From: "Hogander, Jouni" <jouni.hogander@intel.com>
To: "intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
"Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Cc: "ville.syrjala@linux.intel.com" <ville.syrjala@linux.intel.com>,
"Manna, Animesh" <animesh.manna@intel.com>
Subject: Re: [PATCH 5/8] drm/i915/display: Check if final vblank is sufficient for PSR features
Date: Fri, 10 Oct 2025 06:53:17 +0000 [thread overview]
Message-ID: <9178808c08ec3e7dd1e7bc7cd36d8b4f977a2711.camel@intel.com> (raw)
In-Reply-To: <20251009090102.850344-6-ankit.k.nautiyal@intel.com>
On Thu, 2025-10-09 at 14:30 +0530, Ankit Nautiyal wrote:
> Currently, wake line latency checks rely on the vblank length,
> which does not account for either the extra vblank delay for icl/tgl
> or for
> the optimized guardband which will come into picture later at some
> point.
>
> Introduce intel_dp_compute_config_late() to handle late-stage
> configuration checks for DP/eDP features. For now, it validates
> whether the
> final vblank (with extra vblank delay) or guardband is sufficient to
> support wake line latencies required by Panel Replay and PSR2
> selective
> update.
>
> Check if vblank is sufficient for PSR features, and disable them if
> their
> wake requirements cannot be accomodated.
Now as we are adding this: Can't we just drop checks made earlier and
rely on psr_compute_config_late checking the vblank?
BR,
Jouni Högander
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> Cc: Animesh Manna <animesh.manna@intel.com>
> Cc: Jouni Högander <jouni.hogander@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 3 ++
> drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++
> drivers/gpu/drm/i915/display/intel_dp.h | 3 ++
> drivers/gpu/drm/i915/display/intel_psr.c | 51 ++++++++++++++++++++--
> --
> drivers/gpu/drm/i915/display/intel_psr.h | 2 +
> 5 files changed, 60 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index c09aa759f4d4..94c593bbedf4 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4560,6 +4560,9 @@ static int intel_ddi_compute_config_late(struct
> intel_encoder *encoder,
> struct drm_connector *connector = conn_state->connector;
> u8 port_sync_transcoders = 0;
>
> + if (intel_crtc_has_dp_encoder(crtc_state))
> + intel_dp_compute_config_late(encoder, crtc_state,
> conn_state);
> +
> drm_dbg_kms(display->drm, "[ENCODER:%d:%s] [CRTC:%d:%s]\n",
> encoder->base.base.id, encoder->base.name,
> crtc_state->uapi.crtc->base.id, crtc_state-
> >uapi.crtc->name);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index a723e846321f..e481ff4c4959 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -6979,3 +6979,12 @@ void intel_dp_mst_resume(struct intel_display
> *display)
> }
> }
> }
> +
> +void intel_dp_compute_config_late(struct intel_encoder *encoder,
> + struct intel_crtc_state
> *crtc_state,
> + struct drm_connector_state
> *conn_state)
> +{
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +
> + intel_psr_compute_config_late(intel_dp, crtc_state);
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h
> b/drivers/gpu/drm/i915/display/intel_dp.h
> index b379443e0211..0d9573ca44cb 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -218,5 +218,8 @@ int intel_dp_compute_min_hblank(struct
> intel_crtc_state *crtc_state,
> int intel_dp_dsc_bpp_step_x16(const struct intel_connector
> *connector);
> void intel_dp_dpcd_set_probe(struct intel_dp *intel_dp, bool
> force_on_external);
> bool intel_dp_in_hdr_mode(const struct drm_connector_state
> *conn_state);
> +void intel_dp_compute_config_late(struct intel_encoder *encoder,
> + struct intel_crtc_state
> *crtc_state,
> + struct drm_connector_state
> *conn_state);
>
> #endif /* __INTEL_DP_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 212bd244beed..dcab4127b399 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -1405,6 +1405,20 @@ int _intel_psr_min_set_context_latency(const
> struct intel_crtc_state *crtc_state
> return 1;
> }
>
> +static bool _wake_lines_fit_into_vblank(const struct
> intel_crtc_state *crtc_state,
> + int vblank,
> + int wake_lines)
> +{
> + if (crtc_state->req_psr2_sdp_prior_scanline)
> + vblank -= 1;
> +
> + /* Vblank >= PSR2_CTL Block Count Number maximum line count
> */
> + if (vblank < wake_lines)
> + return false;
> +
> + return true;
> +}
> +
> static bool wake_lines_fit_into_vblank(struct intel_dp *intel_dp,
> const struct intel_crtc_state
> *crtc_state,
> bool aux_less,
> @@ -1428,14 +1442,7 @@ static bool wake_lines_fit_into_vblank(struct
> intel_dp *intel_dp,
> crtc_state-
> >alpm_state.fast_wake_lines) :
> crtc_state->alpm_state.io_wake_lines;
>
> - if (crtc_state->req_psr2_sdp_prior_scanline)
> - vblank -= 1;
> -
> - /* Vblank >= PSR2_CTL Block Count Number maximum line count
> */
> - if (vblank < wake_lines)
> - return false;
> -
> - return true;
> + return _wake_lines_fit_into_vblank(crtc_state, vblank,
> wake_lines);
> }
>
> static bool alpm_config_valid(struct intel_dp *intel_dp,
> @@ -4346,3 +4353,31 @@ bool intel_psr_needs_alpm_aux_less(struct
> intel_dp *intel_dp,
> {
> return intel_dp_is_edp(intel_dp) && crtc_state-
> >has_panel_replay;
> }
> +
> +void intel_psr_compute_config_late(struct intel_dp *intel_dp,
> + struct intel_crtc_state
> *crtc_state)
> +{
> + struct intel_display *display = to_intel_display(intel_dp);
> + int vblank = intel_crtc_vblank_length(crtc_state);
> + int aux_less_wake_lines = crtc_state-
> >alpm_state.aux_less_wake_lines;
> + int wake_lines = DISPLAY_VER(display) < 20 ?
> + psr2_block_count_lines(crtc_state-
> >alpm_state.io_wake_lines,
> + crtc_state-
> >alpm_state.fast_wake_lines) :
> + crtc_state->alpm_state.io_wake_lines;
> +
> + if (intel_psr_needs_alpm_aux_less(intel_dp, crtc_state) &&
> + !_wake_lines_fit_into_vblank(crtc_state, vblank,
> aux_less_wake_lines)) {
> + drm_dbg_kms(display->drm,
> + "Disabling Panel replay: vblank
> insufficient for wakelines = %d\n",
> + aux_less_wake_lines);
> + crtc_state->has_panel_replay = false;
> + }
> +
> + if (crtc_state->has_sel_update &&
> + !_wake_lines_fit_into_vblank(crtc_state, vblank,
> wake_lines)) {
> + drm_dbg_kms(display->drm,
> + "Disabling Selective Update: vblank
> insufficient for wakelines = %d\n",
> + wake_lines);
> + crtc_state->has_sel_update = false;
> + }
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> b/drivers/gpu/drm/i915/display/intel_psr.h
> index 9147996d6c9e..b17ce312dc37 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> @@ -83,5 +83,7 @@ void intel_psr_debugfs_register(struct
> intel_display *display);
> bool intel_psr_needs_alpm(struct intel_dp *intel_dp, const struct
> intel_crtc_state *crtc_state);
> bool intel_psr_needs_alpm_aux_less(struct intel_dp *intel_dp,
> const struct intel_crtc_state
> *crtc_state);
> +void intel_psr_compute_config_late(struct intel_dp *intel_dp,
> + struct intel_crtc_state
> *crtc_state);
>
> #endif /* __INTEL_PSR_H__ */
next prev parent reply other threads:[~2025-10-10 6:53 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-09 9:00 [PATCH 0/8] Preparatory patches for guardband optimization Ankit Nautiyal
2025-10-09 9:00 ` [PATCH 1/8] drm/i915/vrr: Use crtc_vsync_start/end for computing vrr.vsync_start/end Ankit Nautiyal
2025-10-09 9:00 ` [PATCH 2/8] drm/i915/vrr: s/intel_vrr_compute_config_late/intel_vrr_compute_guardband Ankit Nautiyal
2025-10-10 14:53 ` Ville Syrjälä
2025-10-13 2:31 ` Nautiyal, Ankit K
2025-10-09 9:00 ` [PATCH 3/8] drm/i915/vblank: Add helper to get correct vblank length Ankit Nautiyal
2025-10-10 14:54 ` Ville Syrjälä
2025-10-09 9:00 ` [PATCH 4/8] drm/i915/psr: Consider SCL lines when validating vblank for wake latency Ankit Nautiyal
2025-10-10 6:40 ` Hogander, Jouni
2025-10-10 13:01 ` Nautiyal, Ankit K
2025-10-09 9:00 ` [PATCH 5/8] drm/i915/display: Check if final vblank is sufficient for PSR features Ankit Nautiyal
2025-10-10 6:53 ` Hogander, Jouni [this message]
2025-10-10 13:42 ` Nautiyal, Ankit K
2025-10-13 10:57 ` Hogander, Jouni
2025-10-13 12:29 ` Nautiyal, Ankit K
2025-10-09 9:01 ` [PATCH 6/8] drm/i915/vrr: Recompute vblank_start for platforms with always-on VRR TG Ankit Nautiyal
2025-10-09 9:01 ` [PATCH 7/8] drm/i915/display: Add vblank_start adjustment logic for " Ankit Nautiyal
2025-10-10 15:05 ` Ville Syrjälä
2025-10-13 2:23 ` Nautiyal, Ankit K
2025-10-09 9:01 ` [PATCH 8/8] drm/i915/display: Prepare for vblank_delay for LRR Ankit Nautiyal
2025-10-09 11:04 ` ✓ i915.CI.BAT: success for Preparatory patches for guardband optimization (rev2) Patchwork
2025-10-09 17:03 ` ✗ i915.CI.Full: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2025-10-09 7:17 [PATCH 0/8] Preparatory patches for guardband optimization Ankit Nautiyal
2025-10-09 7:17 ` [PATCH 5/8] drm/i915/display: Check if final vblank is sufficient for PSR features Ankit Nautiyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9178808c08ec3e7dd1e7bc7cd36d8b4f977a2711.camel@intel.com \
--to=jouni.hogander@intel.com \
--cc=animesh.manna@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).