* v3.17-rc4+: DRM warning @ 2014-09-12 7:49 Chris Clayton 2014-09-12 8:51 ` Daniel Vetter 0 siblings, 1 reply; 6+ messages in thread From: Chris Clayton @ 2014-09-12 7:49 UTC (permalink / raw) To: intel-gfx [-- Attachment #1: Type: text/plain, Size: 5162 bytes --] Hi, Firstly, please cc me on any reply because I'm not subscribed to LKML. I've just built and installed the current development kernel (v3.17-rc4-222-gc73f6fd)on a desktop machine and I'm getting a warning that I haven't seen before. A full dmesg is attached, but the warning is: [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) [ 23.131727] ------------[ cut here ]------------ [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() [ 23.131770] pipe state doesn't match! [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+) ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322 [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708 [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018 [ 23.131786] Call Trace: [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915] [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915] [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0 [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915] [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915] [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915] [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50 [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370 [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60 [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400 [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20 [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40 [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0 [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000 [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e [ 23.132038] ---[ end trace e6521cda3000b0ed ]--- [ 23.132047] Console: switching to colour frame buffer device 240x67 [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 23.165971] i915 0000:00:02.0: registered panic notifier [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 I don't see this warning on my laptop, which also has intel-based graphics, so I guess it's related to the specific hardware on the desktop machine. Please let me know if I can help diagnose this warning or test any fix. Chris [-- Attachment #2: drm_warning.dmesg.txt --] [-- Type: text/plain, Size: 48878 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.17.0-rc4+ (chris@upstairs) (gcc version 4.9.2 20140910 (prerelease) (GCC) ) #322 SMP PREEMPT Fri Sep 12 07:43:31 BST 2014 [ 0.000000] Command line: root=/dev/sda2 ro resume=/dev/sda11 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdcdffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdce0000-0x00000000bdce2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdce3000-0x00000000bdceffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdcf0000-0x00000000bdcfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 4 base 100000000 mask F00000000 write-back [ 0.000000] 5 base 200000000 mask FC0000000 write-back [ 0.000000] 6 base 0BDD00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC [ 0.000000] reg 2, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB [ 0.000000] reg 6, base: 3037MB, range: 1MB, type UC [ 0.000000] total RAM covered: 8157M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3037MB, range: 1MB, type UC [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC [ 0.000000] reg 4, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbdd00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbdce0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [ffff8800000f5760] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01793000, 0x01793fff] PGTABLE [ 0.000000] BRK [0x01794000, 0x01794fff] PGTABLE [ 0.000000] BRK [0x01795000, 0x01795fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M [ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdcdffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbdbfffff] page 2M [ 0.000000] [mem 0xbdc00000-0xbdcdffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01797000, 0x01797fff] PGTABLE [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000BDCE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000BDCE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000BDCE3180 003DE7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000BDCE0000 000040 [ 0.000000] ACPI: HPET 0x00000000BDCE70C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000BDCE7140 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000BDCE7180 006442 (v01 GBT GBT B0 5455312E BG?? 00020101) [ 0.000000] ACPI: APIC 0x00000000BDCE6FC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000BDCEDEF0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbdcdffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2088062 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12084 pages used for memmap [ 0.000000] DMA32 zone: 773344 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdce0000-0xbdce2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdce3000-0xbdceffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdcf0000-0xbdcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdd00000-0xbdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023fc00000 s74304 r8192 d24000 u524288 [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055413 [ 0.000000] Kernel command line: root=/dev/sda2 ro resume=/dev/sda11 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 8134384K/8352248K available (4493K kernel code, 423K rwdata, 1592K rodata, 776K init, 432K bss, 217864K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:456 0 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2499.813 MHz processor [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.62 BogoMIPS (lpj=2499813) [ 0.001080] pid_max: default: 32768 minimum: 301 [ 0.001120] ACPI: Core revision 20140724 [ 0.003575] ACPI: All ACPI Tables successfully acquired [ 0.004023] Security Framework initialized [ 0.004068] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004108] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004437] CPU: Physical Processor ID: 0 [ 0.004472] CPU: Processor Core ID: 0 [ 0.005003] mce: CPU supports 6 MCE banks [ 0.005042] CPU0: Thermal monitoring enabled (TM2) [ 0.005083] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.005222] Freeing SMP alternatives memory: 16K (ffffffff81721000 - ffffffff81725000) [ 0.005677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.015738] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (fam: 06, model: 17, stepping: 0a) [ 0.016000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.016000] ... version: 2 [ 0.016000] ... bit width: 40 [ 0.016000] ... generic registers: 2 [ 0.016000] ... value mask: 000000ffffffffff [ 0.016000] ... max period: 000000007fffffff [ 0.016000] ... fixed-purpose events: 3 [ 0.016000] ... event mask: 0000000700000003 [ 0.021058] x86: Booting SMP configuration: [ 0.021095] .... node #0, CPUs: #1 #2 #3 [ 0.061010] x86: Booted up 1 node, 4 CPUs [ 0.061092] smpboot: Total of 4 processors activated (19998.50 BogoMIPS) [ 0.062089] devtmpfs: initialized [ 0.063077] PM: Registering ACPI NVS region [mem 0xbdce0000-0xbdce2fff] (12288 bytes) [ 0.063315] NET: Registered protocol family 16 [ 0.063451] cpuidle: using governor ladder [ 0.063488] cpuidle: using governor menu [ 0.063544] ACPI: bus type PCI registered [ 0.063583] PCI: Using configuration type 1 for base access [ 0.067080] ACPI: Added _OSI(Module Device) [ 0.067116] ACPI: Added _OSI(Processor Device) [ 0.067152] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.067188] ACPI: Added _OSI(Processor Aggregator Device) [ 0.070151] ACPI: Dynamic OEM Table Load: [ 0.070228] ACPI: SSDT 0xFFFF880236A06800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.070528] ACPI: Dynamic OEM Table Load: [ 0.070600] ACPI: SSDT 0xFFFF880236A0B000 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.071021] ACPI: Dynamic OEM Table Load: [ 0.071092] ACPI: SSDT 0xFFFF880236A0B200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.071377] ACPI: Dynamic OEM Table Load: [ 0.071449] ACPI: SSDT 0xFFFF880236A0B400 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.071761] ACPI: Interpreter enabled [ 0.071799] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.071891] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.071991] ACPI: (supports S0 S3 S4 S5) [ 0.072001] ACPI: Using IOAPIC for interrupt routing [ 0.072056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.074819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.074861] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments] [ 0.074903] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.075021] PCI host bridge to bus 0000:00 [ 0.075057] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.075095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.075134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.075173] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.075224] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.075264] pci_bus 0000:00: root bus resource [mem 0xbdd00000-0xfebfffff] [ 0.075321] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 [ 0.075396] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 [ 0.075407] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] [ 0.075412] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.075417] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe007] [ 0.075486] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 [ 0.075494] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit] [ 0.075591] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.075603] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit] [ 0.075648] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.075685] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.075755] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.075799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.075837] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.075907] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.075951] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.075988] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.076036] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.076069] pci 0000:00:1d.0: reg 0x20: [io 0xe100-0xe11f] [ 0.076116] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.076184] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.076221] pci 0000:00:1d.1: reg 0x20: [io 0xe200-0xe21f] [ 0.076272] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.076340] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.076373] pci 0000:00:1d.2: reg 0x20: [io 0xe300-0xe31f] [ 0.076419] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.076487] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.076520] pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f] [ 0.076566] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.076638] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.076653] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff] [ 0.076738] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.076807] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.076872] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.076944] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.077041] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.077105] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.077148] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.077190] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.077320] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a [ 0.077331] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.077338] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.077344] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.077351] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.077357] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] [ 0.077371] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.077411] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.077451] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.077492] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.078011] pci 0000:00:1f.2: PME# supported from D3hot [ 0.078073] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.078117] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.078231] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.078337] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.078350] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.078376] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref] [ 0.078392] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref] [ 0.078403] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.078437] pci 0000:02:00.0: supports D1 D2 [ 0.078439] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080016] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.080057] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.080061] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.080066] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.080108] pci 0000:03:01.0: [1131:7133] type 00 class 0x048000 [ 0.080124] pci 0000:03:01.0: reg 0x10: [mem 0xe1605000-0xe16057ff] [ 0.080185] pci 0000:03:01.0: supports D1 D2 [ 0.080237] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.080252] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff] [ 0.080261] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff] [ 0.080323] pci 0000:03:07.0: supports D1 D2 [ 0.080325] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.080385] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.080429] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.080433] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.080435] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.080437] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.080438] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.080440] pci 0000:00:1e.0: bridge window [mem 0xbdd00000-0xfebfffff] (subtractive decode) [ 0.080454] pci_bus 0000:00: on NUMA node 0 [ 0.080796] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.081090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.081414] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.081717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.082038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082397] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082737] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.083072] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.083428] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.083553] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.083553] vgaarb: loaded [ 0.083553] vgaarb: bridge control possible 0000:00:02.0 [ 0.083553] SCSI subsystem initialized [ 0.083553] libata version 3.00 loaded. [ 0.083553] ACPI: bus type USB registered [ 0.083553] usbcore: registered new interface driver usbfs [ 0.083553] usbcore: registered new interface driver hub [ 0.084024] usbcore: registered new device driver usb [ 0.084108] Advanced Linux Sound Architecture Driver Initialized. [ 0.084166] PCI: Using ACPI for IRQ routing [ 0.084201] PCI: pci_cache_line_size set to 64 bytes [ 0.084248] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.084250] e820: reserve RAM buffer [mem 0xbdce0000-0xbfffffff] [ 0.084390] Switched to clocksource hpet [ 0.084501] pnp: PnP ACPI init [ 0.084624] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.084663] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.084702] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.084740] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.084779] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.084819] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084870] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.084870] pnp 00:02: [dma 2] [ 0.084870] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.084870] system 00:03: [io 0x0400-0x04cf] could not be reserved [ 0.084870] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084939] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.084980] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.085116] system 00:05: [mem 0x000cc600-0x000cffff] has been reserved [ 0.085157] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.085198] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.085238] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.085279] system 00:05: [mem 0xbdce0000-0xbdcfffff] could not be reserved [ 0.085319] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.085360] system 00:05: [mem 0x00100000-0xbdcdffff] could not be reserved [ 0.085401] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.085441] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.085481] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.085521] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.085561] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.085601] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved [ 0.085641] system 00:05: [mem 0x000e0000-0x000effff] has been reserved [ 0.085681] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.085688] pnp: PnP ACPI: found 6 devices [ 0.093806] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.093810] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.093812] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.093825] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment [ 0.093867] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.093869] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.093871] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.093875] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbdd00000-0xbdefffff] [ 0.093918] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.093961] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.094000] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.094041] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.094082] pci 0000:00:1c.0: bridge window [mem 0xbdd00000-0xbdefffff] [ 0.094123] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094169] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 0.094210] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.094247] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.094288] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.094330] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094374] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.094413] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.094458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.094460] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.094462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094463] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094465] pci_bus 0000:00: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094467] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.094468] pci_bus 0000:01: resource 1 [mem 0xbdd00000-0xbdefffff] [ 0.094470] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094471] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.094473] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff] [ 0.094475] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094476] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff] [ 0.094478] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.094479] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.094481] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094483] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094484] pci_bus 0000:03: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094505] NET: Registered protocol family 2 [ 0.094720] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.094899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.095222] TCP: Hash tables configured (established 65536 bind 65536) [ 0.095299] TCP: reno registered [ 0.095335] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095414] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095561] NET: Registered protocol family 1 [ 0.095617] pci 0000:00:02.0: Boot video device [ 0.107100] PCI: CLS 32 bytes, default 64 [ 0.107130] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.107172] software IO TLB [mem 0xb9ce0000-0xbdce0000] (64MB) mapped at [ffff8800b9ce0000-ffff8800bdcdffff] [ 0.107485] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107536] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107590] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107640] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107747] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.108028] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.110410] fuse init (API version 7.23) [ 0.110547] msgmni has been set to 15887 [ 0.111664] io scheduler noop registered [ 0.111754] io scheduler cfq registered (default) [ 0.112052] intel_idle: does not run on family 6 model 23 [ 0.112103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.112148] ACPI: Power Button [PWRB] [ 0.112237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.112278] ACPI: Power Button [PWRF] [ 0.112359] tsc: Marking TSC unstable due to TSC halts in idle [ 0.112402] ACPI: acpi_idle registered with cpuidle [ 0.117586] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117885] Linux agpgart interface v0.103 [ 0.117970] agpgart-intel 0000:00:00.0: Intel G41 Chipset [ 0.118035] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.118599] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.118773] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.118859] [drm] Initialized drm 1.1.0 20060810 [ 0.118981] ata_piix 0000:00:1f.2: version 2.13 [ 0.119091] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.119736] scsi host0: ata_piix [ 0.119929] scsi host1: ata_piix [ 0.119991] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.120045] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.120122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.120191] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.120509] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000028000, 6c:f0:49:14:96:87, XID 1c4000c0 IRQ 17 [ 0.120568] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 0.120694] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.121105] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.121159] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.121366] mousedev: PS/2 mouse device common for all mice [ 0.121661] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 0.121856] usbcore: registered new interface driver usbhid [ 0.121894] usbhid: USB HID core driver [ 0.122317] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.122357] TCP: cubic registered [ 0.122401] NET: Registered protocol family 15 [ 0.122767] registered taskstats version 1 [ 0.132495] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 0.132538] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.132578] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.132616] sound hdaudioC0D2: mono: mono_out=0x0 [ 0.132653] sound hdaudioC0D2: dig-out=0x1e/0x0 [ 0.132689] sound hdaudioC0D2: inputs: [ 0.132724] sound hdaudioC0D2: Rear Mic=0x18 [ 0.132760] sound hdaudioC0D2: Front Mic=0x19 [ 0.132796] sound hdaudioC0D2: Line=0x1a [ 0.132831] sound hdaudioC0D2: CD=0x1c [ 0.132866] sound hdaudioC0D2: dig-in=0x1f [ 0.300199] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL03, max UDMA/100 [ 0.303779] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 0.303824] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 0.303866] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.303911] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133 [ 0.306175] ata2.01: configured for UDMA/100 [ 0.307790] ata1.00: configured for UDMA/133 [ 0.345120] ata1.01: configured for UDMA/133 [ 0.350959] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 [ 0.351160] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.351199] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.360076] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5 [ 0.360105] sd 0:0:0:0: [sda] Write Protect is off [ 0.360108] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.360140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.421356] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.421414] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.421569] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.421615] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.425119] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL03 PQ: 0 ANSI: 5 [ 0.454829] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.455076] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.455146] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 0.544967] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 0.545605] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.545844] ALSA device list: [ 0.545879] #0: HDA Intel at 0xe1700000 irq 16 [ 0.589587] EXT3-fs (sda2): recovery required on readonly filesystem [ 0.589628] EXT3-fs (sda2): write access will be enabled during recovery [ 0.968492] random: nonblocking pool is initialized [ 20.504142] kjournald starting. Commit interval 5 seconds [ 20.526555] EXT3-fs (sda2): recovery complete [ 20.526593] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 20.526647] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 20.535905] devtmpfs: mounted [ 20.536611] Freeing unused kernel memory: 776K (ffffffff8165f000 - ffffffff81721000) [ 21.549563] EXT3-fs (sda2): using internal journal [ 22.074116] udevd[101]: starting version 182 [ 22.604377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.719468] Linux video capture interface: v2.00 [ 22.818508] ehci-pci: EHCI PCI platform driver [ 22.818714] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 22.818777] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 22.822726] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 22.822742] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000 [ 22.828015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 22.828112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.828153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.828194] usb usb1: Product: EHCI Host Controller [ 22.828232] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd [ 22.828277] usb usb1: SerialNumber: 0000:00:1d.7 [ 22.828589] hub 1-0:1.0: USB hub found [ 22.828646] hub 1-0:1.0: 8 ports detected [ 23.002973] [drm] Memory usable by graphics device = 2048M [ 23.003047] [drm] Replacing VGA console driver [ 23.003564] Console: switching to colour dummy device 80x25 [ 23.009059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 23.009064] [drm] Driver supports precise vblank timestamp query. [ 23.009129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 23.029906] uhci_hcd: USB Universal Host Controller Interface driver [ 23.088048] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 23.111418] fbcon: inteldrmfb (fb0) is primary device [ 23.130029] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) [ 23.131727] ------------[ cut here ]------------ [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() [ 23.131770] pipe state doesn't match! [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+) ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322 [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708 [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018 [ 23.131786] Call Trace: [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915] [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915] [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0 [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915] [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915] [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915] [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50 [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370 [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60 [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400 [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20 [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40 [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0 [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000 [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e [ 23.132038] ---[ end trace e6521cda3000b0ed ]--- [ 23.132047] Console: switching to colour frame buffer device 240x67 [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 23.165971] i915 0000:00:02.0: registered panic notifier [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 23.173564] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.175197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 23.176624] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 23.177963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.179238] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.180480] usb usb2: Product: UHCI Host Controller [ 23.181873] usb usb2: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 23.183202] usb usb2: SerialNumber: 0000:00:1d.0 [ 23.183875] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 23.183985] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1605000 [ 23.183989] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] [ 23.184030] saa7133[0]: board init: gpio is 600c000 [ 23.189159] hub 2-0:1.0: USB hub found [ 23.190284] hub 2-0:1.0: 2 ports detected [ 23.191571] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.192671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 23.193809] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 23.194969] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.196097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.197189] usb usb3: Product: UHCI Host Controller [ 23.198252] usb usb3: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 23.199367] usb usb3: SerialNumber: 0000:00:1d.1 [ 23.203809] hub 3-0:1.0: USB hub found [ 23.204913] hub 3-0:1.0: 2 ports detected [ 23.206150] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.207228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 23.208300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 23.209370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.210409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.211449] usb usb4: Product: UHCI Host Controller [ 23.212496] usb usb4: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 23.213542] usb usb4: SerialNumber: 0000:00:1d.2 [ 23.214684] hub 4-0:1.0: USB hub found [ 23.215723] hub 4-0:1.0: 2 ports detected [ 23.216869] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 23.217907] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 23.218985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 23.220051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.221083] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.222121] usb usb5: Product: UHCI Host Controller [ 23.223158] usb usb5: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 23.224182] usb usb5: SerialNumber: 0000:00:1d.3 [ 23.225298] hub 5-0:1.0: USB hub found [ 23.226347] hub 5-0:1.0: 2 ports detected [ 23.247965] usb 1-2: New USB device found, idVendor=05e3, idProduct=070e [ 23.249047] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 23.250149] usb 1-2: Product: USB Storage [ 23.251242] usb 1-2: SerialNumber: 000000009317 [ 23.287148] saa7133[0]: i2c eeprom read error (err=-5) [ 23.589107] firewire_core 0000:03:07.0: created device fw0: GUID 00201c56006cf049, S400 [ 23.682016] tuner 9-004b: Tuner -1 found with type(s) Radio TV. [ 23.718013] tda829x 9-004b: setting tuner address to 61 [ 23.866037] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 24.032049] usb 5-1: New USB device found, idVendor=046d, idProduct=c517 [ 24.033200] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 24.034326] usb 5-1: Product: USB Receiver [ 24.035426] usb 5-1: Manufacturer: Logitech [ 24.053352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5 [ 24.054570] logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0 [ 24.088080] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 24.089874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6 [ 24.091169] logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1 [ 24.179012] tda829x 9-004b: type set to tda8290+75a [ 24.700029] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 25.065047] usb 5-2: New USB device found, idVendor=1130, idProduct=1620 [ 25.066319] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 25.067555] usb 5-2: Product: USB AUDIO [ 25.075102] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:1130:1620.0003/input/input7 [ 25.076471] hid-generic 0003:1130:1620.0003: input: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.3-2/input2 [ 25.221055] usb 5-2: Warning! Unlikely big volume range (=17152), cval->res is probably wrong. [ 25.222409] usb 5-2: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1 [ 25.224044] usbcore: registered new interface driver snd-usb-audio [ 25.224335] usb-storage 1-2:1.0: USB Mass Storage device detected [ 25.224460] scsi host2: usb-storage 1-2:1.0 [ 25.224547] usbcore: registered new interface driver usb-storage [ 26.227231] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 26.228761] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 26.231845] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 26.233354] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 26.237088] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 26.238606] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 26.242842] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 26.244394] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 26.251462] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 26.255845] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 26.258836] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 26.260707] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 27.161014] IR keymap rc-pinnacle-color not found [ 27.162371] Registered IR keymap rc-empty [ 27.163735] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input8 [ 27.165248] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0 [ 27.166597] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-9/9-0047/ir0 [saa7133[0]] [ 27.201082] saa7133[0]: registered device video0 [v4l2] [ 27.202512] saa7133[0]: registered device vbi0 [ 27.203876] saa7133[0]: registered device radio0 [ 27.244494] dvb_init() allocating 1 frontend [ 27.282022] DVB: registering new adapter (saa7133[0]) [ 27.283403] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 27.310010] tda1004x: setting up plls for 48MHz sampling clock [ 27.472009] tda1004x: found firmware revision 20 -- ok [ 27.651760] saa7134 ALSA driver for DMA sound loaded [ 27.653194] saa7133[0]/alsa: saa7133[0] at 0xe1605000 irq 19 registered as card -1 [ 30.518476] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 30.519470] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 30.526803] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 30.527799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 30.534924] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 30.535003] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 [ 30.543181] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 30.544011] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 [ 31.268683] kjournald starting. Commit interval 5 seconds [ 31.268703] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 31.268955] EXT3-fs (sda5): using internal journal [ 31.268957] EXT3-fs (sda5): recovery complete [ 31.268958] EXT3-fs (sda5): mounted filesystem with writeback data mode [ 34.117149] kjournald starting. Commit interval 5 seconds [ 34.117182] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended [ 34.117416] EXT3-fs (sda9): using internal journal [ 34.162366] EXT3-fs (sda9): recovery complete [ 34.163775] EXT3-fs (sda9): mounted filesystem with writeback data mode [ 43.494077] kjournald starting. Commit interval 5 seconds [ 43.494103] EXT3-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended [ 43.496954] EXT3-fs (sda10): using internal journal [ 43.541335] EXT3-fs (sda10): recovery complete [ 43.542775] EXT3-fs (sda10): mounted filesystem with writeback data mode [ 43.610520] Adding 7815584k swap on /dev/sda11. Priority:-1 extents:1 across:7815584k [ 44.343311] r8169 0000:02:00.0 eth0: link down [ 44.343330] r8169 0000:02:00.0 eth0: link down [ 46.039133] r8169 0000:02:00.0 eth0: link up [ 47.104089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [-- Attachment #3: Type: text/plain, Size: 159 bytes --] _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v3.17-rc4+: DRM warning 2014-09-12 7:49 v3.17-rc4+: DRM warning Chris Clayton @ 2014-09-12 8:51 ` Daniel Vetter 2014-09-12 9:24 ` Chris Clayton 0 siblings, 1 reply; 6+ messages in thread From: Daniel Vetter @ 2014-09-12 8:51 UTC (permalink / raw) To: Chris Clayton; +Cc: intel-gfx On Fri, Sep 12, 2014 at 08:49:48AM +0100, Chris Clayton wrote: > Hi, > > Firstly, please cc me on any reply because I'm not subscribed to LKML. > > I've just built and installed the current development kernel (v3.17-rc4-222-gc73f6fd)on a desktop machine and I'm > getting a warning that I haven't seen before. A full dmesg is attached, but the warning is: Please boot with drm.debug=0xe, reproduce the issue and attach the complete dmesg (from boot-up to the backtrace). Thanks, Daniel > > [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) > [ 23.131727] ------------[ cut here ]------------ > [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() > [ 23.131770] pipe state doesn't match! > [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+) > ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper > [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322 > [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 > [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d > [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708 > [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018 > [ 23.131786] Call Trace: > [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a > [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 > [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 > [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915] > [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] > [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915] > [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] > [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0 > [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 > [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 > [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] > [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] > [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] > [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915] > [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 > [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 > [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 > [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 > [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 > [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 > [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 > [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 > [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] > [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915] > [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915] > [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50 > [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370 > [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60 > [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400 > [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20 > [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40 > [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0 > [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 > [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 > [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 > [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 > [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 > [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 > [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 > [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 > [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000 > [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 > [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 > [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 > [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 > [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 > [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e > [ 23.132038] ---[ end trace e6521cda3000b0ed ]--- > [ 23.132047] Console: switching to colour frame buffer device 240x67 > [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 23.165971] i915 0000:00:02.0: registered panic notifier > [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 > > I don't see this warning on my laptop, which also has intel-based graphics, so I guess it's related to the specific > hardware on the desktop machine. > > Please let me know if I can help diagnose this warning or test any fix. > > Chris > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.17.0-rc4+ (chris@upstairs) (gcc version 4.9.2 20140910 (prerelease) (GCC) ) #322 SMP PREEMPT Fri Sep 12 07:43:31 BST 2014 > [ 0.000000] Command line: root=/dev/sda2 ro resume=/dev/sda11 > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdcdffff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000bdce0000-0x00000000bdce2fff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x00000000bdce3000-0x00000000bdceffff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000bdcf0000-0x00000000bdcfffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.4 present. > [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CBFFF write-protect > [ 0.000000] CC000-EFFFF uncachable > [ 0.000000] F0000-FFFFF write-through > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F00000000 write-back > [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable > [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable > [ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable > [ 0.000000] 4 base 100000000 mask F00000000 write-back > [ 0.000000] 5 base 200000000 mask FC0000000 write-back > [ 0.000000] 6 base 0BDD00000 mask FFFF00000 uncachable > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] original variable MTRRs > [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB > [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC > [ 0.000000] reg 2, base: 3040MB, range: 32MB, type UC > [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC > [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB > [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB > [ 0.000000] reg 6, base: 3037MB, range: 1MB, type UC > [ 0.000000] total RAM covered: 8157M > [ 0.000000] Found optimal setting for mtrr clean up > [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G > [ 0.000000] New variable MTRRs > [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB > [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB > [ 0.000000] reg 2, base: 3037MB, range: 1MB, type UC > [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC > [ 0.000000] reg 4, base: 3040MB, range: 32MB, type UC > [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB > [ 0.000000] reg 6, base: 8GB, range: 1GB, type WB > [ 0.000000] e820: update [mem 0xbdd00000-0xffffffff] usable ==> reserved > [ 0.000000] e820: last_pfn = 0xbdce0 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [ffff8800000f5760] > [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x01793000, 0x01793fff] PGTABLE > [ 0.000000] BRK [0x01794000, 0x01794fff] PGTABLE > [ 0.000000] BRK [0x01795000, 0x01795fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] > [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M > [ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] > [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] > [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M > [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdcdffff] > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k > [ 0.000000] [mem 0x00200000-0xbdbfffff] page 2M > [ 0.000000] [mem 0xbdc00000-0xbdcdffff] page 4k > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] > [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M > [ 0.000000] BRK [0x01797000, 0x01797fff] PGTABLE > [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT ) > [ 0.000000] ACPI: RSDT 0x00000000BDCE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > [ 0.000000] ACPI: FACP 0x00000000BDCE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > [ 0.000000] ACPI: DSDT 0x00000000BDCE3180 003DE7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) > [ 0.000000] ACPI: FACS 0x00000000BDCE0000 000040 > [ 0.000000] ACPI: HPET 0x00000000BDCE70C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) > [ 0.000000] ACPI: MCFG 0x00000000BDCE7140 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > [ 0.000000] ACPI: TAMG 0x00000000BDCE7180 006442 (v01 GBT GBT B0 5455312E BG?? 00020101) > [ 0.000000] ACPI: APIC 0x00000000BDCE6FC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > [ 0.000000] ACPI: SSDT 0x00000000BDCEDEF0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x23fffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x0009efff] > [ 0.000000] node 0: [mem 0x00100000-0xbdcdffff] > [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] > [ 0.000000] On node 0 totalpages: 2088062 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 12084 pages used for memmap > [ 0.000000] DMA32 zone: 773344 pages, LIFO batch:31 > [ 0.000000] Normal zone: 20480 pages used for memmap > [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 > [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbdce0000-0xbdce2fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbdce3000-0xbdceffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbdcf0000-0xbdcfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbdd00000-0xbdffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xcfffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] > [ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices > [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023fc00000 s74304 r8192 d24000 u524288 > [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055413 > [ 0.000000] Kernel command line: root=/dev/sda2 ro resume=/dev/sda11 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form > [ 0.000000] AGP: Checking aperture... > [ 0.000000] AGP: No AGP bridge found > [ 0.000000] Memory: 8134384K/8352248K available (4493K kernel code, 423K rwdata, 1592K rodata, 776K init, 432K bss, 217864K reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 > [ 0.000000] NR_IRQS:4352 nr_irqs:456 0 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 2499.813 MHz processor > [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.62 BogoMIPS (lpj=2499813) > [ 0.001080] pid_max: default: 32768 minimum: 301 > [ 0.001120] ACPI: Core revision 20140724 > [ 0.003575] ACPI: All ACPI Tables successfully acquired > [ 0.004023] Security Framework initialized > [ 0.004068] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.004108] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.004437] CPU: Physical Processor ID: 0 > [ 0.004472] CPU: Processor Core ID: 0 > [ 0.005003] mce: CPU supports 6 MCE banks > [ 0.005042] CPU0: Thermal monitoring enabled (TM2) > [ 0.005083] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 > Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 > [ 0.005222] Freeing SMP alternatives memory: 16K (ffffffff81721000 - ffffffff81725000) > [ 0.005677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.015738] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (fam: 06, model: 17, stepping: 0a) > [ 0.016000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. > [ 0.016000] ... version: 2 > [ 0.016000] ... bit width: 40 > [ 0.016000] ... generic registers: 2 > [ 0.016000] ... value mask: 000000ffffffffff > [ 0.016000] ... max period: 000000007fffffff > [ 0.016000] ... fixed-purpose events: 3 > [ 0.016000] ... event mask: 0000000700000003 > [ 0.021058] x86: Booting SMP configuration: > [ 0.021095] .... node #0, CPUs: #1 #2 #3 > [ 0.061010] x86: Booted up 1 node, 4 CPUs > [ 0.061092] smpboot: Total of 4 processors activated (19998.50 BogoMIPS) > [ 0.062089] devtmpfs: initialized > [ 0.063077] PM: Registering ACPI NVS region [mem 0xbdce0000-0xbdce2fff] (12288 bytes) > [ 0.063315] NET: Registered protocol family 16 > [ 0.063451] cpuidle: using governor ladder > [ 0.063488] cpuidle: using governor menu > [ 0.063544] ACPI: bus type PCI registered > [ 0.063583] PCI: Using configuration type 1 for base access > [ 0.067080] ACPI: Added _OSI(Module Device) > [ 0.067116] ACPI: Added _OSI(Processor Device) > [ 0.067152] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.067188] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.070151] ACPI: Dynamic OEM Table Load: > [ 0.070228] ACPI: SSDT 0xFFFF880236A06800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) > [ 0.070528] ACPI: Dynamic OEM Table Load: > [ 0.070600] ACPI: SSDT 0xFFFF880236A0B000 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) > [ 0.071021] ACPI: Dynamic OEM Table Load: > [ 0.071092] ACPI: SSDT 0xFFFF880236A0B200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) > [ 0.071377] ACPI: Dynamic OEM Table Load: > [ 0.071449] ACPI: SSDT 0xFFFF880236A0B400 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) > [ 0.071761] ACPI: Interpreter enabled > [ 0.071799] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) > [ 0.071891] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) > [ 0.071991] ACPI: (supports S0 S3 S4 S5) > [ 0.072001] ACPI: Using IOAPIC for interrupt routing > [ 0.072056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.074819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.074861] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments] > [ 0.074903] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM > [ 0.075021] PCI host bridge to bus 0000:00 > [ 0.075057] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.075095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.075134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.075173] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.075224] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] > [ 0.075264] pci_bus 0000:00: root bus resource [mem 0xbdd00000-0xfebfffff] > [ 0.075321] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 > [ 0.075396] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 > [ 0.075407] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] > [ 0.075412] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] > [ 0.075417] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe007] > [ 0.075486] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 > [ 0.075494] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit] > [ 0.075591] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 > [ 0.075603] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit] > [ 0.075648] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.075685] pci 0000:00:1b.0: System wakeup disabled by ACPI > [ 0.075755] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 > [ 0.075799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.075837] pci 0000:00:1c.0: System wakeup disabled by ACPI > [ 0.075907] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 > [ 0.075951] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.075988] pci 0000:00:1c.1: System wakeup disabled by ACPI > [ 0.076036] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 > [ 0.076069] pci 0000:00:1d.0: reg 0x20: [io 0xe100-0xe11f] > [ 0.076116] pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 0.076184] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 > [ 0.076221] pci 0000:00:1d.1: reg 0x20: [io 0xe200-0xe21f] > [ 0.076272] pci 0000:00:1d.1: System wakeup disabled by ACPI > [ 0.076340] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 > [ 0.076373] pci 0000:00:1d.2: reg 0x20: [io 0xe300-0xe31f] > [ 0.076419] pci 0000:00:1d.2: System wakeup disabled by ACPI > [ 0.076487] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 > [ 0.076520] pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f] > [ 0.076566] pci 0000:00:1d.3: System wakeup disabled by ACPI > [ 0.076638] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 > [ 0.076653] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff] > [ 0.076738] pci 0000:00:1d.7: System wakeup disabled by ACPI > [ 0.076807] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 > [ 0.076872] pci 0000:00:1e.0: System wakeup disabled by ACPI > [ 0.076944] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 > [ 0.077041] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] > [ 0.077105] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO > [ 0.077148] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) > [ 0.077190] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) > [ 0.077320] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a > [ 0.077331] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] > [ 0.077338] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] > [ 0.077344] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] > [ 0.077351] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] > [ 0.077357] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] > [ 0.077371] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] > [ 0.077411] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] > [ 0.077451] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] > [ 0.077492] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] > [ 0.078011] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.078073] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 > [ 0.078117] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] > [ 0.078231] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.078337] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.078350] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] > [ 0.078376] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref] > [ 0.078392] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref] > [ 0.078403] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] > [ 0.078437] pci 0000:02:00.0: supports D1 D2 > [ 0.078439] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.080016] pci 0000:00:1c.1: PCI bridge to [bus 02] > [ 0.080057] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] > [ 0.080061] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] > [ 0.080066] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] > [ 0.080108] pci 0000:03:01.0: [1131:7133] type 00 class 0x048000 > [ 0.080124] pci 0000:03:01.0: reg 0x10: [mem 0xe1605000-0xe16057ff] > [ 0.080185] pci 0000:03:01.0: supports D1 D2 > [ 0.080237] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 > [ 0.080252] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff] > [ 0.080261] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff] > [ 0.080323] pci 0000:03:07.0: supports D1 D2 > [ 0.080325] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot > [ 0.080385] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) > [ 0.080429] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] > [ 0.080433] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > [ 0.080435] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > [ 0.080437] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > [ 0.080438] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) > [ 0.080440] pci 0000:00:1e.0: bridge window [mem 0xbdd00000-0xfebfffff] (subtractive decode) > [ 0.080454] pci_bus 0000:00: on NUMA node 0 > [ 0.080796] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > [ 0.081090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > [ 0.081414] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) > [ 0.081717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > [ 0.082038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > [ 0.082397] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > [ 0.082737] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > [ 0.083072] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) > [ 0.083428] ACPI: Enabled 2 GPEs in block 00 to 1F > [ 0.083553] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.083553] vgaarb: loaded > [ 0.083553] vgaarb: bridge control possible 0000:00:02.0 > [ 0.083553] SCSI subsystem initialized > [ 0.083553] libata version 3.00 loaded. > [ 0.083553] ACPI: bus type USB registered > [ 0.083553] usbcore: registered new interface driver usbfs > [ 0.083553] usbcore: registered new interface driver hub > [ 0.084024] usbcore: registered new device driver usb > [ 0.084108] Advanced Linux Sound Architecture Driver Initialized. > [ 0.084166] PCI: Using ACPI for IRQ routing > [ 0.084201] PCI: pci_cache_line_size set to 64 bytes > [ 0.084248] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] > [ 0.084250] e820: reserve RAM buffer [mem 0xbdce0000-0xbfffffff] > [ 0.084390] Switched to clocksource hpet > [ 0.084501] pnp: PnP ACPI init > [ 0.084624] system 00:00: [io 0x04d0-0x04d1] has been reserved > [ 0.084663] system 00:00: [io 0x0290-0x029f] has been reserved > [ 0.084702] system 00:00: [io 0x0800-0x087f] has been reserved > [ 0.084740] system 00:00: [io 0x0290-0x0294] has been reserved > [ 0.084779] system 00:00: [io 0x0880-0x088f] has been reserved > [ 0.084819] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.084870] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.084870] pnp 00:02: [dma 2] > [ 0.084870] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) > [ 0.084870] system 00:03: [io 0x0400-0x04cf] could not be reserved > [ 0.084870] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.084939] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved > [ 0.084980] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.085116] system 00:05: [mem 0x000cc600-0x000cffff] has been reserved > [ 0.085157] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved > [ 0.085198] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved > [ 0.085238] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved > [ 0.085279] system 00:05: [mem 0xbdce0000-0xbdcfffff] could not be reserved > [ 0.085319] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.085360] system 00:05: [mem 0x00100000-0xbdcdffff] could not be reserved > [ 0.085401] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.085441] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved > [ 0.085481] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved > [ 0.085521] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.085561] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved > [ 0.085601] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved > [ 0.085641] system 00:05: [mem 0x000e0000-0x000effff] has been reserved > [ 0.085681] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.085688] pnp: PnP ACPI: found 6 devices > [ 0.093806] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 > [ 0.093810] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 > [ 0.093812] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 > [ 0.093825] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment > [ 0.093867] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 > [ 0.093869] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > [ 0.093871] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > [ 0.093875] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbdd00000-0xbdefffff] > [ 0.093918] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe1800000-0xe19fffff 64bit pref] > [ 0.093961] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > [ 0.094000] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.094041] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > [ 0.094082] pci 0000:00:1c.0: bridge window [mem 0xbdd00000-0xbdefffff] > [ 0.094123] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref] > [ 0.094169] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] > [ 0.094210] pci 0000:00:1c.1: PCI bridge to [bus 02] > [ 0.094247] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] > [ 0.094288] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] > [ 0.094330] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] > [ 0.094374] pci 0000:00:1e.0: PCI bridge to [bus 03] > [ 0.094413] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] > [ 0.094458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.094460] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.094462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.094463] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] > [ 0.094465] pci_bus 0000:00: resource 8 [mem 0xbdd00000-0xfebfffff] > [ 0.094467] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] > [ 0.094468] pci_bus 0000:01: resource 1 [mem 0xbdd00000-0xbdefffff] > [ 0.094470] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref] > [ 0.094471] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] > [ 0.094473] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff] > [ 0.094475] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref] > [ 0.094476] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff] > [ 0.094478] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] > [ 0.094479] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] > [ 0.094481] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.094483] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] > [ 0.094484] pci_bus 0000:03: resource 8 [mem 0xbdd00000-0xfebfffff] > [ 0.094505] NET: Registered protocol family 2 > [ 0.094720] TCP established hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.094899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.095222] TCP: Hash tables configured (established 65536 bind 65536) > [ 0.095299] TCP: reno registered > [ 0.095335] UDP hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.095414] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.095561] NET: Registered protocol family 1 > [ 0.095617] pci 0000:00:02.0: Boot video device > [ 0.107100] PCI: CLS 32 bytes, default 64 > [ 0.107130] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.107172] software IO TLB [mem 0xb9ce0000-0xbdce0000] (64MB) mapped at [ffff8800b9ce0000-ffff8800bdcdffff] > [ 0.107485] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 > [ 0.107536] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 > [ 0.107590] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 > [ 0.107640] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 > [ 0.107747] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba > [ 0.108028] futex hash table entries: 1024 (order: 4, 65536 bytes) > [ 0.110410] fuse init (API version 7.23) > [ 0.110547] msgmni has been set to 15887 > [ 0.111664] io scheduler noop registered > [ 0.111754] io scheduler cfq registered (default) > [ 0.112052] intel_idle: does not run on family 6 model 23 > [ 0.112103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 0.112148] ACPI: Power Button [PWRB] > [ 0.112237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.112278] ACPI: Power Button [PWRF] > [ 0.112359] tsc: Marking TSC unstable due to TSC halts in idle > [ 0.112402] ACPI: acpi_idle registered with cpuidle > [ 0.117586] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 0.117885] Linux agpgart interface v0.103 > [ 0.117970] agpgart-intel 0000:00:00.0: Intel G41 Chipset > [ 0.118035] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable > [ 0.118599] agpgart-intel 0000:00:00.0: detected 32768K stolen memory > [ 0.118773] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 0.118859] [drm] Initialized drm 1.1.0 20060810 > [ 0.118981] ata_piix 0000:00:1f.2: version 2.13 > [ 0.119091] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 0.119736] scsi host0: ata_piix > [ 0.119929] scsi host1: ata_piix > [ 0.119991] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 > [ 0.120045] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 > [ 0.120122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 0.120191] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control > [ 0.120509] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000028000, 6c:f0:49:14:96:87, XID 1c4000c0 IRQ 17 > [ 0.120568] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] > [ 0.120694] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 0.121105] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.121159] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.121366] mousedev: PS/2 mouse device common for all mice > [ 0.121661] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt > [ 0.121856] usbcore: registered new interface driver usbhid > [ 0.121894] usbhid: USB HID core driver > [ 0.122317] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 0.122357] TCP: cubic registered > [ 0.122401] NET: Registered protocol family 15 > [ 0.122767] registered taskstats version 1 > [ 0.132495] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line > [ 0.132538] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 0.132578] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > [ 0.132616] sound hdaudioC0D2: mono: mono_out=0x0 > [ 0.132653] sound hdaudioC0D2: dig-out=0x1e/0x0 > [ 0.132689] sound hdaudioC0D2: inputs: > [ 0.132724] sound hdaudioC0D2: Rear Mic=0x18 > [ 0.132760] sound hdaudioC0D2: Front Mic=0x19 > [ 0.132796] sound hdaudioC0D2: Line=0x1a > [ 0.132831] sound hdaudioC0D2: CD=0x1c > [ 0.132866] sound hdaudioC0D2: dig-in=0x1f > [ 0.300199] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL03, max UDMA/100 > [ 0.303779] ata1.00: HPA detected: current 1953523055, native 1953525168 > [ 0.303824] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 > [ 0.303866] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 0.303911] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133 > [ 0.306175] ata2.01: configured for UDMA/100 > [ 0.307790] ata1.00: configured for UDMA/133 > [ 0.345120] ata1.01: configured for UDMA/133 > [ 0.350959] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 > [ 0.351160] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) > [ 0.351199] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 0.360076] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5 > [ 0.360105] sd 0:0:0:0: [sda] Write Protect is off > [ 0.360108] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.360140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.421356] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray > [ 0.421414] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 0.421569] sr 0:0:1:0: Attached scsi CD-ROM sr0 > [ 0.421615] sr 0:0:1:0: Attached scsi generic sg1 type 5 > [ 0.425119] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL03 PQ: 0 ANSI: 5 > [ 0.454829] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > [ 0.455076] sr 1:0:1:0: Attached scsi CD-ROM sr1 > [ 0.455146] sr 1:0:1:0: Attached scsi generic sg2 type 5 > [ 0.544967] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > > [ 0.545605] sd 0:0:0:0: [sda] Attached SCSI disk > [ 0.545844] ALSA device list: > [ 0.545879] #0: HDA Intel at 0xe1700000 irq 16 > [ 0.589587] EXT3-fs (sda2): recovery required on readonly filesystem > [ 0.589628] EXT3-fs (sda2): write access will be enabled during recovery > [ 0.968492] random: nonblocking pool is initialized > [ 20.504142] kjournald starting. Commit interval 5 seconds > [ 20.526555] EXT3-fs (sda2): recovery complete > [ 20.526593] EXT3-fs (sda2): mounted filesystem with writeback data mode > [ 20.526647] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. > [ 20.535905] devtmpfs: mounted > [ 20.536611] Freeing unused kernel memory: 776K (ffffffff8165f000 - ffffffff81721000) > [ 21.549563] EXT3-fs (sda2): using internal journal > [ 22.074116] udevd[101]: starting version 182 > [ 22.604377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 22.719468] Linux video capture interface: v2.00 > [ 22.818508] ehci-pci: EHCI PCI platform driver > [ 22.818714] ehci-pci 0000:00:1d.7: EHCI Host Controller > [ 22.818777] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 > [ 22.822726] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported > [ 22.822742] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000 > [ 22.828015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 22.828112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 22.828153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 22.828194] usb usb1: Product: EHCI Host Controller > [ 22.828232] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd > [ 22.828277] usb usb1: SerialNumber: 0000:00:1d.7 > [ 22.828589] hub 1-0:1.0: USB hub found > [ 22.828646] hub 1-0:1.0: 8 ports detected > [ 23.002973] [drm] Memory usable by graphics device = 2048M > [ 23.003047] [drm] Replacing VGA console driver > [ 23.003564] Console: switching to colour dummy device 80x25 > [ 23.009059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 23.009064] [drm] Driver supports precise vblank timestamp query. > [ 23.009129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 23.029906] uhci_hcd: USB Universal Host Controller Interface driver > [ 23.088048] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 > [ 23.111418] fbcon: inteldrmfb (fb0) is primary device > [ 23.130029] usb 1-2: new high-speed USB device number 2 using ehci-pci > [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) > [ 23.131727] ------------[ cut here ]------------ > [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() > [ 23.131770] pipe state doesn't match! > [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+) ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper > [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322 > [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 > [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d > [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708 > [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018 > [ 23.131786] Call Trace: > [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a > [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 > [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 > [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915] > [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] > [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915] > [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] > [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0 > [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 > [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 > [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] > [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] > [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] > [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915] > [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 > [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 > [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 > [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 > [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 > [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 > [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 > [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 > [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] > [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915] > [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915] > [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50 > [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370 > [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60 > [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400 > [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20 > [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40 > [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0 > [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 > [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 > [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 > [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 > [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 > [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 > [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 > [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 > [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000 > [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 > [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 > [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 > [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 > [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 > [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e > [ 23.132038] ---[ end trace e6521cda3000b0ed ]--- > [ 23.132047] Console: switching to colour frame buffer device 240x67 > [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 23.165971] i915 0000:00:02.0: registered panic notifier > [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 > [ 23.173564] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 23.175197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 23.176624] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 > [ 23.177963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 23.179238] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 23.180480] usb usb2: Product: UHCI Host Controller > [ 23.181873] usb usb2: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd > [ 23.183202] usb usb2: SerialNumber: 0000:00:1d.0 > [ 23.183875] saa7130/34: v4l2 driver version 0, 2, 17 loaded > [ 23.183985] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1605000 > [ 23.183989] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] > [ 23.184030] saa7133[0]: board init: gpio is 600c000 > [ 23.189159] hub 2-0:1.0: USB hub found > [ 23.190284] hub 2-0:1.0: 2 ports detected > [ 23.191571] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 23.192671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > [ 23.193809] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 > [ 23.194969] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 23.196097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 23.197189] usb usb3: Product: UHCI Host Controller > [ 23.198252] usb usb3: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd > [ 23.199367] usb usb3: SerialNumber: 0000:00:1d.1 > [ 23.203809] hub 3-0:1.0: USB hub found > [ 23.204913] hub 3-0:1.0: 2 ports detected > [ 23.206150] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 23.207228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > [ 23.208300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 > [ 23.209370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 23.210409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 23.211449] usb usb4: Product: UHCI Host Controller > [ 23.212496] usb usb4: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd > [ 23.213542] usb usb4: SerialNumber: 0000:00:1d.2 > [ 23.214684] hub 4-0:1.0: USB hub found > [ 23.215723] hub 4-0:1.0: 2 ports detected > [ 23.216869] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 23.217907] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > [ 23.218985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 > [ 23.220051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 23.221083] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 23.222121] usb usb5: Product: UHCI Host Controller > [ 23.223158] usb usb5: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd > [ 23.224182] usb usb5: SerialNumber: 0000:00:1d.3 > [ 23.225298] hub 5-0:1.0: USB hub found > [ 23.226347] hub 5-0:1.0: 2 ports detected > [ 23.247965] usb 1-2: New USB device found, idVendor=05e3, idProduct=070e > [ 23.249047] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 > [ 23.250149] usb 1-2: Product: USB Storage > [ 23.251242] usb 1-2: SerialNumber: 000000009317 > [ 23.287148] saa7133[0]: i2c eeprom read error (err=-5) > [ 23.589107] firewire_core 0000:03:07.0: created device fw0: GUID 00201c56006cf049, S400 > [ 23.682016] tuner 9-004b: Tuner -1 found with type(s) Radio TV. > [ 23.718013] tda829x 9-004b: setting tuner address to 61 > [ 23.866037] usb 5-1: new low-speed USB device number 2 using uhci_hcd > [ 24.032049] usb 5-1: New USB device found, idVendor=046d, idProduct=c517 > [ 24.033200] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 24.034326] usb 5-1: Product: USB Receiver > [ 24.035426] usb 5-1: Manufacturer: Logitech > [ 24.053352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5 > [ 24.054570] logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0 > [ 24.088080] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor > [ 24.089874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6 > [ 24.091169] logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1 > [ 24.179012] tda829x 9-004b: type set to tda8290+75a > [ 24.700029] usb 5-2: new full-speed USB device number 3 using uhci_hcd > [ 25.065047] usb 5-2: New USB device found, idVendor=1130, idProduct=1620 > [ 25.066319] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 > [ 25.067555] usb 5-2: Product: USB AUDIO > [ 25.075102] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:1130:1620.0003/input/input7 > [ 25.076471] hid-generic 0003:1130:1620.0003: input: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.3-2/input2 > [ 25.221055] usb 5-2: Warning! Unlikely big volume range (=17152), cval->res is probably wrong. > [ 25.222409] usb 5-2: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1 > [ 25.224044] usbcore: registered new interface driver snd-usb-audio > [ 25.224335] usb-storage 1-2:1.0: USB Mass Storage device detected > [ 25.224460] scsi host2: usb-storage 1-2:1.0 > [ 25.224547] usbcore: registered new interface driver usb-storage > [ 26.227231] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 > [ 26.228761] sd 2:0:0:0: Attached scsi generic sg3 type 0 > [ 26.231845] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 > [ 26.233354] sd 2:0:0:1: Attached scsi generic sg4 type 0 > [ 26.237088] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 > [ 26.238606] sd 2:0:0:2: Attached scsi generic sg5 type 0 > [ 26.242842] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 > [ 26.244394] sd 2:0:0:3: Attached scsi generic sg6 type 0 > [ 26.251462] sd 2:0:0:0: [sdb] Attached SCSI removable disk > [ 26.255845] sd 2:0:0:1: [sdc] Attached SCSI removable disk > [ 26.258836] sd 2:0:0:3: [sde] Attached SCSI removable disk > [ 26.260707] sd 2:0:0:2: [sdd] Attached SCSI removable disk > [ 27.161014] IR keymap rc-pinnacle-color not found > [ 27.162371] Registered IR keymap rc-empty > [ 27.163735] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input8 > [ 27.165248] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0 > [ 27.166597] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-9/9-0047/ir0 [saa7133[0]] > [ 27.201082] saa7133[0]: registered device video0 [v4l2] > [ 27.202512] saa7133[0]: registered device vbi0 > [ 27.203876] saa7133[0]: registered device radio0 > [ 27.244494] dvb_init() allocating 1 frontend > [ 27.282022] DVB: registering new adapter (saa7133[0]) > [ 27.283403] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... > [ 27.310010] tda1004x: setting up plls for 48MHz sampling clock > [ 27.472009] tda1004x: found firmware revision 20 -- ok > [ 27.651760] saa7134 ALSA driver for DMA sound loaded > [ 27.653194] saa7133[0]/alsa: saa7133[0] at 0xe1605000 irq 19 registered as card -1 > [ 30.518476] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 > [ 30.519470] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 > [ 30.526803] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 > [ 30.527799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 > [ 30.534924] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 > [ 30.535003] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 > [ 30.543181] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 > [ 30.544011] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 > [ 31.268683] kjournald starting. Commit interval 5 seconds > [ 31.268703] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended > [ 31.268955] EXT3-fs (sda5): using internal journal > [ 31.268957] EXT3-fs (sda5): recovery complete > [ 31.268958] EXT3-fs (sda5): mounted filesystem with writeback data mode > [ 34.117149] kjournald starting. Commit interval 5 seconds > [ 34.117182] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended > [ 34.117416] EXT3-fs (sda9): using internal journal > [ 34.162366] EXT3-fs (sda9): recovery complete > [ 34.163775] EXT3-fs (sda9): mounted filesystem with writeback data mode > [ 43.494077] kjournald starting. Commit interval 5 seconds > [ 43.494103] EXT3-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended > [ 43.496954] EXT3-fs (sda10): using internal journal > [ 43.541335] EXT3-fs (sda10): recovery complete > [ 43.542775] EXT3-fs (sda10): mounted filesystem with writeback data mode > [ 43.610520] Adding 7815584k swap on /dev/sda11. Priority:-1 extents:1 across:7815584k > [ 44.343311] r8169 0000:02:00.0 eth0: link down > [ 44.343330] r8169 0000:02:00.0 eth0: link down > [ 46.039133] r8169 0000:02:00.0 eth0: link up > [ 47.104089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v3.17-rc4+: DRM warning 2014-09-12 8:51 ` Daniel Vetter @ 2014-09-12 9:24 ` Chris Clayton 2014-09-12 12:46 ` [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv ville.syrjala 0 siblings, 1 reply; 6+ messages in thread From: Chris Clayton @ 2014-09-12 9:24 UTC (permalink / raw) To: Daniel Vetter; +Cc: intel-gfx On 09/12/14 09:51, Daniel Vetter wrote: > On Fri, Sep 12, 2014 at 08:49:48AM +0100, Chris Clayton wrote: >> Hi, >> >> Firstly, please cc me on any reply because I'm not subscribed to LKML. >> >> I've just built and installed the current development kernel (v3.17-rc4-222-gc73f6fd)on a desktop machine and I'm >> getting a warning that I haven't seen before. A full dmesg is attached, but the warning is: > > Please boot with drm.debug=0xe, reproduce the issue and attach the > complete dmesg (from boot-up to the backtrace). > > Thanks, Daniel Thanks Daniel. Here's the debug dmesg. [ 0.078412] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.078447] pci 0000:02:00.0: supports D1 D2 [ 0.078448] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080016] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.080057] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.080060] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.080066] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.080108] pci 0000:03:01.0: [1131:7133] type 00 class 0x048000 [ 0.080124] pci 0000:03:01.0: reg 0x10: [mem 0xe1605000-0xe16057ff] [ 0.080184] pci 0000:03:01.0: supports D1 D2 [ 0.080235] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.080250] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff] [ 0.080259] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff] [ 0.080311] pci 0000:03:07.0: supports D1 D2 [ 0.080313] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.080373] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.080417] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.080422] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.080423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.080425] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.080427] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.080428] pci 0000:00:1e.0: bridge window [mem 0xbdd00000-0xfebfffff] (subtractive decode) [ 0.080442] pci_bus 0000:00: on NUMA node 0 [ 0.080784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.081090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.081412] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.081714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.082021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082382] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.082721] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.083042] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.083399] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.083525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.083525] vgaarb: loaded [ 0.083525] vgaarb: bridge control possible 0000:00:02.0 [ 0.083525] SCSI subsystem initialized [ 0.083525] libata version 3.00 loaded. [ 0.083525] ACPI: bus type USB registered [ 0.083525] usbcore: registered new interface driver usbfs [ 0.083525] usbcore: registered new interface driver hub [ 0.084024] usbcore: registered new device driver usb [ 0.084108] Advanced Linux Sound Architecture Driver Initialized. [ 0.084155] PCI: Using ACPI for IRQ routing [ 0.084209] PCI: pci_cache_line_size set to 64 bytes [ 0.084245] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.084246] e820: reserve RAM buffer [mem 0xbdce0000-0xbfffffff] [ 0.084384] Switched to clocksource hpet [ 0.084496] pnp: PnP ACPI init [ 0.084620] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.084659] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.084698] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.084737] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.084775] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.084815] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084866] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.084960] pnp 00:02: [dma 2] [ 0.084960] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.084960] system 00:03: [io 0x0400-0x04cf] could not be reserved [ 0.084960] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084960] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.084968] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.085104] system 00:05: [mem 0x000cc600-0x000cffff] has been reserved [ 0.085145] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.085185] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.085226] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.085266] system 00:05: [mem 0xbdce0000-0xbdcfffff] could not be reserved [ 0.085307] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.085348] system 00:05: [mem 0x00100000-0xbdcdffff] could not be reserved [ 0.085388] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.085429] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.085469] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.085508] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.085548] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.085588] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved [ 0.085628] system 00:05: [mem 0x000e0000-0x000effff] has been reserved [ 0.085668] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.085675] pnp: PnP ACPI: found 6 devices [ 0.093789] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.093792] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.093794] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.093807] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment [ 0.093849] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.093851] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.093853] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.093857] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbdd00000-0xbdefffff] [ 0.093900] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.093942] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.093981] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.094022] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.094063] pci 0000:00:1c.0: bridge window [mem 0xbdd00000-0xbdefffff] [ 0.094105] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094150] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 0.094191] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.094229] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.094270] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.094312] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094356] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.094395] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.094440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.094442] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.094443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094445] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094446] pci_bus 0000:00: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094448] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.094450] pci_bus 0000:01: resource 1 [mem 0xbdd00000-0xbdefffff] [ 0.094451] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.094453] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.094454] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff] [ 0.094456] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.094457] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff] [ 0.094459] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.094461] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.094462] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.094464] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.094465] pci_bus 0000:03: resource 8 [mem 0xbdd00000-0xfebfffff] [ 0.094488] NET: Registered protocol family 2 [ 0.094705] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.094882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.095194] TCP: Hash tables configured (established 65536 bind 65536) [ 0.095272] TCP: reno registered [ 0.095307] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095388] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.095533] NET: Registered protocol family 1 [ 0.095588] pci 0000:00:02.0: Boot video device [ 0.107099] PCI: CLS 32 bytes, default 64 [ 0.107129] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.107173] software IO TLB [mem 0xb9ce0000-0xbdce0000] (64MB) mapped at [ffff8800b9ce0000-ffff8800bdcdffff] [ 0.107485] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107528] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107580] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107640] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.107747] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.108028] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.110425] fuse init (API version 7.23) [ 0.110571] msgmni has been set to 15887 [ 0.111663] io scheduler noop registered [ 0.111751] io scheduler cfq registered (default) [ 0.112050] intel_idle: does not run on family 6 model 23 [ 0.112100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.112146] ACPI: Power Button [PWRB] [ 0.112235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.112276] ACPI: Power Button [PWRF] [ 0.112356] tsc: Marking TSC unstable due to TSC halts in idle [ 0.112400] ACPI: acpi_idle registered with cpuidle [ 0.117536] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117836] Linux agpgart interface v0.103 [ 0.117922] agpgart-intel 0000:00:00.0: Intel G41 Chipset [ 0.117978] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.118551] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.118725] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.118810] [drm] Initialized drm 1.1.0 20060810 [ 0.118933] ata_piix 0000:00:1f.2: version 2.13 [ 0.119046] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.119689] scsi host0: ata_piix [ 0.119883] scsi host1: ata_piix [ 0.119945] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.119985] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.120076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.120147] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.120459] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000028000, 6c:f0:49:14:96:87, XID 1c4000c0 IRQ 17 [ 0.120517] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 0.120644] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.121073] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.121128] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.121334] mousedev: PS/2 mouse device common for all mice [ 0.121628] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 0.121824] usbcore: registered new interface driver usbhid [ 0.121862] usbhid: USB HID core driver [ 0.122299] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.122338] TCP: cubic registered [ 0.122383] NET: Registered protocol family 15 [ 0.122749] registered taskstats version 1 [ 0.132477] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 0.132520] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 0.132560] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 0.132598] sound hdaudioC0D2: mono: mono_out=0x0 [ 0.132634] sound hdaudioC0D2: dig-out=0x1e/0x0 [ 0.132670] sound hdaudioC0D2: inputs: [ 0.132706] sound hdaudioC0D2: Rear Mic=0x18 [ 0.132742] sound hdaudioC0D2: Front Mic=0x19 [ 0.132778] sound hdaudioC0D2: Line=0x1a [ 0.132813] sound hdaudioC0D2: CD=0x1c [ 0.132848] sound hdaudioC0D2: dig-in=0x1f [ 0.300332] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL03, max UDMA/100 [ 0.304207] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 0.304253] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 0.304294] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.304339] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133 [ 0.306177] ata2.01: configured for UDMA/100 [ 0.308223] ata1.00: configured for UDMA/133 [ 0.346120] ata1.01: configured for UDMA/133 [ 0.351956] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 [ 0.352158] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.352197] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.361075] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5 [ 0.361106] sd 0:0:0:0: [sda] Write Protect is off [ 0.361109] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.361140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.430685] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.430742] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.430897] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.430942] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.434450] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL03 PQ: 0 ANSI: 5 [ 0.463839] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.464084] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.464152] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 0.543506] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 0.544170] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.544414] ALSA device list: [ 0.544450] #0: HDA Intel at 0xe1700000 irq 16 [ 0.587826] EXT3-fs (sda2): recovery required on readonly filesystem [ 0.587867] EXT3-fs (sda2): write access will be enabled during recovery [ 0.966553] random: nonblocking pool is initialized [ 13.469153] kjournald starting. Commit interval 5 seconds [ 13.491568] EXT3-fs (sda2): recovery complete [ 13.491608] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 13.491662] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 13.500916] devtmpfs: mounted [ 13.501626] Freeing unused kernel memory: 776K (ffffffff8165f000 - ffffffff81721000) [ 14.536765] EXT3-fs (sda2): using internal journal [ 15.094630] udevd[101]: starting version 182 [ 15.472482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.482817] ehci-pci: EHCI PCI platform driver [ 15.483042] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 15.483087] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 15.487039] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 15.487057] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000 [ 15.493019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 15.493096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.493139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.493181] usb usb1: Product: EHCI Host Controller [ 15.493234] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd [ 15.493272] usb usb1: SerialNumber: 0000:00:1d.7 [ 15.493424] hub 1-0:1.0: USB hub found [ 15.493468] hub 1-0:1.0: 8 ports detected [ 15.795035] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 15.824051] uhci_hcd: USB Universal Host Controller Interface driver [ 15.824245] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.824299] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 15.824386] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 15.824477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.824517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.824558] usb usb2: Product: UHCI Host Controller [ 15.824594] usb usb2: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.824632] usb usb2: SerialNumber: 0000:00:1d.0 [ 15.824829] hub 2-0:1.0: USB hub found [ 15.824874] hub 2-0:1.0: 2 ports detected [ 15.825122] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.825164] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 15.825226] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 15.825305] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.825345] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.825386] usb usb3: Product: UHCI Host Controller [ 15.825422] usb usb3: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.825460] usb usb3: SerialNumber: 0000:00:1d.1 [ 15.825586] hub 3-0:1.0: USB hub found [ 15.825628] hub 3-0:1.0: 2 ports detected [ 15.825812] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.825853] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 15.825920] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 15.825993] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.826066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.826107] usb usb4: Product: UHCI Host Controller [ 15.826143] usb usb4: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.826181] usb usb4: SerialNumber: 0000:00:1d.2 [ 15.826306] hub 4-0:1.0: USB hub found [ 15.826348] hub 4-0:1.0: 2 ports detected [ 15.826525] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.826566] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 15.826625] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 15.826699] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.826740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.826780] usb usb5: Product: UHCI Host Controller [ 15.826816] usb usb5: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd [ 15.826854] usb usb5: SerialNumber: 0000:00:1d.3 [ 15.826974] hub 5-0:1.0: USB hub found [ 15.827040] hub 5-0:1.0: 2 ports detected [ 15.913020] usb 1-2: New USB device found, idVendor=05e3, idProduct=070e [ 15.913065] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 15.913108] usb 1-2: Product: USB Storage [ 15.913144] usb 1-2: SerialNumber: 000000009317 [ 16.021061] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 16.033850] Linux video capture interface: v2.00 [ 16.099230] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 16.099399] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1605000 [ 16.099460] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] [ 16.099528] saa7133[0]: board init: gpio is 600c000 [ 16.190082] [drm:i915_dump_device_info] i915 device info: gen=4, pciid=0x2e32 rev=0x03 flags=need_gfx_hws,is_g4x,has_pipe_cxsr,has_hotplug, [ 16.190109] [drm:intel_detect_pch] No PCH found. [ 16.190112] [drm] Memory usable by graphics device = 2048M [ 16.190153] [drm:i915_gem_gtt_init] GMADR size = 256M [ 16.190154] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 16.190155] [drm:i915_gem_gtt_init] ppgtt mode: 0 [ 16.190156] [drm] Replacing VGA console driver [ 16.190687] Console: switching to colour dummy device 80x25 [ 16.191130] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbdce0800 [ 16.191139] [drm:intel_opregion_setup] SWSCI supported [ 16.197015] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001) [ 16.197017] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 16.197039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.197045] [drm] Driver supports precise vblank timestamp query. [ 16.197049] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 16.197052] [drm:validate_vbt] Using VBT from OpRegion: $VBT EAGLELAKE d [ 16.197055] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 16.197057] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 16.197060] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 16.197063] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 16.197065] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 16.197066] [drm:parse_driver_features] DRRS State Enabled:0 [ 16.197077] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 16.197086] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at be000000 [ 16.197088] [drm:intel_display_power_get] enabling always-on [ 16.197109] [drm:intel_modeset_init] 2 display pipes available. [ 16.197115] [drm:intel_modeset_init] pipe A sprite A init failed: -19 [ 16.197120] [drm:intel_modeset_init] pipe B sprite B init failed: -19 [ 16.197124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 16.197486] [drm:intel_setup_outputs] probing SDVOB [ 16.197489] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 16.197771] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 16.197773] [drm:intel_sdvo_init] No SDVO device found on SDVOB [ 16.197796] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 16.197798] [drm:intel_setup_outputs] probing HDMI on SDVOB [ 16.197847] [drm:intel_dp_init_connector] Adding DP connector on port B [ 16.197879] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 16.197897] [drm:intel_setup_outputs] probing SDVOC [ 16.197898] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 16.198189] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 16.198190] [drm:intel_sdvo_init] No SDVO device found on SDVOC [ 16.198204] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 16.198209] [drm:intel_setup_outputs] probing HDMI on SDVOC [ 16.198238] [drm:intel_dp_init_connector] Adding DP connector on port C [ 16.198263] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 16.198287] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled [ 16.198288] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled [ 16.198290] [drm:intel_modeset_readout_hw_state] [ENCODER:12:DAC-12] hw state readout: disabled, pipe A [ 16.198293] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 16.198294] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 16.198296] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 16.198298] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 16.198300] [drm:intel_modeset_readout_hw_state] [CONNECTOR:11:VGA-1] hw state readout: disabled [ 16.198301] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:HDMI-A-1] hw state readout: enabled [ 16.198303] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled [ 16.198304] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [ 16.198306] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled [ 16.198309] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A [ 16.198310] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.198311] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.198313] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198314] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198315] [drm:intel_dump_pipe_config] requested mode: [ 16.198317] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 16.198318] [drm:intel_dump_pipe_config] adjusted mode: [ 16.198320] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 16.198322] [drm:intel_dump_crtc_timings] crtc timings: 25200 640 656 752 800 400 450 452 525, type: 0x0 flags: 0x5 [ 16.198326] [drm:intel_dump_pipe_config] port clock: 25200 [ 16.198327] [drm:intel_dump_pipe_config] pipe src size: 640x400 [ 16.198329] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.198330] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.198331] [drm:intel_dump_pipe_config] ips: 0 [ 16.198332] [drm:intel_dump_pipe_config] double wide: 0 [ 16.198335] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 16.198336] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 16.198338] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 16.198339] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B [ 16.198340] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 16.198341] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 16.198343] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198344] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.198345] [drm:intel_dump_pipe_config] requested mode: [ 16.198347] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.198348] [drm:intel_dump_pipe_config] adjusted mode: [ 16.198350] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.198352] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 16.198353] [drm:intel_dump_pipe_config] port clock: 0 [ 16.198354] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 16.198355] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.198356] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.198357] [drm:intel_dump_pipe_config] ips: 0 [ 16.198358] [drm:intel_dump_pipe_config] double wide: 0 [ 16.198360] [drm:intel_connector_check_state] [CONNECTOR:14:HDMI-A-1] [ 16.198363] [drm:check_encoder_state] [ENCODER:12:DAC-12] [ 16.198364] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 16.198365] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 16.198367] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 16.198368] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 16.198370] [drm:check_crtc_state] [CRTC:7] [ 16.198374] [drm:check_crtc_state] [CRTC:10] [ 16.198379] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=640x400@16, offset=0, pitch 1536, size 0x96000 [ 16.198380] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=96000 [ 16.198384] [drm:i915_pages_create_for_stolen] offset=0x0, size=614400 [ 16.198387] [drm:intel_alloc_plane_obj] plane fb obj ffff880231766000 [ 16.198389] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 96000 [ 16.198391] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [96000, 7ffff000] [ 16.200360] [drm:i915_gem_context_init] fake context support initialized [ 16.200373] [drm:init_status_page] render ring hws offset: 0x00097000 [ 16.200375] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 16.200377] [drm:i915_pages_create_for_stolen] offset=0x96000, size=131072 [ 16.200400] [drm:init_status_page] bsd ring hws offset: 0x000ba000 [ 16.200402] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 16.200403] [drm:i915_pages_create_for_stolen] offset=0xb6000, size=131072 [ 16.200422] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:11:VGA-1] [ 16.200424] [drm:intel_crt_detect] [CONNECTOR:11:VGA-1] force=1 [ 16.202156] saa7133[0]: i2c eeprom read error (err=-5) [ 16.212011] [drm:intel_crt_detect] CRT not detected via hotplug [ 16.213012] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 16.213014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 16.213015] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 16.213017] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 16.213278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 16.213280] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 16.213281] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 16.213283] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:11:VGA-1] disconnected [ 16.213285] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:HDMI-A-1] [ 16.213287] [drm:intel_hdmi_detect] [CONNECTOR:14:HDMI-A-1] [ 16.254012] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 16.295065] [drm:drm_edid_to_eld] ELD monitor E2250 [ 16.295068] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 16.295070] [drm:drm_edid_to_eld] ELD size 7, SAD count 1 [ 16.295089] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:HDMI-A-1] probed modes : [ 16.295092] [drm:drm_mode_debug_printmodeline] Modeline 26:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.295095] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 16.295098] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 16.295101] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 16.295104] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 16.295107] [drm:drm_mode_debug_printmodeline] Modeline 42:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 16.295110] [drm:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 16.295112] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 16.295115] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 16.295118] [drm:drm_mode_debug_printmodeline] Modeline 31:"1152x864" 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6 [ 16.295121] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 16.295124] [drm:drm_mode_debug_printmodeline] Modeline 51:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 16.295127] [drm:drm_mode_debug_printmodeline] Modeline 47:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 16.295129] [drm:drm_mode_debug_printmodeline] Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 16.295132] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 16.295135] [drm:drm_mode_debug_printmodeline] Modeline 43:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 16.295138] [drm:drm_mode_debug_printmodeline] Modeline 52:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 16.295140] [drm:drm_mode_debug_printmodeline] Modeline 30:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 16.295143] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 16.295146] [drm:drm_mode_debug_printmodeline] Modeline 41:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 16.295148] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 16.295151] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 16.295153] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 16.295155] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 16.295157] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 16.296016] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.296018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 16.296020] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 16.296022] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] [ 16.296023] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 16.296025] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected [ 16.296027] [drm:drm_setup_crtcs] [ 16.296029] [drm:drm_enable_connectors] connector 11 enabled? no [ 16.296031] [drm:drm_enable_connectors] connector 14 enabled? yes [ 16.296032] [drm:drm_enable_connectors] connector 19 enabled? no [ 16.296034] [drm:drm_enable_connectors] connector 21 enabled? no [ 16.296035] [drm:drm_enable_connectors] connector 23 enabled? no [ 16.296037] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 16.296039] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 16.296040] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 [ 16.296043] [drm:intel_fb_initial_config] connector HDMI-A-1 on pipe A [CRTC:7]: 1920x1080 [ 16.296044] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 16.296045] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 16.296047] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 16.296048] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 7 [ 16.296051] [drm:intelfb_create] no BIOS fb, allocating a new one [ 16.296053] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 16.296056] [drm:i915_pages_create_for_stolen] offset=0xd6000, size=8294400 [ 16.297427] [drm:intelfb_create] allocated 1920x1080 fb: 0x000dc000, bo ffff8802317668c0 [ 16.297496] fbcon: inteldrmfb (fb0) is primary device [ 16.297553] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 16.297555] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 16.297557] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 16.297559] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297560] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0 [ 16.297561] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.297564] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 16.297566] [drm:connected_sink_compute_bpp] [CONNECTOR:14:HDMI-A-1] checking for sink bpp constrains [ 16.297568] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 16.297568] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 16.297570] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 16.297571] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A [ 16.297572] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.297573] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.297574] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.297575] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.297576] [drm:intel_dump_pipe_config] requested mode: [ 16.297578] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297578] [drm:intel_dump_pipe_config] adjusted mode: [ 16.297580] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.297582] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 16.297583] [drm:intel_dump_pipe_config] port clock: 148500 [ 16.297584] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.297585] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.297586] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.297586] [drm:intel_dump_pipe_config] ips: 0 [ 16.297587] [drm:intel_dump_pipe_config] double wide: 0 [ 16.297589] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.311439] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 16.311440] [drm:intel_hpd_irq_handler] digital hpd port 2 1 [ 16.311441] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 16.311455] [drm:intel_dp_hpd_pulse] got hpd irq on port 2 - long [ 16.326021] tuner 9-004b: Tuner -1 found with type(s) Radio TV. [ 16.331027] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.331030] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 16.331071] [drm:i9xx_set_pipeconf] disabling CxSR downclocking [ 16.331075] [drm:i9xx_update_primary_plane] Writing base 000DC000 00000000 0 0 7680 [ 16.331078] [drm:intel_hdmi_prepare] Enabling HDMI audio on pipe A [ 16.331080] [drm:intel_write_eld] ELD on [CONNECTOR:14:HDMI-A-1], [ENCODER:13:TMDS-13] [ 16.331082] [drm:g4x_write_eld] ELD size 7 [ 16.331747] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 2 [ 16.331748] [drm:g4x_check_srwm] display watermark is too large(114/63), disabling [ 16.331749] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 16.331750] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=49, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 16.331759] [drm:intel_connector_check_state] [CONNECTOR:14:HDMI-A-1] [ 16.331762] [drm:check_encoder_state] [ENCODER:12:DAC-12] [ 16.331763] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 16.331765] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 16.331766] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 16.331768] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 16.331770] [drm:check_crtc_state] [CRTC:7] [ 16.331776] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0) [ 16.331776] ------------[ cut here ]------------ [ 16.331808] WARNING: CPU: 2 PID: 161 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]() [ 16.331809] pipe state doesn't match! [ 16.331819] Modules linked in: tda8290 tuner i915(+) saa7134(+) tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_core rc_core v4l2_common videodev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper firewire_ohci firewire_core uhci_hcd evdev ehci_pci ehci_hcd [ 16.331821] CPU: 2 PID: 161 Comm: modprobe Not tainted 3.17.0-rc4+ #322 [ 16.331822] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 16.331824] 0000000000000009 ffffffff8145a016 ffff8800b9bd73c0 ffffffff81040d0d [ 16.331825] ffff88023621f060 ffff8800b9bd7410 0000000000000001 ffff88023621f708 [ 16.331827] ffff8802317c0338 ffffffff81040d77 ffffffffa0209529 ffffffff00000018 [ 16.331828] Call Trace: [ 16.331833] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a [ 16.331836] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90 [ 16.331838] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50 [ 16.331858] [<ffffffffa01a5d03>] ? check_crtc_state+0x7e3/0xe50 [i915] [ 16.331879] [<ffffffffa01b3c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915] [ 16.331899] [<ffffffffa01b427d>] ? intel_set_mode+0x1d/0x30 [i915] [ 16.331923] [<ffffffffa01b534b>] ? intel_crtc_set_config+0xaab/0xe90 [i915] [ 16.331926] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50 [ 16.331929] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0 [ 16.331933] [<ffffffffa00c0eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper] [ 16.331935] [<ffffffffa00c0f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper] [ 16.331938] [<ffffffffa00c2f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper] [ 16.331958] [<ffffffffa01bfb61>] ? intel_fbdev_set_par+0x11/0x60 [i915] [ 16.331960] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670 [ 16.331963] [<ffffffff8127a66c>] ? visual_init+0xac/0x110 [ 16.331964] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410 [ 16.331966] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190 [ 16.331967] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0 [ 16.331970] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70 [ 16.331972] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60 [ 16.331974] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320 [ 16.331976] [<ffffffffa00c2dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper] [ 16.331995] [<ffffffffa01984f7>] ? gen4_read32+0x37/0x40 [i915] [ 16.332009] [<ffffffffa01e3f20>] ? i915_driver_load+0xfd0/0x1030 [i915] [ 16.332029] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0 [ 16.332031] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0 [ 16.332034] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0 [ 16.332036] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220 [ 16.332037] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90 [ 16.332038] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40 [ 16.332040] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90 [ 16.332041] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210 [ 16.332043] [<ffffffffa0222000>] ? 0xffffffffa0222000 [ 16.332044] [<ffffffff812b8326>] ? driver_register+0x56/0xe0 [ 16.332046] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0 [ 16.332049] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150 [ 16.332051] [<ffffffff8109c090>] ? store_uevent+0x40/0x40 [ 16.332053] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0 [ 16.332056] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e [ 16.332057] ---[ end trace f39c85dc9dc2a812 ]--- [ 16.332058] [drm:intel_dump_pipe_config] [CRTC:7][hw state] config for pipe A [ 16.332059] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.332060] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.332061] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332062] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332063] [drm:intel_dump_pipe_config] requested mode: [ 16.332065] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 16.332065] [drm:intel_dump_pipe_config] adjusted mode: [ 16.332067] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 16.332069] [drm:intel_dump_crtc_timings] crtc timings: 148800 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 16.332070] [drm:intel_dump_pipe_config] port clock: 148800 [ 16.332071] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.332072] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.332073] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.332073] [drm:intel_dump_pipe_config] ips: 0 [ 16.332078] [drm:intel_dump_pipe_config] double wide: 0 [ 16.332079] [drm:intel_dump_pipe_config] [CRTC:7][sw state] config for pipe A [ 16.332079] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.332080] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.332082] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332083] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.332083] [drm:intel_dump_pipe_config] requested mode: [ 16.332085] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.332086] [drm:intel_dump_pipe_config] adjusted mode: [ 16.332088] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.332089] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 16.332090] [drm:intel_dump_pipe_config] port clock: 148500 [ 16.332091] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 16.332092] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.332093] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.332093] [drm:intel_dump_pipe_config] ips: 0 [ 16.332094] [drm:intel_dump_pipe_config] double wide: 0 [ 16.332095] [drm:check_crtc_state] [CRTC:10] [ 16.332099] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 16.332100] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 16.332102] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.332111] Console: switching to colour frame buffer device 240x67 [ 16.332121] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 16.332123] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 16.332124] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 16.333927] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 16.333930] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 16.333931] [drm:i915_hotplug_work_func] Connector DP-2 (pin 5) received hotplug event. [ 16.333933] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 16.335023] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.335024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 16.335027] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 16.355783] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 16.357093] i915 0000:00:02.0: registered panic notifier [ 16.363014] tda829x 9-004b: setting tuner address to 61 [ 16.363083] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 16.522105] firewire_core 0000:03:07.0: created device fw0: GUID 00201c56006cf049, S400 [ 16.526036] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 16.691699] usb 5-1: New USB device found, idVendor=046d, idProduct=c517 [ 16.693168] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.694561] usb 5-1: Product: USB Receiver [ 16.695910] usb 5-1: Manufacturer: Logitech [ 16.714013] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5 [ 16.715410] logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0 [ 16.748734] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 16.750736] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6 [ 16.752189] logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1 [ 16.873028] tda829x 9-004b: type set to tda8290+75a [ 16.959025] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 17.122699] usb 5-2: New USB device found, idVendor=1130, idProduct=1620 [ 17.124054] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 17.125300] usb 5-2: Product: USB AUDIO [ 17.132751] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:1130:1620.0003/input/input7 [ 17.134092] hid-generic 0003:1130:1620.0003: input: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.3-2/input2 [ 17.600514] usb-storage 1-2:1.0: USB Mass Storage device detected [ 17.601990] scsi host2: usb-storage 1-2:1.0 [ 17.603363] usbcore: registered new interface driver usb-storage [ 17.694702] usb 5-2: Warning! Unlikely big volume range (=17152), cval->res is probably wrong. [ 17.696048] usb 5-2: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1 [ 17.697617] usbcore: registered new interface driver snd-usb-audio [ 18.605162] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.606672] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 18.609276] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.610747] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 18.614156] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.615659] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 18.619653] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 18.621207] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 18.626907] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 18.632155] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 18.635527] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 18.637033] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 19.882013] IR keymap rc-pinnacle-color not found [ 19.883357] Registered IR keymap rc-empty [ 19.884720] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input8 [ 19.886171] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0 [ 19.887513] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-9/9-0047/ir0 [saa7133[0]] [ 19.923088] saa7133[0]: registered device video0 [v4l2] [ 19.924498] saa7133[0]: registered device vbi0 [ 19.925835] saa7133[0]: registered device radio0 [ 19.976401] dvb_init() allocating 1 frontend [ 19.992019] DVB: registering new adapter (saa7133[0]) [ 19.993364] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 20.027010] tda1004x: setting up plls for 48MHz sampling clock [ 20.189010] tda1004x: found firmware revision 20 -- ok [ 20.361263] saa7134 ALSA driver for DMA sound loaded [ 20.362690] saa7133[0]/alsa: saa7133[0] at 0xe1605000 irq 19 registered as card -1 [ 23.273152] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.274147] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 23.281468] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.282464] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 23.289593] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.290589] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 [ 23.297836] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 23.298003] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 [ 24.089261] kjournald starting. Commit interval 5 seconds [ 24.089281] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 24.089532] EXT3-fs (sda5): using internal journal [ 24.089534] EXT3-fs (sda5): recovery complete [ 24.089535] EXT3-fs (sda5): mounted filesystem with writeback data mode [ 26.459925] kjournald starting. Commit interval 5 seconds [ 26.459958] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended [ 26.461398] EXT3-fs (sda9): using internal journal [ 26.505171] EXT3-fs (sda9): recovery complete [ 26.506599] EXT3-fs (sda9): mounted filesystem with writeback data mode [ 26.625848] kjournald starting. Commit interval 5 seconds [ 26.625863] EXT3-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended [ 26.626101] EXT3-fs (sda10): using internal journal [ 26.673147] EXT3-fs (sda10): recovery complete [ 26.674583] EXT3-fs (sda10): mounted filesystem with writeback data mode [ 26.742442] Adding 7815584k swap on /dev/sda11. Priority:-1 extents:1 across:7815584k [ 27.208321] r8169 0000:02:00.0 eth0: link down [ 27.209572] r8169 0000:02:00.0 eth0: link down [ 28.956717] r8169 0000:02:00.0 eth0: link up [ 29.980346] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 57.899273] [drm:i915_gem_open] [ 57.899326] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 57.899331] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 57.899333] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 57.899335] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 57.899336] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 57.899338] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 59.502428] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0) [ 59.502432] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 59.502434] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 59.507507] [drm:i915_gem_open] [ 59.507519] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575074] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575093] [drm:drm_mode_addfb] [FB:39] [ 59.575351] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575354] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 59.575396] [drm:drm_mode_getconnector] [CONNECTOR:11:?] [ 59.575411] [drm:drm_mode_getconnector] [CONNECTOR:11:?] [ 59.575445] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 59.575452] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 59.575488] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 59.575492] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 59.575518] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 59.575523] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 59.575550] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 59.575554] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 60.960488] [drm:drm_mode_addfb] [FB:39] [ 60.960784] [drm:drm_mode_setcrtc] [CRTC:7] [ 60.960788] [drm:drm_mode_setcrtc] [CONNECTOR:14:HDMI-A-1] [ 60.960791] [drm:intel_crtc_set_config] [CRTC:7] [FB:39] #connectors=1 (x y) (0 0) [ 60.960794] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=1 [ 60.960796] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 60.963774] [drm:i9xx_update_primary_plane] Writing base 008E5000 00000000 0 0 7680 [ 60.975025] [drm:drm_mode_setcrtc] [CRTC:10] [ 60.975027] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 60.975029] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 60.975031] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:HDMI-A-1] to [CRTC:7] [ 64.691186] [drm:add_framebuffer_internal] [FB:40] [ 64.691196] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 6 [ 64.691197] [drm:g4x_check_srwm] display watermark is too large(114/63), disabling [ 64.691199] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 64.691201] [drm:g4x_update_wm] Setting FIFO watermarks - A: plane=49, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv 2014-09-12 9:24 ` Chris Clayton @ 2014-09-12 12:46 ` ville.syrjala 2014-09-12 15:08 ` Chris Clayton 0 siblings, 1 reply; 6+ messages in thread From: ville.syrjala @ 2014-09-12 12:46 UTC (permalink / raw) To: intel-gfx; +Cc: Chris Clayton From: Ville Syrjälä <ville.syrjala@linux.intel.com> The limited color range knob is in the port registers on g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code to read out the hardware state into pipe config. On vlv/chv the DP port limited color range knob is in PIPECONF for which we already have readout code. Cc: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/intel_dp.c | 4 ++++ drivers/gpu/drm/i915/intel_hdmi.c | 7 ++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d8e868a..d73b4b7 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1910,6 +1910,10 @@ static void intel_dp_get_config(struct intel_encoder *encoder, pipe_config->adjusted_mode.flags |= flags; + if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && + tmp & DP_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + pipe_config->has_dp_encoder = true; intel_dp_get_m_n(crtc, pipe_config); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index c586173..8199371 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -712,7 +712,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp, flags = 0; int dotclock; @@ -734,6 +735,10 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, if (tmp & HDMI_MODE_SELECT_HDMI) pipe_config->has_audio = true; + if (!HAS_PCH_SPLIT(dev) && + tmp & HDMI_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + pipe_config->adjusted_mode.flags |= flags; if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc) -- 1.8.5.5 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv 2014-09-12 12:46 ` [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv ville.syrjala @ 2014-09-12 15:08 ` Chris Clayton 2014-09-15 9:21 ` Jani Nikula 0 siblings, 1 reply; 6+ messages in thread From: Chris Clayton @ 2014-09-12 15:08 UTC (permalink / raw) To: ville.syrjala, intel-gfx On 09/12/14 13:46, ville.syrjala@linux.intel.com wrote: > From: Ville Syrjälä <ville.syrjala@linux.intel.com> > > The limited color range knob is in the port registers on > g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code > to read out the hardware state into pipe config. On vlv/chv the > DP port limited color range knob is in PIPECONF for which we > already have readout code. > With the patch below applied, the warning has gone away. My thanks to Daniel and Ville. Tested-by: Chris Clayton <chris2553@googlemail.com> > Cc: Chris Clayton <chris2553@googlemail.com> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > --- > drivers/gpu/drm/i915/intel_dp.c | 4 ++++ > drivers/gpu/drm/i915/intel_hdmi.c | 7 ++++++- > 2 files changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c > index d8e868a..d73b4b7 100644 > --- a/drivers/gpu/drm/i915/intel_dp.c > +++ b/drivers/gpu/drm/i915/intel_dp.c > @@ -1910,6 +1910,10 @@ static void intel_dp_get_config(struct intel_encoder *encoder, > > pipe_config->adjusted_mode.flags |= flags; > > + if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && > + tmp & DP_COLOR_RANGE_16_235) > + pipe_config->limited_color_range = true; > + > pipe_config->has_dp_encoder = true; > > intel_dp_get_m_n(crtc, pipe_config); > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > index c586173..8199371 100644 > --- a/drivers/gpu/drm/i915/intel_hdmi.c > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > @@ -712,7 +712,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, > struct intel_crtc_config *pipe_config) > { > struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); > - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; > + struct drm_device *dev = encoder->base.dev; > + struct drm_i915_private *dev_priv = dev->dev_private; > u32 tmp, flags = 0; > int dotclock; > > @@ -734,6 +735,10 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, > if (tmp & HDMI_MODE_SELECT_HDMI) > pipe_config->has_audio = true; > > + if (!HAS_PCH_SPLIT(dev) && > + tmp & HDMI_COLOR_RANGE_16_235) > + pipe_config->limited_color_range = true; > + > pipe_config->adjusted_mode.flags |= flags; > > if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc) > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv 2014-09-12 15:08 ` Chris Clayton @ 2014-09-15 9:21 ` Jani Nikula 0 siblings, 0 replies; 6+ messages in thread From: Jani Nikula @ 2014-09-15 9:21 UTC (permalink / raw) To: Chris Clayton, ville.syrjala, intel-gfx On Fri, 12 Sep 2014, Chris Clayton <chris2553@googlemail.com> wrote: > On 09/12/14 13:46, ville.syrjala@linux.intel.com wrote: >> From: Ville Syrjälä <ville.syrjala@linux.intel.com> >> >> The limited color range knob is in the port registers on >> g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code >> to read out the hardware state into pipe config. On vlv/chv the >> DP port limited color range knob is in PIPECONF for which we >> already have readout code. >> > With the patch below applied, the warning has gone away. My thanks to Daniel and Ville. > > Tested-by: Chris Clayton <chris2553@googlemail.com> Pushed to drm-intel-fixes with Daniel's IRC reviewed-by. Thanks for the patch and testing. BR, Jani. > >> Cc: Chris Clayton <chris2553@googlemail.com> >> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> >> --- >> drivers/gpu/drm/i915/intel_dp.c | 4 ++++ >> drivers/gpu/drm/i915/intel_hdmi.c | 7 ++++++- >> 2 files changed, 10 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c >> index d8e868a..d73b4b7 100644 >> --- a/drivers/gpu/drm/i915/intel_dp.c >> +++ b/drivers/gpu/drm/i915/intel_dp.c >> @@ -1910,6 +1910,10 @@ static void intel_dp_get_config(struct intel_encoder *encoder, >> >> pipe_config->adjusted_mode.flags |= flags; >> >> + if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && >> + tmp & DP_COLOR_RANGE_16_235) >> + pipe_config->limited_color_range = true; >> + >> pipe_config->has_dp_encoder = true; >> >> intel_dp_get_m_n(crtc, pipe_config); >> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c >> index c586173..8199371 100644 >> --- a/drivers/gpu/drm/i915/intel_hdmi.c >> +++ b/drivers/gpu/drm/i915/intel_hdmi.c >> @@ -712,7 +712,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, >> struct intel_crtc_config *pipe_config) >> { >> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); >> - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; >> + struct drm_device *dev = encoder->base.dev; >> + struct drm_i915_private *dev_priv = dev->dev_private; >> u32 tmp, flags = 0; >> int dotclock; >> >> @@ -734,6 +735,10 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, >> if (tmp & HDMI_MODE_SELECT_HDMI) >> pipe_config->has_audio = true; >> >> + if (!HAS_PCH_SPLIT(dev) && >> + tmp & HDMI_COLOR_RANGE_16_235) >> + pipe_config->limited_color_range = true; >> + >> pipe_config->adjusted_mode.flags |= flags; >> >> if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc) >> > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-09-15 9:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-09-12 7:49 v3.17-rc4+: DRM warning Chris Clayton 2014-09-12 8:51 ` Daniel Vetter 2014-09-12 9:24 ` Chris Clayton 2014-09-12 12:46 ` [PATCH] drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv ville.syrjala 2014-09-12 15:08 ` Chris Clayton 2014-09-15 9:21 ` Jani Nikula
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox