From: Paulo Zanoni <przanoni@gmail.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/6] drm/i915: don't restore LVDS enable state blindly v2
Date: Tue, 19 Feb 2013 17:39:49 -0300 [thread overview]
Message-ID: <CA+gsUGTbjQdQK5DjXh2pqRGaHy1g0UiRkGiZpJR_nsGAdhBbRw@mail.gmail.com> (raw)
In-Reply-To: <1361304703-2869-2-git-send-email-jbarnes@virtuousgeek.org>
Hi
2013/2/19 Jesse Barnes <jbarnes@virtuousgeek.org>:
> We still rely on a few LVDS bits, but restoring the enable bit can cause
> trouble at this point, so don't.
>
> v2: use the right mask to prevent restore (Daniel)
> conditionalize on KMS support (Denial)
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Briefly tested on SNB, and it still works.
> ---
> drivers/gpu/drm/i915/i915_suspend.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
> index 2135f21..c1e02b0 100644
> --- a/drivers/gpu/drm/i915/i915_suspend.c
> +++ b/drivers/gpu/drm/i915/i915_suspend.c
> @@ -255,6 +255,7 @@ static void i915_save_display(struct drm_device *dev)
> static void i915_restore_display(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> + u32 mask = 0xffffffff;
>
> /* Display arbitration */
> if (INTEL_INFO(dev)->gen <= 4)
> @@ -267,10 +268,13 @@ static void i915_restore_display(struct drm_device *dev)
> if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
> I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
>
> + if (drm_core_check_feature(dev, DRIVER_MODESET))
> + mask = ~LVDS_PORT_EN;
> +
> if (HAS_PCH_SPLIT(dev)) {
> - I915_WRITE(PCH_LVDS, dev_priv->regfile.saveLVDS);
> + I915_WRITE(PCH_LVDS, dev_priv->regfile.saveLVDS & mask);
> } else if (IS_MOBILE(dev) && !IS_I830(dev))
> - I915_WRITE(LVDS, dev_priv->regfile.saveLVDS);
> + I915_WRITE(LVDS, dev_priv->regfile.saveLVDS & mask);
>
> if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
> I915_WRITE(PFIT_CONTROL, dev_priv->regfile.savePFIT_CONTROL);
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
next prev parent reply other threads:[~2013-02-19 20:39 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 20:11 VT switchless suspend/resume Jesse Barnes
2013-02-19 20:11 ` [PATCH 1/6] drm/i915: don't restore LVDS enable state blindly v2 Jesse Barnes
2013-02-19 20:39 ` Paulo Zanoni [this message]
2013-02-19 21:35 ` Daniel Vetter
2013-02-19 20:11 ` [PATCH 2/6] drm/i915: add sprite restore function v3 Jesse Barnes
2013-02-19 20:11 ` [PATCH 3/6] drm/i915: restore cursor and sprite state when forcing a config restore Jesse Barnes
2013-02-19 20:11 ` [PATCH 4/6] drm/i915: enable VT switchless resume v2 Jesse Barnes
2013-03-18 7:49 ` Daniel Vetter
2013-03-18 17:42 ` Jesse Barnes
2013-03-18 18:50 ` Daniel Vetter
2013-03-19 16:56 ` Jesse Barnes
2013-03-19 17:13 ` Daniel Vetter
2013-03-26 12:14 ` Daniel Vetter
2013-03-26 15:35 ` Jesse Barnes
2013-02-19 20:11 ` [PATCH 5/6] drm/i915: emit a hotplug event on resume Jesse Barnes
2013-02-19 20:11 ` [PATCH 6/6] drm/i915: remove disabled memset of framebuffer from intel_fb Jesse Barnes
2013-02-19 21:17 ` Paulo Zanoni
2013-03-04 22:04 ` Daniel Vetter
2013-02-19 21:25 ` VT switchless suspend/resume Paulo Zanoni
2013-02-25 19:19 ` Paulo Zanoni
2013-02-25 21:31 ` Jesse Barnes
2013-03-07 16:38 ` Jesse Barnes
-- strict thread matches above, loose matches on Subject: below --
2013-02-15 21:23 VT switchless v3 Jesse Barnes
2013-02-15 21:23 ` [PATCH 1/6] drm/i915: don't restore LVDS enable state blindly v2 Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+gsUGTbjQdQK5DjXh2pqRGaHy1g0UiRkGiZpJR_nsGAdhBbRw@mail.gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).