilson
2016-08-12  7:35         ` Deepak S
2016-08-12  6:14     ` kbuild test robot
2016-08-12  6:35     ` Ville Syrjälä
2016-08-12  6:37       ` Ville Syrjälä
2016-08-12 13:16         ` [PATCH v3] drm/i915/chv: Set min freq to RPn on CHV deepak.s
2017-02-14 21:28           ` Ville Syrjälä
2016-08-12  7:00     ` [PATCH v2] Revert "drm/i915/chv: Set min freq to efficient frequency on chv" kbuild test robot
2016-08-12  6:03 ` ✗ Fi.CI.BAT: failure for Revert "drm/i915/chv: Set min freq to efficient frequency on chv" (rev2) Patchwork
2016-08-12  6:11 ` ✗ Ro.CI.BAT: " Patchwork
2016-08-12  7:34 ` Jani Nikula [this message]
2016-08-12 10:33   ` [PATCH] Revert "drm/i915/chv: Set min freq to efficient frequency on chv" Deepak S
2016-08-12  8:12 ` ✗ Ro.CI.BAT: failure for Revert "drm/i915/chv: Set min freq to efficient frequency on chv" (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r39uv3so.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=deepak.s@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox