From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915: Bump wait-times for the final CS interrupt before parking
Date: Fri, 20 Oct 2017 16:11:53 +0300 [thread overview]
Message-ID: <87vajage06.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <20171020095950.25714-1-chris@chris-wilson.co.uk>
Chris Wilson <chris@chris-wilson.co.uk> writes:
> In the idle worker we drop the prolonged GT wakeref used to cover such
> essentials as interrupt delivery. (When a CS interrupt arrives, we also
> assert that the GT is awake.) However, it turns out that 10ms is not
> long enough to be assured that the last CS interrupt has been delivered,
> so bump that to 200ms, and move the entirety of that wait to before we
> take the struct_mutex to avoid blocking. As this is now a potentially
> long wait, restore the earlier behaviour of bailing out early when a new
> request arrives.
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> ---
> drivers/gpu/drm/i915/i915_gem.c | 31 ++++++++++++++++++++-----------
> 1 file changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 026cb52ece0b..d3a638613857 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -3281,8 +3281,8 @@ i915_gem_idle_work_handler(struct work_struct *work)
> {
> struct drm_i915_private *dev_priv =
> container_of(work, typeof(*dev_priv), gt.idle_work.work);
> - struct drm_device *dev = &dev_priv->drm;
> bool rearm_hangcheck;
> + ktime_t end;
>
> if (!READ_ONCE(dev_priv->gt.awake))
> return;
> @@ -3291,14 +3291,22 @@ i915_gem_idle_work_handler(struct work_struct *work)
> * Wait for last execlists context complete, but bail out in case a
> * new request is submitted.
> */
> - wait_for(intel_engines_are_idle(dev_priv), 10);
> - if (READ_ONCE(dev_priv->gt.active_requests))
> - return;
> + end = ktime_add_ms(ktime_get(), 200);
> + do {
> + if (READ_ONCE(dev_priv->gt.active_requests) ||
> + work_pending(work))
> + return;
> +
> + if (intel_engines_are_idle(dev_priv))
> + break;
> +
> + usleep_range(100, 500);
> + } while (ktime_before(ktime_get(), end));
>
Why can't we just wait_for(intel_engines_are_idle(dev_priv, 200)) ?
-Mika
> rearm_hangcheck =
> cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
>
> - if (!mutex_trylock(&dev->struct_mutex)) {
> + if (!mutex_trylock(&dev_priv->drm.struct_mutex)) {
> /* Currently busy, come back later */
> mod_delayed_work(dev_priv->wq,
> &dev_priv->gt.idle_work,
> @@ -3310,13 +3318,14 @@ i915_gem_idle_work_handler(struct work_struct *work)
> * New request retired after this work handler started, extend active
> * period until next instance of the work.
> */
> - if (work_pending(work))
> + if (dev_priv->gt.active_requests || work_pending(work))
> goto out_unlock;
>
> - if (dev_priv->gt.active_requests)
> - goto out_unlock;
> -
> - if (wait_for(intel_engines_are_idle(dev_priv), 10))
> + /*
> + * We are committed now to parking the engines, make sure there
> + * will be no more interrupts arriving later.
> + */
> + if (!intel_engines_are_idle(dev_priv))
> DRM_ERROR("Timeout waiting for engines to idle\n");
>
> intel_engines_mark_idle(dev_priv);
> @@ -3330,7 +3339,7 @@ i915_gem_idle_work_handler(struct work_struct *work)
> gen6_rps_idle(dev_priv);
> intel_runtime_pm_put(dev_priv);
> out_unlock:
> - mutex_unlock(&dev->struct_mutex);
> + mutex_unlock(&dev_priv->drm.struct_mutex);
>
> out_rearm:
> if (rearm_hangcheck) {
> --
> 2.15.0.rc1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-10-20 13:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 9:59 [PATCH 1/2] drm/i915: Bump wait-times for the final CS interrupt before parking Chris Wilson
2017-10-20 9:59 ` [PATCH 2/2] drm/i915: Filter out spurious execlists context-switch interrupts Chris Wilson
2017-10-20 11:48 ` [PATCH v2] " Chris Wilson
2017-10-20 13:21 ` [PATCH 2/2] " Mika Kuoppala
2017-10-20 13:24 ` Chris Wilson
2017-10-20 13:31 ` Mika Kuoppala
2017-10-20 13:47 ` Chris Wilson
2017-10-20 13:59 ` Mika Kuoppala
2017-10-20 14:24 ` Chris Wilson
2017-10-20 10:23 ` ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Bump wait-times for the final CS interrupt before parking Patchwork
2017-10-20 11:38 ` ✓ Fi.CI.IGT: " Patchwork
2017-10-20 12:19 ` ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Bump wait-times for the final CS interrupt before parking (rev2) Patchwork
2017-10-20 13:11 ` Mika Kuoppala [this message]
2017-10-20 13:19 ` [PATCH 1/2] drm/i915: Bump wait-times for the final CS interrupt before parking Chris Wilson
2017-10-20 13:23 ` Mika Kuoppala
2017-10-20 13:52 ` Chris Wilson
2017-10-20 13:47 ` ✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Bump wait-times for the final CS interrupt before parking (rev2) Patchwork
2017-10-23 11:52 ` [PATCH 1/2] drm/i915: Bump wait-times for the final CS interrupt before parking Mika Kuoppala
2017-10-23 12:00 ` Chris Wilson
-- strict thread matches above, loose matches on Subject: below --
2017-10-23 20:06 Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vajage06.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=chris@chris-wilson.co.uk \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox