From: Jani Nikula <jani.nikula@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Convert hsw_compute_linetime_wm to use in-flight state
Date: Tue, 06 Oct 2015 17:34:22 +0300 [thread overview]
Message-ID: <87twq483rl.fsf@intel.com> (raw)
In-Reply-To: <1443718411-20753-1-git-send-email-matthew.d.roper@intel.com>
[-- Attachment #1: Type: text/plain, Size: 1212 bytes --]
On Thu, 01 Oct 2015, Matt Roper <matthew.d.roper@intel.com> wrote:
> When watermark calculation was moved up to the atomic check phase, the
> code was updated to calculate based on in-flight atomic state rather
> than already-committed state. However the hsw_compute_linetime_wm()
> didn't get updated and continued to pull values out of the
> currently-committed CRTC state. On platforms that call this function
> (HSW/BDW only), this will cause problems when we go to enable the CRTC
> since we'll pull the current mode (off) rather than the mode we're
> calculating for and wind up with a divide by zero error.
>
> This was an oversight in commit:
>
> commit a28170f3389f4e42db95e595b0d86384a79de696
> Author: Matt Roper <matthew.d.roper@intel.com>
> Date: Thu Sep 24 15:53:16 2015 -0700
>
> drm/i915: Calculate ILK-style watermarks during atomic check (v3)
>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Matt, current nightly + "drm/i915: Sanitize watermarks after hardware
state readout" + this still oopses my BDW at boot. dmesg attached.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 67658 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-rc4-bisect-00536-g400a6b9 (jani@nukke) (gcc version 4.9.2 (Debian 4.9.2-10) ) #86 SMP Wed Oct 7 01:27:22 EEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc4-bisect-00536-g400a6b9 root=UUID=181461f1-6b98-43c3-8984-05f81ca9f77e ro log_buf_len=4M drm.debug=14 quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d132efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d132f000-0x00000000d1809fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d180a000-0x00000000d9324fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9325000-0x00000000d9383fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9384000-0x00000000d93a6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d93a7000-0x00000000d9cd6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9cd7000-0x00000000d9fa2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fa3000-0x00000000d9ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xd938b000 ACPI 2.0=0xd938b000 SMBIOS=0xf05b0 MPS=0xfd640
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/NUC5i3RYB, BIOS RYBDWi35.86A.0130.2014.1203.1639 12/03/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 7 base 021F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xda000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f600000-0x21f7fffff]
[ 0.000000] [mem 0x21f600000-0x21f7fffff] page 2M
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21f5fffff]
[ 0.000000] [mem 0x200000000-0x21f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd132efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd11fffff] page 2M
[ 0.000000] [mem 0xd1200000-0xd132efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd180a000-0xd9324fff]
[ 0.000000] [mem 0xd180a000-0xd19fffff] page 4k
[ 0.000000] [mem 0xd1a00000-0xd91fffff] page 2M
[ 0.000000] [mem 0xd9200000-0xd9324fff] page 4k
[ 0.000000] BRK [0x01b29000, 0x01b29fff] PGTABLE
[ 0.000000] BRK [0x01b2a000, 0x01b2afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] log_buf_len: 4194304 bytes
[ 0.000000] early log buf free: 124928(95%)
[ 0.000000] RAMDISK: [mem 0x37704000-0x37b79fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D938B000 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000D938B090 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D939EDA8 00010C (v05 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D938B1B8 013BEA (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000D9CD5F80 000040
[ 0.000000] ACPI: APIC 0x00000000D939EEB8 000084 (v03 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D939EF40 000044 (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D939EF88 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D939F028 00003C (v01 INTEL NUC5i3RY 00000082 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D939F068 000038 (v01 INTEL NUC5i3RY 00000082 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D939F0A0 000315 (v01 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D939F3B8 000042 (v01 INTEL NUC5i3RY 00000082 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D939F400 000C7D (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000D93A0080 0000A0 (v32 INTEL NUC5i3RY 00000082 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000D93A0120 000539 (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D93A0660 000B74 (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D93A11D8 005BEF (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000D93A6DC8 0000D4 (v01 INTEL NUC5i3RY 00000082 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000D93A6EA0 000038 (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21f3f9000-0x21f3fcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216a00000-ffff88021e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d132efff]
[ 0.000000] node 0: [mem 0x00000000d180a000-0x00000000d9324fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
[ 0.000000] On node 0 totalpages: 2065896
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13818 pages used for memmap
[ 0.000000] DMA32 zone: 884299 pages, LIFO batch:31
[ 0.000000] Normal zone: 18400 pages used for memmap
[ 0.000000] Normal zone: 1177600 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdb800000-0xdf7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd132f000-0xd1809fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9325000-0xd9383fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9384000-0xd93a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd93a7000-0xd9cd6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9cd7000-0xd9fa2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fa3000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021f000000 s93848 r8192 d29032 u524288
[ 0.000000] pcpu-alloc: s93848 r8192 d29032 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033589
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc4-bisect-00536-g400a6b9 root=UUID=181461f1-6b98-43c3-8984-05f81ca9f77e ro log_buf_len=4M drm.debug=14 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7968052K/8263584K available (5331K kernel code, 1095K rwdata, 1880K rodata, 1248K init, 844K bss, 295532K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2095.147 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.29 BogoMIPS (lpj=8380588)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20150818
[ 0.018777] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.019590] Security Framework initialized
[ 0.019592] Yama: becoming mindful.
[ 0.019597] AppArmor: AppArmor disabled by boot time parameter
[ 0.020090] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021774] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022524] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022534] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022747] Initializing cgroup subsys io
[ 0.022752] Initializing cgroup subsys memory
[ 0.022761] Initializing cgroup subsys devices
[ 0.022763] Initializing cgroup subsys freezer
[ 0.022765] Initializing cgroup subsys net_cls
[ 0.022767] Initializing cgroup subsys perf_event
[ 0.022769] Initializing cgroup subsys net_prio
[ 0.022793] CPU: Physical Processor ID: 0
[ 0.022794] CPU: Processor Core ID: 0
[ 0.022798] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022799] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023859] mce: CPU supports 7 MCE banks
[ 0.023872] CPU0: Thermal monitoring enabled (TM1)
[ 0.023880] process: using mwait in idle threads
[ 0.023883] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023884] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024226] Freeing SMP alternatives memory: 20K (ffffffff81a4b000 - ffffffff81a50000)
[ 0.027753] ftrace: allocating 22871 entries in 90 pages
[ 0.037189] DMAR: Host address width 39
[ 0.037191] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.037201] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.037203] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.037207] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.037209] DMAR: RMRR base: 0x000000d9efc000 end: 0x000000d9f0afff
[ 0.037210] DMAR: RMRR base: 0x000000db000000 end: 0x000000df7fffff
[ 0.037211] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.037214] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.037215] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.037216] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.037217] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.037653] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.037654] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.038284] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077994] TSC deadline timer enabled
[ 0.077997] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.078021] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[ 0.078041] ... version: 3
[ 0.078042] ... bit width: 48
[ 0.078043] ... generic registers: 4
[ 0.078044] ... value mask: 0000ffffffffffff
[ 0.078045] ... max period: 0000ffffffffffff
[ 0.078045] ... fixed-purpose events: 3
[ 0.078046] ... event mask: 000000070000000f
[ 0.078534] x86: Booting SMP configuration:
[ 0.078535] .... node #0, CPUs: #1
[ 0.082140] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.082214] #2 #3
[ 0.089502] x86: Booted up 1 node, 4 CPUs
[ 0.089505] smpboot: Total of 4 processors activated (16761.17 BogoMIPS)
[ 0.093277] devtmpfs: initialized
[ 0.095792] PM: Registering ACPI NVS region [mem 0xd93a7000-0xd9cd6fff] (9633792 bytes)
[ 0.096039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096119] pinctrl core: initialized pinctrl subsystem
[ 0.096261] NET: Registered protocol family 16
[ 0.105120] cpuidle: using governor ladder
[ 0.117115] cpuidle: using governor menu
[ 0.117190] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.117191] ACPI: bus type PCI registered
[ 0.117193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117249] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.117251] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.117259] PCI: Using configuration type 1 for base access
[ 0.129433] ACPI: Added _OSI(Module Device)
[ 0.129435] ACPI: Added _OSI(Processor Device)
[ 0.129436] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.129437] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134660] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.139585] ACPI: Dynamic OEM Table Load:
[ 0.139591] ACPI: SSDT 0xFFFF880214CC4C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.140397] ACPI: Dynamic OEM Table Load:
[ 0.140402] ACPI: SSDT 0xFFFF880214CA6800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.141282] ACPI: Dynamic OEM Table Load:
[ 0.141285] ACPI: SSDT 0xFFFF880214CCFC00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.142862] ACPI: Interpreter enabled
[ 0.142871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[ 0.142878] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.142894] ACPI: (supports S0 S3 S4 S5)
[ 0.142895] ACPI: Using IOAPIC for interrupt routing
[ 0.142927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.145165] ACPI: Power Resource [PG00] (on)
[ 0.145588] ACPI: Power Resource [PG01] (on)
[ 0.145998] ACPI: Power Resource [PG02] (on)
[ 0.156885] ACPI: Power Resource [FN00] (off)
[ 0.156966] ACPI: Power Resource [FN01] (off)
[ 0.157046] ACPI: Power Resource [FN02] (off)
[ 0.157123] ACPI: Power Resource [FN03] (off)
[ 0.157207] ACPI: Power Resource [FN04] (off)
[ 0.158250] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.158256] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.158383] \_SB_.PCI0:_OSC invalid UUID
[ 0.158384] _OSC request data:1 1f 0
[ 0.158388] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.158888] PCI host bridge to bus 0000:00
[ 0.158891] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.158893] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.158894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.158896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.158898] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.158905] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.159005] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.159020] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.159026] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.159031] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.159119] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.159132] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
[ 0.159237] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.159261] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.159309] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.159365] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.159405] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.159433] pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit]
[ 0.159488] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.159595] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[ 0.159617] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.159625] pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff]
[ 0.159632] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.159675] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.159730] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.159768] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.159789] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.159828] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.159893] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.159937] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.160001] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.160084] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.160129] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.160198] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.160280] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.160323] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.160350] pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff]
[ 0.160419] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.160476] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.160517] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.160696] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.160715] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.160722] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.160729] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.160736] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.160742] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.160749] pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff]
[ 0.160774] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.160851] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.160866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
[ 0.160885] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.161064] acpiphp: Slot [1] registered
[ 0.161076] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161376] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.161483] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.161709] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.161818] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.169474] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.169480] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.170367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170422] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.170476] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.170528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.170581] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.170633] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.170685] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.170737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171077] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.171178] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.171180] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171182] vgaarb: loaded
[ 0.171184] vgaarb: bridge control possible 0000:00:02.0
[ 0.171287] PCI: Using ACPI for IRQ routing
[ 0.172589] PCI: pci_cache_line_size set to 64 bytes
[ 0.172909] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.172910] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.172911] e820: reserve RAM buffer [mem 0xd132f000-0xd3ffffff]
[ 0.172912] e820: reserve RAM buffer [mem 0xd9325000-0xdbffffff]
[ 0.172914] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.172915] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[ 0.173059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.173064] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.175090] clocksource: Switched to clocksource hpet
[ 0.180244] pnp: PnP ACPI init
[ 0.180420] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.180424] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180669] pnp 00:01: [dma 0 disabled]
[ 0.180701] pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active)
[ 0.180789] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.180791] system 00:02: [io 0xffff] has been reserved
[ 0.180793] system 00:02: [io 0xffff] has been reserved
[ 0.180795] system 00:02: [io 0xffff] has been reserved
[ 0.180797] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.180799] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.180801] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180843] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.180880] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.180882] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.181080] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.181082] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.181084] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.181086] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.181089] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.181091] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.181093] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.181095] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.181097] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.181099] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.181102] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.181104] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.181106] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181693] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.181695] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.181697] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.181699] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.181701] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.181703] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.181706] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182226] pnp: PnP ACPI: found 7 devices
[ 0.188488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.188517] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.188530] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.188535] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.188543] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.188545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.188546] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.188548] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
[ 0.188550] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.188607] NET: Registered protocol family 2
[ 0.188768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.188906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.189028] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.189053] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.189080] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.189155] NET: Registered protocol family 1
[ 0.189171] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.207292] PCI: CLS 64 bytes, default 64
[ 0.207335] Unpacking initramfs...
[ 0.292828] Freeing initrd memory: 4568K (ffff880037704000 - ffff880037b7a000)
[ 0.292850] DMAR: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 0.292859] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.292861] software IO TLB [mem 0xc9821000-0xcd821000] (64MB) mapped at [ffff8800c9821000-ffff8800cd820fff]
[ 0.292920] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.292922] hw unit of domain pp0-core 2^-14 Joules
[ 0.292923] hw unit of domain package 2^-14 Joules
[ 0.292924] hw unit of domain dram 2^-14 Joules
[ 0.292924] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.293040] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293049] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293056] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293064] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293115] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.293173] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x1fa4000 bytes, mapped to 0xffffc90002000000
[ 0.293175] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=3840x2160x32, linelength=15360
[ 0.310965] Console: switching to colour frame buffer device 480x135
[ 0.328585] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.328833] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.328866] audit: initializing netlink subsys (disabled)
[ 0.328882] audit: type=2000 audit(1444170630.320:1): initialized
[ 0.329299] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.329318] zbud: loaded
[ 0.329459] VFS: Disk quotas dquot_6.6.0
[ 0.329478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.329905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.329935] io scheduler noop registered
[ 0.329938] io scheduler deadline registered
[ 0.329952] io scheduler cfq registered (default)
[ 0.330294] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.330301] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.330324] intel_idle: MWAIT substates: 0x11142120
[ 0.330325] intel_idle: v0.4 model 0x3D
[ 0.330326] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.330592] GHES: HEST is not enabled!
[ 0.330655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.351165] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.351618] Linux agpgart interface v0.103
[ 0.351668] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.351669] AMD IOMMUv2 functionality not available on this system
[ 0.352021] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.355118] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.355122] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.355239] mousedev: PS/2 mouse device common for all mice
[ 0.355294] rtc_cmos 00:03: RTC can wake from S4
[ 0.355429] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.355458] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.355470] Intel P-state driver initializing.
[ 0.355601] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.357003] NET: Registered protocol family 10
[ 0.357401] mip6: Mobile IPv6
[ 0.357423] NET: Registered protocol family 17
[ 0.358154] registered taskstats version 1
[ 0.358201] zswap: loaded using pool lzo/zbud
[ 0.359289] console [netcon0] enabled
[ 0.359295] netconsole: network logging started
[ 0.359360] rtc_cmos 00:03: setting system clock to 2015-10-06 22:30:30 UTC (1444170630)
[ 0.359572] PM: Hibernation image not present or could not be loaded.
[ 0.360227] Freeing unused kernel memory: 1248K (ffffffff81913000 - ffffffff81a4b000)
[ 0.360230] Write protecting the kernel read-only data: 8192k
[ 0.360952] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.361111] Freeing unused kernel memory: 168K (ffff8800017d6000 - ffff880001800000)
[ 0.372213] systemd-udevd[75]: starting version 215
[ 0.372480] random: systemd-udevd urandom read with 5 bits of entropy available
[ 0.382953] sdhci: Secure Digital Host Controller Interface driver
[ 0.382956] sdhci: Copyright(c) Pierre Ossman
[ 0.382991] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.392549] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.392552] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.393143] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.393147] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.394510] ACPI: bus type USB registered
[ 0.394533] usbcore: registered new interface driver usbfs
[ 0.394542] usbcore: registered new interface driver hub
[ 0.394566] usbcore: registered new device driver usb
[ 0.395068] pps_core: LinuxPPS API ver. 1 registered
[ 0.395071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.395428] PTP clock support registered
[ 0.395622] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.395628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.395714] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.395719] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.395900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.395902] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.395904] usb usb1: Product: xHCI Host Controller
[ 0.395905] usb usb1: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 xhci-hcd
[ 0.395906] usb usb1: SerialNumber: 0000:00:14.0
[ 0.396038] hub 1-0:1.0: USB hub found
[ 0.396051] hub 1-0:1.0: 11 ports detected
[ 0.396297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.396514] ehci-pci: EHCI PCI platform driver
[ 0.396527] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.396529] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.400000] SCSI subsystem initialized
[ 0.401731] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.401739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.401789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.401792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.401794] usb usb2: Product: xHCI Host Controller
[ 0.401797] usb usb2: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 xhci-hcd
[ 0.401799] usb usb2: SerialNumber: 0000:00:14.0
[ 0.401928] libata version 3.00 loaded.
[ 0.401964] hub 2-0:1.0: USB hub found
[ 0.401977] hub 2-0:1.0: 4 ports detected
[ 0.404210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.404218] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.404233] ehci-pci 0000:00:1d.0: debug port 2
[ 0.408133] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.408393] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000
[ 0.419276] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.419333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.419335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.419337] usb usb3: Product: EHCI Host Controller
[ 0.419339] usb usb3: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 ehci_hcd
[ 0.419340] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.419551] hub 3-0:1.0: USB hub found
[ 0.419557] hub 3-0:1.0: 2 ports detected
[ 0.419888] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.590451] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.590454] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:72:2e:00
[ 0.590456] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.590482] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.590617] ahci 0000:00:1f.2: version 3.0
[ 0.603416] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.603420] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.603963] scsi host0: ahci
[ 0.604087] scsi host1: ahci
[ 0.604245] scsi host2: ahci
[ 0.604350] scsi host3: ahci
[ 0.604412] ata1: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139100 irq 44
[ 0.604414] ata2: DUMMY
[ 0.604416] ata3: DUMMY
[ 0.604417] ata4: DUMMY
[ 0.711413] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 0.731422] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.845865] usb 1-1: New USB device found, idVendor=04b3, idProduct=3025
[ 0.845868] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.845870] usb 1-1: Product: USB NetVista Full Width Keyboard.
[ 0.845871] usb 1-1: Manufacturer: LITE-ON Technology
[ 0.846030] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 0.851404] usbcore: registered new interface driver usbhid
[ 0.851406] usbhid: USB HID core driver
[ 0.851876] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04B3:3025.0001/input/input2
[ 0.863828] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[ 0.863831] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.864112] hub 3-1:1.0: USB hub found
[ 0.864174] hub 3-1:1.0: 8 ports detected
[ 0.907676] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-1/input0
[ 0.923535] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.926506] ata1.00: ATA-10: INTEL SSDSC2BW240H6, RG20, max UDMA/133
[ 0.926509] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.939850] ata1.00: configured for UDMA/133
[ 0.940114] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 RG20 PQ: 0 ANSI: 5
[ 0.941859] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 0.941950] sd 0:0:0:0: [sda] Write Protect is off
[ 0.941953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.941975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.942909] sda: sda1 sda2 sda3
[ 0.943197] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.943635] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.964000] PM: Starting manual resume from disk
[ 0.964005] PM: Hibernation image partition 8:3 present
[ 0.964006] PM: Looking for hibernation image.
[ 0.964159] PM: Image not found (code -22)
[ 0.964161] PM: Hibernation image not present or could not be loaded.
[ 1.000364] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.015552] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 1.084367] fuse init (API version 7.23)
[ 1.100774] systemd-udevd[182]: starting version 215
[ 1.158381] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.158388] ACPI: Sleep Button [SLPB]
[ 1.158459] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.158463] ACPI: Power Button [PWRB]
[ 1.158562] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.158565] ACPI: Power Button [PWRF]
[ 1.172872] nuvoton-cir 00:01: IR PNP Port not valid!
[ 1.173185] nuvoton-cir 00:01: disabled
[ 1.189305] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 1.193907] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
[ 1.193916] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.194322] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.194817] EFI Variables Facility v0.08 2004-May-17
[ 1.203273] [drm] Initialized drm 1.1.0 20060810
[ 1.209042] usb 1-2: New USB device found, idVendor=046d, idProduct=c52a
[ 1.209048] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.209051] usb 1-2: Product: 2.4GHz Cordless Desktop
[ 1.209053] usb 1-2: Manufacturer: Logitech
[ 1.209168] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.209174] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.210091] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.214270] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52A.0002/input/input9
[ 1.214295] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 1.214688] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 1.226143] AVX2 version of gcm_enc/dec engaged.
[ 1.226146] AES CTR mode by8 optimization enabled
[ 1.226445] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 1.226472] [drm:intel_detect_pch] Found LynxPoint LP PCH
[ 1.226546] [drm] Memory usable by graphics device = 4096M
[ 1.226549] [drm:i915_gem_gtt_init] GMADR size = 256M
[ 1.226551] [drm:i915_gem_gtt_init] GTT stolen size = 64M
[ 1.226553] [drm:i915_gem_gtt_init] ppgtt mode: 2
[ 1.226556] checking generic (e0000000 1fa4000) vs hw (e0000000 10000000)
[ 1.226557] fb: switching to inteldrmfb from simple
[ 1.226615] Console: switching to colour dummy device 80x25
[ 1.226856] [drm] Replacing VGA console driver
[ 1.227177] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd9cd0018
[ 1.227187] [drm:intel_opregion_setup] Public ACPI methods supported
[ 1.227189] [drm:intel_opregion_setup] SWSCI supported
[ 1.227650] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 1.227655] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.227658] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.227660] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 1.227662] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 1.227664] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 1.234367] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
[ 1.234371] [drm:intel_opregion_setup] ASLE supported
[ 1.234634] [drm:intel_device_info_runtime_init] slice total: 1
[ 1.234637] [drm:intel_device_info_runtime_init] subslice total: 3
[ 1.234639] [drm:intel_device_info_runtime_init] subslice per slice: 3
[ 1.234640] [drm:intel_device_info_runtime_init] EU total: 24
[ 1.234642] [drm:intel_device_info_runtime_init] EU per subslice: 8
[ 1.234644] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 1.234646] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 1.234647] [drm:intel_device_info_runtime_init] has EU power gating: n
[ 1.234649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.234651] [drm] Driver supports precise vblank timestamp query.
[ 1.234654] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[ 1.234657] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d
[ 1.234660] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.234662] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[ 1.234665] [drm:parse_lfp_panel_data] DRRS supported mode is static
[ 1.234668] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[ 1.234672] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.234674] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
[ 1.234676] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
[ 1.234679] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[ 1.234683] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.234685] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[ 1.234687] [drm:parse_driver_features] DRRS State Enabled:1
[ 1.234691] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 1.234693] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
[ 1.234695] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.234697] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
[ 1.234699] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.234701] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
[ 1.234712] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[ 1.234720] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
[ 1.234723] [drm:intel_power_well_enable] enabling always-on
[ 1.234725] [drm:intel_power_well_enable] enabling display
[ 1.234813] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 1.234815] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
[ 1.234817] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
[ 1.234819] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
[ 1.234822] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 1.234824] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 1.234826] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
[ 1.234827] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
[ 1.234829] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
[ 1.234831] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 1.234833] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 1.234834] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
[ 1.234836] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
[ 1.234838] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
[ 1.234840] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 1.234843] [drm:intel_modeset_init] 3 display pipes available.
[ 1.234863] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
[ 1.234865] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
[ 1.234866] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz
[ 1.234872] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.235242] [drm:intel_dp_init_connector] Adding DP connector on port C
[ 1.235278] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[ 1.241429] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
[ 1.241433] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
[ 1.241435] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
[ 1.241437] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.241439] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.241442] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
[ 1.241447] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A
[ 1.241450] [drm:intel_modeset_readout_hw_state] [ENCODER:38:DP MST-38] hw state readout: disabled, pipe A
[ 1.241452] [drm:intel_modeset_readout_hw_state] [ENCODER:39:DP MST-39] hw state readout: disabled, pipe B
[ 1.241454] [drm:intel_modeset_readout_hw_state] [ENCODER:40:DP MST-40] hw state readout: disabled, pipe C
[ 1.241457] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
[ 1.241461] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-1] hw state readout: enabled
[ 1.241464] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:HDMI-A-2] hw state readout: disabled
[ 1.241482] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8802145c5000 for pipe A
[ 1.241484] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 1.241486] [drm:intel_dump_pipe_config] pipe bpp: 30, dithering: 0
[ 1.241488] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241491] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 7653148, gmch_n: 8388608, link_m: 510209, link_n: 524288, tu: 64
[ 1.241494] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241496] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241497] [drm:intel_dump_pipe_config] requested mode:
[ 1.241501] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 30 262749 3840 3888 3920 4000 2160 2163 2168 2191 0x40 0x9
[ 1.241503] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241506] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 30 262749 3840 3888 3920 4000 2160 2163 2168 2191 0x40 0x9
[ 1.241509] [drm:intel_dump_crtc_timings] crtc timings: 262749 3840 3888 3920 4000 2160 2163 2168 2191, type: 0x40 flags: 0x9
[ 1.241511] [drm:intel_dump_pipe_config] port clock: 270000
[ 1.241513] [drm:intel_dump_pipe_config] pipe src size: 3840x2160
[ 1.241515] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241517] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241519] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0f000870, enabled
[ 1.241521] [drm:intel_dump_pipe_config] ips: 0
[ 1.241522] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241524] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[ 1.241526] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241528] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
[ 1.241531] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 1.241533] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1.241537] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff880213a72000 for pipe B
[ 1.241539] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1.241540] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.241543] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241545] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241547] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241549] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241550] [drm:intel_dump_pipe_config] requested mode:
[ 1.241553] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241555] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241558] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241561] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.241563] [drm:intel_dump_pipe_config] port clock: 0
[ 1.241564] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.241566] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241568] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241571] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.241572] [drm:intel_dump_pipe_config] ips: 0
[ 1.241574] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241576] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.241577] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241580] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
[ 1.241582] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[ 1.241584] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[ 1.241588] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff880213a6c000 for pipe C
[ 1.241589] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 1.241591] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.241593] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241596] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241598] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241600] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241601] [drm:intel_dump_pipe_config] requested mode:
[ 1.241604] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241605] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241608] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241611] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.241612] [drm:intel_dump_pipe_config] port clock: 0
[ 1.241614] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.241616] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241618] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241620] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.241622] [drm:intel_dump_pipe_config] ips: 0
[ 1.241623] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241625] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.241626] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241628] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
[ 1.241630] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[ 1.241632] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[ 1.241671] divide error: 0000 [#1] SMP
[ 1.241677] Modules linked in: snd_hda_codec_realtek(+) aesni_intel(+) snd_hda_codec_generic aes_x86_64 glue_helper i915(+) lrw gf128mul ablk_helper cryptd snd_hda_intel snd_hda_codec i2c_algo_bit snd_hwdep pcspkr snd_hda_core drm_kms_helper mei_me snd_pcm drm snd_timer mei snd psmouse soundcore lpc_ich serio_raw shpchp efivars mfd_core i2c_i801 tpm_tis tpm battery nuvoton_cir rc_core video i2c_designware_platform i2c_designware_core acpi_pad button processor fuse autofs4 ext4 crc16 mbcache jbd2 sg sd_mod hid_generic usbhid ahci libahci libata scsi_mod ehci_pci ehci_hcd e1000e xhci_pci ptp pps_core xhci_hcd usbcore usb_common fan thermal i2c_hid i2c_core sdhci_acpi sdhci hid mmc_core
[ 1.241748] CPU: 3 PID: 251 Comm: modprobe Not tainted 4.3.0-rc4-bisect-00536-g400a6b9 #86
[ 1.241752] Hardware name: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/NUC5i3RYB, BIOS RYBDWi35.86A.0130.2014.1203.1639 12/03/2014
[ 1.241756] task: ffff8802138343c0 ti: ffff8802145b0000 task.ti: ffff8802145b0000
[ 1.241760] RIP: 0010:[<ffffffffa04e591a>] [<ffffffffa04e591a>] ilk_compute_wm_level.isra.29+0x14a/0x2c0 [i915]
[ 1.241796] RSP: 0018:ffff8802145b36f8 EFLAGS: 00010206
[ 1.241799] RAX: 000000000000007f RBX: ffff880213e73700 RCX: 0000000000000000
[ 1.241802] RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000004025d
[ 1.241809] RBP: ffff880213e73400 R08: 000000000f000870 R09: ffff8800d873d280
[ 1.241814] R10: ffff8800d873d340 R11: 0000000000000002 R12: 0000000000000000
[ 1.241820] R13: ffff8800d873d1c0 R14: 0000000000000014 R15: 0000000000000014
[ 1.241825] FS: 00007fd01ed0f700(0000) GS:ffff88021f180000(0000) knlGS:0000000000000000
[ 1.241833] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.241838] CR2: 00007fc2fcae9000 CR3: 00000002147e2000 CR4: 00000000003406e0
[ 1.241843] Stack:
[ 1.241847] ffffffff00000014 0000000000000000 ffff8800d873d340 ffff8800d873d280
[ 1.241857] 00000000ffffffff ffff8800d43bd800 ffff880213e73400 ffff880213e73700
[ 1.241867] ffff8800d873d340 ffff8800d8701000 ffff8800d43bdb60 ffffffffa04e6804
[ 1.241876] Call Trace:
[ 1.241910] [<ffffffffa04e6804>] ? ilk_compute_pipe_wm+0x174/0x470 [i915]
[ 1.241920] [<ffffffff810ad04c>] ? mutex_optimistic_spin+0xec/0x1c0
[ 1.241963] [<ffffffffa0546f4c>] ? intel_crtc_atomic_check+0x10c/0x1f0 [i915]
[ 1.241971] [<ffffffffa0441a94>] ? drm_atomic_helper_check_planes+0x134/0x1b0 [drm_kms_helper]
[ 1.242009] [<ffffffffa054a016>] ? intel_atomic_check+0x9a6/0xfd0 [i915]
[ 1.242022] [<ffffffffa03b8dd3>] ? drm_atomic_get_connector_state+0x93/0x110 [drm]
[ 1.242063] [<ffffffffa054e7c3>] ? intel_modeset_setup_hw_state+0x9f3/0xe60 [i915]
[ 1.242077] [<ffffffffa03b7fe7>] ? drm_modeset_lock_all_crtcs+0x87/0xa0 [drm]
[ 1.242118] [<ffffffffa05507bb>] ? intel_modeset_init+0xa4b/0x19b0 [i915]
[ 1.242159] [<ffffffffa0587f22>] ? i915_driver_load+0xe82/0x1640 [i915]
[ 1.242169] [<ffffffffa03a391c>] ? drm_dev_register+0x9c/0xb0 [drm]
[ 1.242176] [<ffffffffa03a5c69>] ? drm_get_pci_dev+0x89/0x1e0 [drm]
[ 1.242184] [<ffffffff812fa34f>] ? local_pci_probe+0x3f/0xa0
[ 1.242190] [<ffffffff812fb738>] ? pci_device_probe+0xd8/0x120
[ 1.242198] [<ffffffff813cc554>] ? driver_probe_device+0x214/0x490
[ 1.242205] [<ffffffff813cc84b>] ? __driver_attach+0x7b/0x80
[ 1.242213] [<ffffffff813cc7d0>] ? driver_probe_device+0x490/0x490
[ 1.242220] [<ffffffff813ca3ca>] ? bus_for_each_dev+0x5a/0x90
[ 1.242227] [<ffffffff813cba95>] ? bus_add_driver+0x1e5/0x280
[ 1.242234] [<ffffffffa05e3000>] ? 0xffffffffa05e3000
[ 1.242241] [<ffffffff813cd137>] ? driver_register+0x57/0xd0
[ 1.242249] [<ffffffff8100213e>] ? do_one_initcall+0xce/0x1f0
[ 1.242257] [<ffffffff81147b60>] ? do_init_module+0x5a/0x1e0
[ 1.242264] [<ffffffff810e48c6>] ? load_module+0x2166/0x2610
[ 1.242268] [<ffffffff810e0b10>] ? __symbol_put+0x30/0x30
[ 1.242273] [<ffffffff810e4f26>] ? SyS_finit_module+0x76/0xa0
[ 1.242278] [<ffffffff8152fbf6>] ? entry_SYSCALL_64_fastpath+0x16/0x75
[ 1.242282] Code: c2 c1 f8 03 31 d2 84 c9 74 26 41 80 bd 80 00 00 00 00 74 1c 41 8b 4d 68 41 2b 4d 60 0f b6 c0 c1 e6 06 31 d2 0f af c8 8d 44 31 ff <f7> f1 8d 50 02 89 53 10 c6 03 01 48 83 c4 28 5b 5d 41 5c 41 5d
[ 1.242316] RIP [<ffffffffa04e591a>] ilk_compute_wm_level.isra.29+0x14a/0x2c0 [i915]
[ 1.242350] RSP <ffff8802145b36f8>
[ 1.242363] ---[ end trace 82dc4436b00d09dc ]---
[ 1.242472] snd_hda_intel 0000:00:03.0: failed to add i915 component master (-19)
[ 1.244231] Adding 8262652k swap on /dev/sda3. Priority:-1 extents:1 across:8262652k SSFS
[ 1.246076] iTCO_vendor_support: vendor-support=0
[ 1.246473] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.246522] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.246643] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.264569] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1.268017] hid-generic 0003:046D:C52A.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:14.0-2/input0
[ 1.272299] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 1.273205] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 1.273302] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 1.275968] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52A.0003/input/input13
[ 1.284598] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 1.291693] tsc: Refined TSC clocksource calibration: 2095.149 MHz
[ 1.291703] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3349f83e9, max_idle_ns: 440795233330 ns
[ 1.327802] intel_rapl: Found RAPL domain package
[ 1.327814] intel_rapl: Found RAPL domain core
[ 1.327821] intel_rapl: Found RAPL domain uncore
[ 1.327827] intel_rapl: Found RAPL domain dram
[ 1.332022] hid-generic 0003:046D:C52A.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:14.0-2/input1
[ 1.389808] RPC: Registered named UNIX socket transport module.
[ 1.389814] RPC: Registered udp transport module.
[ 1.389817] RPC: Registered tcp transport module.
[ 1.389820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.392181] FS-Cache: Loaded
[ 1.397132] FS-Cache: Netfs 'nfs' registered for caching
[ 1.402597] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.443771] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 1.515720] cfg80211: World regulatory domain updated:
[ 1.515730] cfg80211: DFS Master region: unset
[ 1.515733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1.515745] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515754] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515772] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1.515825] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1.515833] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1.515839] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515846] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1.573063] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.573070] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.588528] Bluetooth: Core ver 2.20
[ 1.588551] NET: Registered protocol family 31
[ 1.588556] Bluetooth: HCI device and connection manager initialized
[ 1.588563] Bluetooth: HCI socket layer initialized
[ 1.588568] Bluetooth: L2CAP socket layer initialized
[ 1.588578] Bluetooth: SCO socket layer initialized
[ 1.591790] usbcore: registered new interface driver btusb
[ 1.608657] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1.608908] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 1.608914] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2)
[ 1.608924] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 1.608929] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[ 1.668953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.668960] Bluetooth: BNEP filters: protocol multicast
[ 1.668965] Bluetooth: BNEP socket layer initialized
[ 2.292348] clocksource: Switched to clocksource tsc
[ 4.627274] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.646272] random: nonblocking pool is initialized
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-10-06 14:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 22:53 [PATCH 00/15] Atomic watermark updates (v5) Matt Roper
2015-09-24 22:53 ` [PATCH 01/15] drm/i915: Drop redundant watermark programming Matt Roper
2015-09-24 22:53 ` [PATCH 02/15] drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2) Matt Roper
2016-01-05 12:49 ` Flicker caused by "drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)" Jan Niehusmann
2016-01-05 21:58 ` Matt Roper
2016-01-06 0:46 ` Jan Niehusmann
2015-09-24 22:53 ` [PATCH 03/15] drm/i915: Eliminate usage of pipe_wm_parameters from ILK-style WM (v2) Matt Roper
2015-09-24 22:53 ` [PATCH 04/15] drm/i915: Determine I915_MAX_PLANES from plane enum Matt Roper
2015-09-24 22:53 ` [PATCH 05/15] drm/i915/skl: Simplify wm structures slightly (v2) Matt Roper
2015-09-30 15:13 ` Daniel Vetter
2015-09-24 22:53 ` [PATCH 06/15] drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 07/15] drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to atomic check Matt Roper
2015-09-24 22:53 ` [PATCH 08/15] drm/i915: Drop intel_update_sprite_watermarks Matt Roper
2015-09-24 22:53 ` [PATCH 09/15] drm/i915: Refactor ilk_update_wm (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 10/15] drm/i915: Calculate pipe watermarks into CRTC state (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 11/15] drm/i915: Calculate ILK-style watermarks during atomic check (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 12/15] drm/i915: Don't set plane visible during HW readout if CRTC is off Matt Roper
2015-09-24 22:53 ` [PATCH 13/15] drm/i915: Calculate watermark configuration during atomic check (v2) Matt Roper
2015-09-24 22:53 ` [PATCH 14/15] drm/i915: Sanitize watermarks after hardware state readout Matt Roper
2015-10-01 13:58 ` Jani Nikula
2015-10-01 16:12 ` Daniel Vetter
2015-10-01 16:53 ` [PATCH] drm/i915: Convert hsw_compute_linetime_wm to use in-flight state Matt Roper
2015-10-06 14:34 ` Jani Nikula [this message]
2015-09-24 22:53 ` [PATCH 15/15] drm/i915: Add two-stage ILK-style watermark programming (v5) Matt Roper
2015-09-30 15:20 ` [PATCH 00/15] Atomic watermark updates (v5) Daniel Vetter
2015-09-30 22:21 ` Zanoni, Paulo R
2015-10-01 23:03 ` [PATCH] fixup! drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) Matt Roper
2015-10-02 18:43 ` Zanoni, Paulo R
2015-10-06 10:13 ` [PATCH] fixup! drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) [regression] Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87twq483rl.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).