From: Jani Nikula <jani.nikula@linux.intel.com>
To: deepak.s@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Add boot paramter to control rps boost at boot time.
Date: Mon, 03 Mar 2014 16:00:53 +0200 [thread overview]
Message-ID: <87r46jpeju.fsf@intel.com> (raw)
In-Reply-To: <1393826774-32237-1-git-send-email-deepak.s@intel.com>
On Mon, 03 Mar 2014, deepak.s@intel.com wrote:
> From: Deepak S <deepak.s@intel.com>
>
> We are adding a module paramter to control rps boost. By default, we
> enable the boost for better performace. Based on the need (perf/power)
> we can either enable/disable.
>
> Signed-off-by: Deepak S <deepak.s@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/i915_gem.c | 15 ++++++++++++++-
> drivers/gpu/drm/i915/i915_params.c | 8 ++++++++
> 3 files changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 2baeeef..398b101 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1963,6 +1963,7 @@ struct i915_params {
> int panel_use_ssc;
> int vbt_sdvo_panel_type;
> int enable_rc6;
> + int enable_rps_boost;
> int enable_fbc;
> bool enable_hangcheck;
> int enable_ppgtt;
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index a8a069f..1478ea6 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -990,6 +990,17 @@ static bool can_wait_boost(struct drm_i915_file_private *file_priv)
> return !atomic_xchg(&file_priv->rps_wait_boost, true);
> }
>
> +static int intel_enable_rps_boost(struct drm_device *dev)
> +{
> + /* No RPS Boost before Ironlake */
> + if (INTEL_INFO(dev)->gen < 6)
> + return 0;
> +
> + /* Respect the kernel parameter if it is set */
> + return i915.enable_rps_boost;
> +
> +}
> +
> /**
> * __wait_seqno - wait until execution of seqno has finished
> * @ring: the ring expected to report seqno
> @@ -1030,7 +1041,9 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno,
> timeout_expire = timeout ? jiffies + timespec_to_jiffies_timeout(timeout) : 0;
>
> if (dev_priv->info->gen >= 6 && can_wait_boost(file_priv)) {
> - gen6_rps_boost(dev_priv);
> + if (intel_enable_rps_boost(ring->dev))
> + gen6_rps_boost(dev_priv);
> +
> if (file_priv)
> mod_delayed_work(dev_priv->wq,
> &file_priv->mm.idle_work,
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index c743057..a19bd7d 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -47,6 +47,7 @@ struct i915_params i915 __read_mostly = {
> .prefault_disable = 0,
> .reset = true,
> .invert_brightness = 0,
> + .enable_rps_boost = 1,
> };
>
> module_param_named(modeset, i915.modeset, int, 0400);
> @@ -153,3 +154,10 @@ MODULE_PARM_DESC(invert_brightness,
> "report PCI device ID, subsystem vendor and subsystem device ID "
> "to dri-devel@lists.freedesktop.org, if your machine needs it. "
> "It will then be included in an upcoming module version.");
> +
> +module_param_named(enable_rps_boost, i915.enable_rps_boost, int, 0600);
> +MODULE_PARM_DESC(enable_rps_boost,
> + "Enable/Disable boost RPS frequency (default: true)");
Everything about this parameter says it's bool, except that it's an
int...
Jani.
> +
> +
> +
> --
> 1.8.5.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2014-03-03 14:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-03 6:06 [PATCH] drm/i915: Add boot paramter to control rps boost at boot time deepak.s
2014-03-03 14:00 ` Jani Nikula [this message]
2014-03-03 14:34 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r46jpeju.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=deepak.s@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox