From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <intel-xe@lists.freedesktop.org>,
<intel-gfx@lists.freedesktop.org>, <Maarten@mblankhorst.nl>,
<Lankhorst@mblankhorst.nl>, <dev@lankhorst.se>
Subject: Re: [PATCH 4/9] drm/xe: Defer irq init until after xe_display_init_noaccel
Date: Tue, 12 Nov 2024 13:21:29 -0500 [thread overview]
Message-ID: <ZzOcqVzaTliyfII3@intel.com> (raw)
In-Reply-To: <20241107100140.292928-4-maarten.lankhorst@linux.intel.com>
On Thu, Nov 07, 2024 at 11:01:35AM +0100, Maarten Lankhorst wrote:
> Technically, I believe this means that xe_display_init_noirq and
> xe_display_init_noaccel can be merged together now.
Please use the commit message to explain what you are doing and why
instead of telling what could be done next.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Link: https://patchwork.freedesktop.org/patch/msgid/20241105121857.17389-4-maarten.lankhorst@linux.intel.com
> Signed-off-by: Maarten Lankhorst,,, <dev@lankhorst.se>
same extra commas in your signature...
> ---
> drivers/gpu/drm/xe/xe_device.c | 12 ++++--------
> drivers/gpu/drm/xe/xe_tile.c | 7 +++++++
> 2 files changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
> index cef782f244e1a..b9948b2dc8d1d 100644
> --- a/drivers/gpu/drm/xe/xe_device.c
> +++ b/drivers/gpu/drm/xe/xe_device.c
> @@ -41,7 +41,6 @@
> #include "xe_hw_engine_group.h"
> #include "xe_hwmon.h"
> #include "xe_irq.h"
> -#include "xe_memirq.h"
> #include "xe_mmio.h"
> #include "xe_module.h"
> #include "xe_observation.h"
> @@ -673,9 +672,6 @@ int xe_device_probe(struct xe_device *xe)
> err = xe_ggtt_init_early(tile->mem.ggtt);
> if (err)
> return err;
> - err = xe_memirq_init(&tile->memirq);
> - if (err)
> - return err;
> }
>
> for_each_gt(gt, xe, id) {
> @@ -695,10 +691,6 @@ int xe_device_probe(struct xe_device *xe)
> if (err)
> return err;
>
> - err = xe_irq_install(xe);
> - if (err)
> - goto err;
> -
> err = probe_has_flat_ccs(xe);
> if (err)
> goto err;
> @@ -736,6 +728,10 @@ int xe_device_probe(struct xe_device *xe)
> goto err;
> }
>
> + err = xe_irq_install(xe);
> + if (err)
> + goto err;
> +
> for_each_gt(gt, xe, id) {
> last_gt = id;
>
> diff --git a/drivers/gpu/drm/xe/xe_tile.c b/drivers/gpu/drm/xe/xe_tile.c
> index 2825553b568f7..d07c1fba793ca 100644
> --- a/drivers/gpu/drm/xe/xe_tile.c
> +++ b/drivers/gpu/drm/xe/xe_tile.c
> @@ -10,6 +10,7 @@
> #include "xe_device.h"
> #include "xe_ggtt.h"
> #include "xe_gt.h"
> +#include "xe_memirq.h"
> #include "xe_migrate.h"
> #include "xe_pcode.h"
> #include "xe_sa.h"
> @@ -179,6 +180,12 @@ int xe_tile_init_noalloc(struct xe_tile *tile)
>
> int xe_tile_init(struct xe_tile *tile)
> {
> + int err;
> +
> + err = xe_memirq_init(&tile->memirq);
> + if (err)
> + return err;
> +
> tile->mem.kernel_bb_pool = xe_sa_bo_manager_init(tile, SZ_1M, 16);
> if (IS_ERR(tile->mem.kernel_bb_pool))
> return PTR_ERR(tile->mem.kernel_bb_pool);
> --
> 2.45.2
>
next prev parent reply other threads:[~2024-11-12 18:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 10:01 [PATCH 1/9] drm/xe: Remove double pageflip Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 2/9] drm/xe/display: Add intel_plane_initial_vblank_wait Maarten Lankhorst
2024-11-07 11:36 ` [PATCH] " Maarten Lankhorst
2024-11-07 12:21 ` Ville Syrjälä
2024-11-07 17:45 ` Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 3/9] drm/xe: Move suballocator init to after display init Maarten Lankhorst
2024-11-12 18:18 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 4/9] drm/xe: Defer irq init until after xe_display_init_noaccel Maarten Lankhorst
2024-11-12 18:21 ` Rodrigo Vivi [this message]
2024-11-07 10:01 ` [PATCH 5/9] drm/xe/display: Use a single early init call for display Maarten Lankhorst
2024-11-12 18:39 ` Rodrigo Vivi
2024-11-13 10:30 ` Maarten Lankhorst
2024-11-14 16:05 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 6/9] drm/xe/sriov: Move VF bootstrap and query_config to vf_guc_init Maarten Lankhorst
2024-11-14 16:09 ` Rodrigo Vivi
2024-11-15 14:21 ` Maarten Lankhorst
2024-11-15 19:06 ` Rodrigo Vivi
2024-11-15 19:50 ` Maarten Lankhorst
2024-11-15 20:02 ` Rodrigo Vivi
2024-11-15 20:51 ` Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 7/9] drm/xe: Simplify GuC early initialisation Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 8/9] drm/xe: Make it possible to read instance0 MCR registers after xe_gt_mcr_init_early Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 9/9] drm/xe: Split init of xe_gt_init_hwconfig to xe_gt_init and *_early Maarten Lankhorst
2024-11-07 10:16 ` ✗ Fi.CI.BUILD: failure for series starting with [1/9] drm/xe: Remove double pageflip Patchwork
2024-11-07 12:23 ` ✓ Fi.CI.BAT: success for series starting with [1/9] drm/xe: Remove double pageflip (rev2) Patchwork
2024-11-07 12:23 ` ✗ Fi.CI.SPARSE: warning " Patchwork
2024-11-07 13:57 ` ✗ Fi.CI.IGT: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2024-11-05 12:18 [PATCH 1/9] drm/xe: Remove double pageflip Maarten Lankhorst
2024-11-05 12:18 ` [PATCH 4/9] drm/xe: Defer irq init until after xe_display_init_noaccel Maarten Lankhorst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZzOcqVzaTliyfII3@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=Lankhorst@mblankhorst.nl \
--cc=Maarten@mblankhorst.nl \
--cc=dev@lankhorst.se \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).