From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Arun Siluvery <arun.siluvery@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Subject: Re: [PATCH] lib/rendercopy_gen9: Setup Push constant pointer before sending BTP commands
Date: Thu, 13 Aug 2015 13:06:28 +0300 [thread overview]
Message-ID: <87si7nwli3.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <1439378761-9625-1-git-send-email-arun.siluvery@linux.intel.com>
Arun Siluvery <arun.siluvery@linux.intel.com> writes:
> From Gen9, by default push constant command is not committed to the shader unit
> untill the corresponding shader's BTP_* command is parsed. This is the
> behaviour when set shader is enabled. This patch updates the batch to follow
> this requirement otherwise it results in gpu hang.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89959
>
> Set shader need to be disabled if legacy behaviour is required.
>
> Cc: Ben Widawsky <benjamin.widawsky@intel.com>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
> ---
>
with skl-y,
Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
> If this patch is applied then we don't need to disable set shader bit
> in kernel and the following can be discarded.
>
> http://lists.freedesktop.org/archives/intel-gfx/2015-August/073425.html
>
> lib/rendercopy_gen9.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/lib/rendercopy_gen9.c b/lib/rendercopy_gen9.c
> index 4a4a604..9537480 100644
> --- a/lib/rendercopy_gen9.c
> +++ b/lib/rendercopy_gen9.c
> @@ -590,13 +590,9 @@ gen8_emit_multisample(struct intel_batchbuffer *batch) {
>
> static void
> gen8_emit_vs(struct intel_batchbuffer *batch) {
> - OUT_BATCH(GEN7_3DSTATE_BINDING_TABLE_POINTERS_VS);
> + OUT_BATCH(GEN6_3DSTATE_CONSTANT_VS | (11-2));
> OUT_BATCH(0);
> -
> - OUT_BATCH(GEN7_3DSTATE_SAMPLER_STATE_POINTERS_VS);
> OUT_BATCH(0);
> -
> - OUT_BATCH(GEN6_3DSTATE_CONSTANT_VS | (11-2));
> OUT_BATCH(0);
> OUT_BATCH(0);
> OUT_BATCH(0);
> @@ -605,7 +601,11 @@ gen8_emit_vs(struct intel_batchbuffer *batch) {
> OUT_BATCH(0);
> OUT_BATCH(0);
> OUT_BATCH(0);
> +
> + OUT_BATCH(GEN7_3DSTATE_BINDING_TABLE_POINTERS_VS);
> OUT_BATCH(0);
> +
> + OUT_BATCH(GEN7_3DSTATE_SAMPLER_STATE_POINTERS_VS);
> OUT_BATCH(0);
>
> OUT_BATCH(GEN6_3DSTATE_VS | (9-2));
> @@ -998,14 +998,14 @@ void gen9_render_copyfunc(struct intel_batchbuffer *batch,
>
> gen8_emit_sf(batch);
>
> + gen8_emit_ps(batch, ps_kernel_off);
> +
> OUT_BATCH(GEN7_3DSTATE_BINDING_TABLE_POINTERS_PS);
> OUT_BATCH(ps_binding_table);
>
> OUT_BATCH(GEN7_3DSTATE_SAMPLER_STATE_POINTERS_PS);
> OUT_BATCH(ps_sampler_state);
>
> - gen8_emit_ps(batch, ps_kernel_off);
> -
> OUT_BATCH(GEN6_3DSTATE_SCISSOR_STATE_POINTERS);
> OUT_BATCH(scissor_state);
>
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-08-13 10:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 11:26 [PATCH] lib/rendercopy_gen9: Setup Push constant pointer before sending BTP commands Arun Siluvery
2015-08-12 12:10 ` Joonas Lahtinen
2015-08-13 1:35 ` Ben Widawsky
2015-08-13 7:33 ` Joonas Lahtinen
2015-08-13 22:49 ` Ben Widawsky
2015-08-14 8:58 ` Daniel Vetter
2015-08-18 14:25 ` Joonas Lahtinen
2015-08-19 1:44 ` Ben Widawsky
2015-08-13 10:06 ` Mika Kuoppala [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87si7nwli3.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=arun.siluvery@linux.intel.com \
--cc=benjamin.widawsky@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox