Re: [PATCH 10/16] drm/i915: Set scaler mode for NV12

["Sharma, Shashank" <shashank.sharma@intel.com>]

Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>

Regards
Shashank
On 2/21/2018 3:50 PM, Vidya Srinivas wrote:
> From: Chandra Konduru <chandra.konduru@intel.com>
>
> This patch sets appropriate scaler mode for NV12 format.
> In this mode, skylake scaler does either chroma-upsampling or
> chroma-upsampling and resolution scaling
>
> v2: Review comments from Ville addressed
> NV12 case to be checked first for setting
> the scaler
>
> v3: Rebased (me)
>
> v4: Rebased (me)
>
> v5: Missed the Tested-by/Reviewed-by in the previous series
> Adding the same to commit message in this version.
>
> v6: Rebased (me)
>
> v7: Rebased (me)
>
> v8: Rebased (me)
> Restricting the NV12 change for scaler to BXT and KBL
> in this series.
>
> v9: Rebased (me)
>
> v10: As of now, NV12 has been tested on Gen9 and Gen10. However,
> code is applicable to all GEN >= 9. Hence making
> that change to keep it generic.
> Comments under v8 is not valid anymore.
>
> v11: Addressed review comments by Shashank Sharma.
> For Gen10+, the scaler mode to be set it planar or normal
> (single bit). Changed the code to be applicable to all
> Gen.
>
> v12: Addressed review comments from Shashank Sharma
> For Gen9 (apart from GLK) bits 28:29 to be programmed
> in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set
> for all Planar.
>
> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
> ---
>   drivers/gpu/drm/i915/i915_reg.h     |  2 ++
>   drivers/gpu/drm/i915/intel_atomic.c | 13 +++++++++++--
>   2 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1412abc..4349d81 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6732,6 +6732,8 @@ enum {
>   #define PS_SCALER_MODE_MASK (3 << 28)
>   #define PS_SCALER_MODE_DYN  (0 << 28)
>   #define PS_SCALER_MODE_HQ  (1 << 28)
> +#define SKL_PS_SCALER_MODE_NV12 (2 << 28)
> +#define PS_SCALER_MODE_PLANAR (1 << 29)
>   #define PS_PLANE_SEL_MASK  (7 << 25)
>   #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
>   #define PS_FILTER_MASK         (3 << 23)
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index e9fb6920..5b2ae8c 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -328,8 +328,17 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
>   		}
>   
>   		/* set scaler mode */
> -		if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
> -			scaler_state->scalers[*scaler_id].mode = 0;
> +		if ((INTEL_GEN(dev_priv) >= 9) &&
> +		    plane_state && plane_state->base.fb &&
> +		    plane_state->base.fb->format->format ==
> +		    DRM_FORMAT_NV12) {
> +			if (INTEL_GEN(dev_priv) == 9 &&
> +			    !IS_GEMINILAKE(dev_priv))
> +				scaler_state->scalers[*scaler_id].mode =
> +					SKL_PS_SCALER_MODE_NV12;
> +			else
> +				scaler_state->scalers[*scaler_id].mode =
> +					PS_SCALER_MODE_PLANAR;
>   		} else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
>   			/*
>   			 * when only 1 scaler is in use on either pipe A or B,

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx