public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 4/5] drm/i915: Extract hsw_configure_cpu_transcoder()
Date: Tue, 25 Jan 2022 07:38:01 +0200	[thread overview]
Message-ID: <87wnio1ikm.fsf@intel.com> (raw)
In-Reply-To: <20220124192638.26262-4-ville.syrjala@linux.intel.com>

On Mon, 24 Jan 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Pull the transcoder specific modeset steps into a single place.
> With bigoiner we need to keep in mind wheher we're dealing with
> the transcoder or the pipe, and a slightly higher level split makes
> that easier.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 38 ++++++++++++--------
>  1 file changed, 23 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index c23c854f212f..d2906434ab3f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -2012,6 +2012,27 @@ static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
>  		intel_uncompressed_joiner_enable(crtc_state);
>  }
>  
> +static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +
> +	intel_set_transcoder_timings(crtc_state);
> +
> +	if (cpu_transcoder != TRANSCODER_EDP)
> +		intel_de_write(dev_priv, PIPE_MULT(cpu_transcoder),
> +			       crtc_state->pixel_multiplier - 1);
> +
> +	if (crtc_state->has_pch_encoder)
> +		intel_cpu_transcoder_set_m_n(crtc_state,
> +					     &crtc_state->fdi_m_n, NULL);
> +
> +	hsw_set_frame_start_delay(crtc_state);
> +
> +	hsw_set_transconf(crtc_state);
> +}
> +
>  static void hsw_crtc_enable(struct intel_atomic_state *state,
>  			    struct intel_crtc *crtc)
>  {
> @@ -2040,21 +2061,8 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
>  	if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
>  		bdw_set_pipemisc(new_crtc_state);
>  
> -	if (!new_crtc_state->bigjoiner_slave && !transcoder_is_dsi(cpu_transcoder)) {
> -		intel_set_transcoder_timings(new_crtc_state);
> -
> -		if (cpu_transcoder != TRANSCODER_EDP)
> -			intel_de_write(dev_priv, PIPE_MULT(cpu_transcoder),
> -				       new_crtc_state->pixel_multiplier - 1);
> -
> -		if (new_crtc_state->has_pch_encoder)
> -			intel_cpu_transcoder_set_m_n(new_crtc_state,
> -						     &new_crtc_state->fdi_m_n, NULL);
> -
> -		hsw_set_frame_start_delay(new_crtc_state);
> -
> -		hsw_set_transconf(new_crtc_state);
> -	}
> +	if (!new_crtc_state->bigjoiner_slave && !transcoder_is_dsi(cpu_transcoder))
> +		hsw_configure_cpu_transcoder(new_crtc_state);
>  
>  	crtc->active = true;

-- 
Jani Nikula, Intel Open Source Graphics Center

  reply	other threads:[~2022-01-25  5:38 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-24 19:26 [Intel-gfx] [PATCH 1/5] drm/i915: Skip dsc readout if the transcoder is disabled Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 2/5] drm/i915: Simplify intel_dsc_source_support() Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 3/5] drm/i915: Use per-device debugs for bigjoiner stuff Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 4/5] drm/i915: Extract hsw_configure_cpu_transcoder() Ville Syrjala
2022-01-25  5:38   ` Jani Nikula [this message]
2022-01-24 19:26 ` [Intel-gfx] [PATCH 5/5] drm/i915: Move dsc/joiner enable into hsw_crtc_enable() Ville Syrjala
2022-01-25  5:40   ` Jani Nikula
2022-01-25  5:59     ` Ville Syrjälä
2022-01-25  6:39   ` [Intel-gfx] [PATCH v2 " Ville Syrjala
2022-01-25  6:50     ` Jani Nikula
2022-01-25  7:07       ` Ville Syrjälä
2022-01-24 23:59 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled Patchwork
2022-01-25  5:36 ` [Intel-gfx] [PATCH 1/5] " Jani Nikula
2022-01-25  5:38 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [1/5] " Patchwork
2022-01-25  8:20 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled (rev2) Patchwork
2022-01-26  7:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled (rev3) Patchwork
2022-01-26 10:00 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87wnio1ikm.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox