From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Kaiser Subject: Re: Sandy Bridge (i7/H67) and connected screens Date: Fri, 04 Mar 2011 22:38:48 +0100 Message-ID: References: <1bdc18$jp5hb6@fmsmga002.fm.intel.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030007070101040708050702" Return-path: Received: from lo.gmane.org (lo.gmane.org [80.91.229.12]) by gabe.freedesktop.org (Postfix) with ESMTP id 123429E79C for ; Fri, 4 Mar 2011 13:39:09 -0800 (PST) Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1PvciK-0003m5-4X for intel-gfx@lists.freedesktop.org; Fri, 04 Mar 2011 22:39:08 +0100 Received: from 91-113-89-139.adsl.highway.telekom.at ([91.113.89.139]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 04 Mar 2011 22:39:08 +0100 Received: from kairo by 91-113-89-139.adsl.highway.telekom.at with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 04 Mar 2011 22:39:08 +0100 In-Reply-To: <1bdc18$jp5hb6@fmsmga002.fm.intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org This is a multi-part message in MIME format. --------------030007070101040708050702 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Chris, Just in case it might help, I'm sending another set of logs with both connectors connected to monitors - I see GMBUS failures being reported there as you expected. Robert Kaiser --------------030007070101040708050702 Content-Type: text/plain; name="Xorg.0.log.intel-2011-03-04-both" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="Xorg.0.log.intel-2011-03-04-both" [ 57.374] X.Org X Server 1.9.3 Release Date: 2010-12-13 [ 57.389] X Protocol Version 11, Revision 0 [ 57.389] Build Operating System: openSUSE SUSE LINUX [ 57.389] Current Operating System: Linux robert.box.kairo.at 2.6.38-rc6-17-desktop #1 SMP PREEMPT 2011-03-02 09:02:40 +0100 x86_64 [ 57.389] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe [ 57.389] Build Date: 27 February 2011 12:43:43PM [ 57.389] [ 57.389] Current version of pixman: 0.20.0 [ 57.389] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 57.389] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 57.389] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 4 22:25:35 2011 [ 57.623] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 57.707] (==) No Layout section. Using the first Screen section. [ 57.707] (**) |-->Screen "Default Screen 0" (0) [ 57.707] (**) | |-->Monitor "Default Monitor 0" [ 57.707] (**) | |-->Device "Default Device 0" [ 57.707] (==) Automatically adding devices [ 57.707] (==) Automatically enabling devices [ 57.857] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 57.857] Entry deleted from font path. [ 57.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 57.857] Entry deleted from font path. [ 58.272] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 58.272] Entry deleted from font path. [ 58.368] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/ [ 58.368] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 58.368] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 58.368] (II) Loader magic: 0x7dc740 [ 58.368] (II) Module ABI versions: [ 58.368] X.Org ANSI C Emulation: 0.4 [ 58.368] X.Org Video Driver: 8.0 [ 58.368] X.Org XInput driver : 11.0 [ 58.368] X.Org Server Extension : 4.0 [ 58.369] (--) PCI:*(0:0:2:0) 8086:0122:8086:2003 rev 9, Mem @ 0xfe000000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 58.369] (--) PCI: (0:2:2:0) 109e:036e:0070:13eb rev 17, Mem @ 0xf0001000/4096 [ 58.369] (II) Open ACPI successful (/var/run/acpid.socket) [ 58.369] (II) LoadModule: "extmod" [ 58.476] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 58.573] (II) Module extmod: vendor="X.Org Foundation" [ 58.573] compiled for 1.9.3, module version = 1.0.0 [ 58.573] Module class: X.Org Server Extension [ 58.573] ABI class: X.Org Server Extension, version 4.0 [ 58.573] (II) Loading extension MIT-SCREEN-SAVER [ 58.573] (II) Loading extension XFree86-VidModeExtension [ 58.573] (II) Loading extension XFree86-DGA [ 58.573] (II) Loading extension DPMS [ 58.573] (II) Loading extension XVideo [ 58.573] (II) Loading extension XVideo-MotionCompensation [ 58.573] (II) Loading extension X-Resource [ 58.573] (II) LoadModule: "dbe" [ 58.573] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 58.661] (II) Module dbe: vendor="X.Org Foundation" [ 58.661] compiled for 1.9.3, module version = 1.0.0 [ 58.661] Module class: X.Org Server Extension [ 58.661] ABI class: X.Org Server Extension, version 4.0 [ 58.661] (II) Loading extension DOUBLE-BUFFER [ 58.661] (II) LoadModule: "glx" [ 58.661] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 58.728] (II) Module glx: vendor="X.Org Foundation" [ 58.728] compiled for 1.9.3, module version = 1.0.0 [ 58.728] ABI class: X.Org Server Extension, version 4.0 [ 58.728] (==) AIGLX enabled [ 58.728] (II) Loading extension GLX [ 58.728] (II) LoadModule: "record" [ 58.728] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 58.799] (II) Module record: vendor="X.Org Foundation" [ 58.799] compiled for 1.9.3, module version = 1.13.0 [ 58.799] Module class: X.Org Server Extension [ 58.799] ABI class: X.Org Server Extension, version 4.0 [ 58.799] (II) Loading extension RECORD [ 58.799] (II) LoadModule: "dri" [ 58.799] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 59.139] (II) Module dri: vendor="X.Org Foundation" [ 59.139] compiled for 1.9.3, module version = 1.0.0 [ 59.139] ABI class: X.Org Server Extension, version 4.0 [ 59.139] (II) Loading extension XFree86-DRI [ 59.139] (II) LoadModule: "dri2" [ 59.139] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 59.196] (II) Module dri2: vendor="X.Org Foundation" [ 59.196] compiled for 1.9.3, module version = 1.2.0 [ 59.196] ABI class: X.Org Server Extension, version 4.0 [ 59.196] (II) Loading extension DRI2 [ 59.196] (==) Matched intel as autoconfigured driver 0 [ 59.196] (==) Matched fbdev as autoconfigured driver 1 [ 59.196] (==) Matched vesa as autoconfigured driver 2 [ 59.196] (==) Assigned the driver to the xf86ConfigLayout [ 59.196] (II) LoadModule: "intel" [ 59.439] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 59.579] (II) Module intel: vendor="X.Org Foundation" [ 59.579] compiled for 1.9.3, module version = 2.14.0 [ 59.579] Module class: X.Org Video Driver [ 59.579] ABI class: X.Org Video Driver, version 8.0 [ 59.579] (II) LoadModule: "fbdev" [ 59.580] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 59.632] (II) Module fbdev: vendor="X.Org Foundation" [ 59.632] compiled for 1.9.3, module version = 0.4.2 [ 59.632] ABI class: X.Org Video Driver, version 8.0 [ 59.632] (II) LoadModule: "vesa" [ 59.741] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 59.783] (II) Module vesa: vendor="X.Org Foundation" [ 59.783] compiled for 1.9.3, module version = 2.3.0 [ 59.783] Module class: X.Org Video Driver [ 59.783] ABI class: X.Org Video Driver, version 8.0 [ 59.783] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 59.784] (II) FBDEV: driver for framebuffer: fbdev [ 59.784] (II) VESA: driver for VESA chipsets: vesa [ 59.784] (++) using VT number 7 [ 59.787] (WW) Falling back to old probe method for fbdev [ 59.787] (II) Loading sub module "fbdevhw" [ 59.787] (II) LoadModule: "fbdevhw" [ 60.059] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 60.099] (II) Module fbdevhw: vendor="X.Org Foundation" [ 60.099] compiled for 1.9.3, module version = 0.0.2 [ 60.099] ABI class: X.Org Video Driver, version 8.0 [ 60.099] (WW) Falling back to old probe method for vesa [ 60.099] drmOpenDevice: node name is /dev/dri/card0 [ 60.099] drmOpenDevice: open result is 9, (OK) [ 60.099] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 60.099] drmOpenDevice: node name is /dev/dri/card0 [ 60.099] drmOpenDevice: open result is 9, (OK) [ 60.099] drmOpenByBusid: drmOpenMinor returns 9 [ 60.099] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 60.099] (II) intel(0): Creating default Display subsection in Screen section "Default Screen 0" for depth/fbbpp 24/32 [ 60.099] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 60.099] (==) intel(0): RGB weight 888 [ 60.099] (==) intel(0): Default visual is TrueColor [ 60.099] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge [ 60.099] (--) intel(0): Chipset: "Sandybridge" [ 60.099] (**) intel(0): Tiling enabled [ 60.099] (**) intel(0): SwapBuffers wait disabled [ 60.099] (==) intel(0): video overlay key set to 0x101fe [ 60.099] (II) intel(0): Output VGA1 using monitor section Default Monitor 0 [ 60.210] (II) intel(0): Output HDMI1 has no monitor section [ 60.211] (II) intel(0): Output DP1 has no monitor section [ 60.315] (II) intel(0): Output HDMI2 has no monitor section [ 60.316] (II) intel(0): Output DP2 has no monitor section [ 60.316] (II) intel(0): EDID for output VGA1 [ 60.428] (II) intel(0): EDID for output HDMI1 [ 60.429] (II) intel(0): EDID for output DP1 [ 60.533] (II) intel(0): EDID for output HDMI2 [ 60.534] (II) intel(0): EDID for output DP2 [ 60.534] (II) intel(0): Output VGA1 disconnected [ 60.534] (II) intel(0): Output HDMI1 disconnected [ 60.534] (II) intel(0): Output DP1 disconnected [ 60.534] (II) intel(0): Output HDMI2 disconnected [ 60.534] (II) intel(0): Output DP2 disconnected [ 60.534] (WW) intel(0): No outputs definitely connected, trying again... [ 60.534] (II) intel(0): Output VGA1 disconnected [ 60.534] (II) intel(0): Output HDMI1 disconnected [ 60.534] (II) intel(0): Output DP1 disconnected [ 60.534] (II) intel(0): Output HDMI2 disconnected [ 60.534] (II) intel(0): Output DP2 disconnected [ 60.534] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 60.534] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 60.534] (II) intel(0): Kernel page flipping support detected, enabling [ 60.534] (==) intel(0): DPI set to (96, 96) [ 60.534] (II) Loading sub module "fb" [ 60.534] (II) LoadModule: "fb" [ 60.534] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 60.664] (II) Module fb: vendor="X.Org Foundation" [ 60.664] compiled for 1.9.3, module version = 1.0.0 [ 60.664] ABI class: X.Org ANSI C Emulation, version 0.4 [ 60.664] (II) UnloadModule: "fbdev" [ 60.664] (II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 60.664] (II) UnloadModule: "fbdevhw" [ 60.664] (II) Unloading /usr/lib64/xorg/modules/libfbdevhw.so [ 60.664] (II) UnloadModule: "vesa" [ 60.664] (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 60.664] (==) Depth 24 pixmap format is 32 bpp [ 60.664] (==) intel(0): VideoRam: 262144 KB [ 60.664] (II) intel(0): [DRI2] Setup complete [ 60.664] (II) intel(0): [DRI2] DRI driver: i965 [ 60.664] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 60.665] (II) UXA(0): Driver registered support for the following operations: [ 60.665] (II) solid [ 60.665] (II) copy [ 60.665] (II) composite (RENDER acceleration) [ 60.665] (II) put_image [ 60.665] (II) get_image [ 60.665] (==) intel(0): Backing store disabled [ 60.665] (==) intel(0): Silken mouse enabled [ 60.665] (II) intel(0): Initializing HW Cursor [ 60.665] (EE) intel(0): Couldn't find an fbcon .(EE) intel(0): Couldn't create pixmap for fbcon [ 60.665] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 60.665] (==) intel(0): DPMS enabled [ 60.665] (==) intel(0): Intel XvMC decoder enabled [ 60.665] (II) intel(0): Set up textured video [ 60.665] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 60.665] (II) intel(0): direct rendering: DRI2 Enabled [ 60.665] (WW) intel(0): Option "HWCursor" is not used [ 60.665] (--) RandR disabled [ 60.665] (II) Initializing built-in extension Generic Event Extension [ 60.665] (II) Initializing built-in extension SHAPE [ 60.665] (II) Initializing built-in extension MIT-SHM [ 60.665] (II) Initializing built-in extension XInputExtension [ 60.665] (II) Initializing built-in extension XTEST [ 60.665] (II) Initializing built-in extension BIG-REQUESTS [ 60.665] (II) Initializing built-in extension SYNC [ 60.665] (II) Initializing built-in extension XKEYBOARD [ 60.665] (II) Initializing built-in extension XC-MISC [ 60.665] (II) Initializing built-in extension SECURITY [ 60.665] (II) Initializing built-in extension XINERAMA [ 60.665] (II) Initializing built-in extension XFIXES [ 60.665] (II) Initializing built-in extension RENDER [ 60.665] (II) Initializing built-in extension RANDR [ 60.665] (II) Initializing built-in extension COMPOSITE [ 60.665] (II) Initializing built-in extension DAMAGE [ 61.026] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 61.026] (II) AIGLX: enabled GLX_INTEL_swap_event [ 61.026] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 61.026] (II) AIGLX: enabled GLX_SGI_make_current_read [ 61.026] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 61.026] (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so [ 61.026] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 62.211] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm [ 62.442] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 62.442] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 62.442] (**) Power Button: Applying InputClass "LocalKeyboard" [ 62.442] (II) LoadModule: "evdev" [ 62.442] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 62.574] (II) Module evdev: vendor="X.Org Foundation" [ 62.574] compiled for 1.9.3, module version = 2.6.0 [ 62.574] Module class: X.Org XInput Driver [ 62.574] ABI class: X.Org XInput driver, version 11.0 [ 62.574] (**) Power Button: always reports core events [ 62.574] (**) Power Button: Device: "/dev/input/event4" [ 62.580] (--) Power Button: Found keys [ 62.580] (II) Power Button: Configuring as keyboard [ 62.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 62.580] (**) Option "xkb_rules" "evdev" [ 62.580] (**) Option "xkb_model" "evdev" [ 62.580] (**) Option "xkb_layout" "de" [ 62.580] (**) Option "xkb_variant" "nodeadkeys" [ 62.609] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-90BEB0384DFE894FC6C76430E8611BB0119B95EE.xkm [ 62.661] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 62.661] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 62.661] (**) Power Button: Applying InputClass "LocalKeyboard" [ 62.661] (**) Power Button: always reports core events [ 62.661] (**) Power Button: Device: "/dev/input/event3" [ 62.670] (--) Power Button: Found keys [ 62.670] (II) Power Button: Configuring as keyboard [ 62.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 62.670] (**) Option "xkb_rules" "evdev" [ 62.670] (**) Option "xkb_model" "evdev" [ 62.670] (**) Option "xkb_layout" "de" [ 62.670] (**) Option "xkb_variant" "nodeadkeys" [ 62.671] (II) config/udev: Adding input device QUANTA Optical Touch Screen (/dev/input/event7) [ 62.671] (**) QUANTA Optical Touch Screen: Applying InputClass "evdev touchscreen catchall" [ 62.671] (**) QUANTA Optical Touch Screen: always reports core events [ 62.671] (**) QUANTA Optical Touch Screen: Device: "/dev/input/event7" [ 62.678] (--) QUANTA Optical Touch Screen: Found absolute axes [ 62.678] (--) QUANTA Optical Touch Screen: Found x and y absolute axes [ 62.678] (--) QUANTA Optical Touch Screen: Found absolute touchscreen [ 62.678] (II) QUANTA Optical Touch Screen: Configuring as touchscreen [ 62.678] (**) QUANTA Optical Touch Screen: YAxisMapping: buttons 4 and 5 [ 62.678] (**) QUANTA Optical Touch Screen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 62.678] (II) XINPUT: Adding extended input device "QUANTA Optical Touch Screen" (type: TOUCHSCREEN) [ 62.678] (II) QUANTA Optical Touch Screen: initialized for absolute axes. [ 62.678] (II) config/udev: Adding input device QUANTA Optical Touch Screen (/dev/input/mouse1) [ 62.678] (II) No input driver/identifier specified (ignoring) [ 62.678] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event1) [ 62.678] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall" [ 62.678] (**) HID 046a:0023: Applying InputClass "LocalKeyboard" [ 62.678] (**) HID 046a:0023: always reports core events [ 62.678] (**) HID 046a:0023: Device: "/dev/input/event1" [ 62.686] (--) HID 046a:0023: Found keys [ 62.686] (II) HID 046a:0023: Configuring as keyboard [ 62.686] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD) [ 62.686] (**) Option "xkb_rules" "evdev" [ 62.686] (**) Option "xkb_model" "evdev" [ 62.686] (**) Option "xkb_layout" "de" [ 62.686] (**) Option "xkb_variant" "nodeadkeys" [ 62.686] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event2) [ 62.686] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall" [ 62.686] (**) HID 046a:0023: Applying InputClass "LocalKeyboard" [ 62.686] (**) HID 046a:0023: always reports core events [ 62.686] (**) HID 046a:0023: Device: "/dev/input/event2" [ 62.696] (--) HID 046a:0023: Found 1 mouse buttons [ 62.696] (--) HID 046a:0023: Found scroll wheel(s) [ 62.696] (--) HID 046a:0023: Found relative axes [ 62.696] (--) HID 046a:0023: Found absolute axes [ 62.696] (--) HID 046a:0023: Found keys [ 62.696] (II) HID 046a:0023: Configuring as mouse [ 62.696] (II) HID 046a:0023: Configuring as keyboard [ 62.696] (II) HID 046a:0023: Adding scrollwheel support [ 62.696] (**) HID 046a:0023: YAxisMapping: buttons 4 and 5 [ 62.696] (**) HID 046a:0023: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 62.696] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD) [ 62.696] (**) Option "xkb_rules" "evdev" [ 62.696] (**) Option "xkb_model" "evdev" [ 62.696] (**) Option "xkb_layout" "de" [ 62.696] (**) Option "xkb_variant" "nodeadkeys" [ 62.696] (EE) HID 046a:0023: failed to initialize for relative axes. [ 62.696] (II) HID 046a:0023: initialized for absolute axes. [ 62.696] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0) [ 62.696] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" [ 62.696] (**) Logitech USB-PS/2 Optical Mouse: always reports core events [ 62.696] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0" [ 62.703] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons [ 62.703] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) [ 62.703] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes [ 62.703] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes [ 62.703] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse [ 62.703] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 62.703] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0 [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000 [ 62.703] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4 [ 62.703] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. [ 62.703] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0) [ 62.703] (II) No input driver/identifier specified (ignoring) [ 62.703] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6) [ 62.703] (II) No input driver/identifier specified (ignoring) [ 62.708] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 62.708] (II) No input driver/identifier specified (ignoring) --------------030007070101040708050702 Content-Type: text/plain; name="dmesg.intel-2011-03-04-both" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.intel-2011-03-04-both" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-rc6-17-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-03-02 09:02:40 +0100 [ 0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000da858000 (usable) [ 0.000000] BIOS-e820: 00000000da858000 - 00000000da8a7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000da8a7000 - 00000000da8af000 (ACPI data) [ 0.000000] BIOS-e820: 00000000da8af000 - 00000000dabc9000 (reserved) [ 0.000000] BIOS-e820: 00000000dabc9000 - 00000000dabca000 (usable) [ 0.000000] BIOS-e820: 00000000dabca000 - 00000000dabda000 (reserved) [ 0.000000] BIOS-e820: 00000000dabda000 - 00000000dabe7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dabe7000 - 00000000dac0c000 (reserved) [ 0.000000] BIOS-e820: 00000000dac0c000 - 00000000dac4f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dac4f000 - 00000000dae8a000 (reserved) [ 0.000000] BIOS-e820: 00000000dae8a000 - 00000000db000000 (usable) [ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000021fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: /DH67CL, BIOS BLH6710H.86A.0102.2011.0211.2236 02/11/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 21FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fcea0] fcea0 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000 [ 0.000000] 0000000000 - 00db000000 page 2M [ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000021fe00000 [ 0.000000] 0100000000 - 021fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 21fe00000 @ daff6000-db000000 [ 0.000000] RAMDISK: 1f6fd000 - 1fff0000 [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000da8a7068 0004C (v01 INTEL DH67CL 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000da8ae320 000F4 (v04 INTEL DH67CL 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000da8a7140 071DD (v02 INTEL DH67CL 00000012 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dabdef80 00040 [ 0.000000] ACPI: APIC 00000000da8ae418 00092 (v03 INTEL DH67CL 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000da8ae4b0 001D6 (v01 INTEL DH67CL 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000da8ae688 0003C (v01 INTEL DH67CL 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000da8ae6c8 00038 (v01 INTEL DH67CL 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000021fe00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000021fe00000 [ 0.000000] NODE_DATA [000000021fdec000 - 000000021fdfffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217c00000-ffff88021edfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0021fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000da858 [ 0.000000] 0: 0x000dabc9 -> 0x000dabca [ 0.000000] 0: 0x000dae8a -> 0x000db000 [ 0.000000] 0: 0x00100000 -> 0x0021fe00 [ 0.000000] On node 0 totalpages: 2073436 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 876039 pages, LIFO batch:31 [ 0.000000] Normal zone: 16121 pages used for memmap [ 0.000000] Normal zone: 1163015 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da858000 - 00000000da8a7000 [ 0.000000] PM: Registered nosave memory: 00000000da8a7000 - 00000000da8af000 [ 0.000000] PM: Registered nosave memory: 00000000da8af000 - 00000000dabc9000 [ 0.000000] PM: Registered nosave memory: 00000000dabca000 - 00000000dabda000 [ 0.000000] PM: Registered nosave memory: 00000000dabda000 - 00000000dabe7000 [ 0.000000] PM: Registered nosave memory: 00000000dabe7000 - 00000000dac0c000 [ 0.000000] PM: Registered nosave memory: 00000000dac0c000 - 00000000dac4f000 [ 0.000000] PM: Registered nosave memory: 00000000dac4f000 - 00000000dae8a000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000 [ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:1f31c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s79744 r8192 d22656 u262144 [ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042973 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8086488k/8910848k available (5283k kernel code, 617104k absent, 207256k reserved, 6172k data, 1028k init) [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 3392.513 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6785.02 BogoMIPS (lpj=3392513) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000044] Security Framework initialized [ 0.000053] AppArmor: AppArmor initialized [ 0.000554] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001787] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002280] Mount-cache hash table entries: 256 [ 0.002352] Initializing cgroup subsys ns [ 0.002354] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002355] Initializing cgroup subsys cpuacct [ 0.002357] Initializing cgroup subsys memory [ 0.002366] Initializing cgroup subsys devices [ 0.002367] Initializing cgroup subsys freezer [ 0.002368] Initializing cgroup subsys net_cls [ 0.002380] Initializing cgroup subsys blkio [ 0.002403] CPU: Physical Processor ID: 0 [ 0.002404] CPU: Processor Core ID: 0 [ 0.002407] mce: CPU supports 9 MCE banks [ 0.002417] CPU0: Thermal monitoring enabled (TM1) [ 0.002422] using mwait in idle threads. [ 0.003063] ACPI: Core revision 20110112 [ 0.236322] Setting APIC routing to flat [ 0.236673] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.246647] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07 [ 0.347386] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. [ 0.347390] ... version: 3 [ 0.347390] ... bit width: 48 [ 0.347391] ... generic registers: 4 [ 0.347392] ... value mask: 0000ffffffffffff [ 0.347393] ... max period: 000000007fffffff [ 0.347393] ... fixed-purpose events: 3 [ 0.347394] ... event mask: 000000070000000f [ 0.350472] NMI watchdog enabled, takes one hw-pmu counter. [ 0.354382] Booting Node 0, Processors #1 [ 0.445155] NMI watchdog enabled, takes one hw-pmu counter. [ 0.448110] #2 [ 0.538878] NMI watchdog enabled, takes one hw-pmu counter. [ 0.541827] #3 [ 0.632594] NMI watchdog enabled, takes one hw-pmu counter. [ 0.635546] #4 [ 0.726372] NMI watchdog enabled, takes one hw-pmu counter. [ 0.729268] #5 [ 0.820039] NMI watchdog enabled, takes one hw-pmu counter. [ 0.822985] #6 [ 0.913756] NMI watchdog enabled, takes one hw-pmu counter. [ 0.916706] #7 Ok. [ 1.007477] NMI watchdog enabled, takes one hw-pmu counter. [ 1.008413] Brought up 8 CPUs [ 1.008416] Total of 8 processors activated (54271.03 BogoMIPS). [ 1.012500] devtmpfs: initialized [ 1.013175] print_constraints: dummy: [ 1.013200] Time: 22:24:39 Date: 03/04/11 [ 1.013234] NET: Registered protocol family 16 [ 1.013336] ACPI: bus type pci registered [ 1.013387] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 1.013389] PCI: not using MMCONFIG [ 1.013390] PCI: Using configuration type 1 for base access [ 1.013998] bio: create slab at 0 [ 1.014902] ACPI: EC: Look up EC in DSDT [ 1.015883] ACPI: Executed 1 blocks of module-level executable AML code [ 1.018596] ACPI: SSDT 00000000dabe6898 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 1.018930] ACPI: Dynamic OEM Table Load: [ 1.018932] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 1.018961] ACPI: SSDT 00000000dabddd98 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 1.019181] ACPI: Dynamic OEM Table Load: [ 1.019182] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 1.020070] ACPI: Interpreter enabled [ 1.020072] ACPI: (supports S0 S3 S4 S5) [ 1.020084] ACPI: Using IOAPIC for interrupt routing [ 1.020101] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 1.020164] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 1.030479] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.037490] ACPI: No dock devices found. [ 1.037491] HEST: Table not found. [ 1.037493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.037714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.037938] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] [ 1.037939] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] [ 1.037941] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] [ 1.037942] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.037943] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.037944] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.037945] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xffffffff] [ 1.037953] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 1.037978] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300 [ 1.037985] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit] [ 1.037990] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.037993] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 1.038034] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.038055] pci 0000:00:16.0: reg 10: [mem 0xfe529000-0xfe52900f 64bit] [ 1.038111] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.038114] pci 0000:00:16.0: PME# disabled [ 1.038141] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200 [ 1.038157] pci 0000:00:19.0: reg 10: [mem 0xfe500000-0xfe51ffff] [ 1.038165] pci 0000:00:19.0: reg 14: [mem 0xfe528000-0xfe528fff] [ 1.038173] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 1.038218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.038222] pci 0000:00:19.0: PME# disabled [ 1.038244] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.038263] pci 0000:00:1a.0: reg 10: [mem 0xfe527000-0xfe5273ff] [ 1.038334] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.038338] pci 0000:00:1a.0: PME# disabled [ 1.038359] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.038373] pci 0000:00:1b.0: reg 10: [mem 0xfe520000-0xfe523fff 64bit] [ 1.038423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.038427] pci 0000:00:1b.0: PME# disabled [ 1.038445] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.038503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.038506] pci 0000:00:1c.0: PME# disabled [ 1.038528] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 1.038585] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.038589] pci 0000:00:1c.3: PME# disabled [ 1.038618] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.038637] pci 0000:00:1d.0: reg 10: [mem 0xfe526000-0xfe5263ff] [ 1.038705] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.038708] pci 0000:00:1d.0: PME# disabled [ 1.038730] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601 [ 1.038837] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106 [ 1.038853] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 1.038860] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 1.038868] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 1.038875] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 1.038882] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 1.038889] pci 0000:00:1f.2: reg 24: [mem 0xfe525000-0xfe5257ff] [ 1.038918] pci 0000:00:1f.2: PME# supported from D3hot [ 1.038921] pci 0000:00:1f.2: PME# disabled [ 1.038936] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.038950] pci 0000:00:1f.3: reg 10: [mem 0xfe524000-0xfe5240ff 64bit] [ 1.038969] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 1.039053] pci 0000:01:00.0: [1283:8892] type 1 class 0x000604 [ 1.039201] pci 0000:01:00.0: supports D1 D2 [ 1.039202] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.039209] pci 0000:01:00.0: PME# disabled [ 1.039242] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.039255] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 1.039259] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.039262] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.039268] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.039402] pci 0000:02:02.0: [109e:036e] type 0 class 0x000400 [ 1.039451] pci 0000:02:02.0: reg 10: [mem 0xf0001000-0xf0001fff pref] [ 1.039682] pci 0000:02:02.1: [109e:0878] type 0 class 0x000480 [ 1.039729] pci 0000:02:02.1: reg 10: [mem 0xf0000000-0xf0000fff pref] [ 1.040039] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 1.040052] pci 0000:01:00.0: bridge window [io 0xfff000-0x0000] (disabled) [ 1.040059] pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.040073] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.040151] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03 [ 1.040176] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit] [ 1.040278] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.040283] pci 0000:03:00.0: PME# disabled [ 1.042330] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.042336] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) [ 1.042342] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff] [ 1.042350] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.042373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.042503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.042528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR21._PRT] [ 1.042576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 1.042675] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.042801] pci0000:00: ACPI _OSC control (0x1d) granted [ 1.045653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.045689] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 1.045724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.045759] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.045793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.045828] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.045863] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.045897] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.046025] SCSI subsystem initialized [ 1.046048] libata version 3.00 loaded. [ 1.046081] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.046086] vgaarb: loaded [ 1.046102] usbcore: registered new interface driver usbfs [ 1.046109] usbcore: registered new interface driver hub [ 1.046124] usbcore: registered new device driver usb [ 1.046162] PCI: Using ACPI for IRQ routing [ 1.046164] PCI: pci_cache_line_size set to 64 bytes [ 1.046238] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 1.046240] reserve RAM buffer: 00000000da858000 - 00000000dbffffff [ 1.046242] reserve RAM buffer: 00000000dabca000 - 00000000dbffffff [ 1.046244] reserve RAM buffer: 00000000db000000 - 00000000dbffffff [ 1.046246] reserve RAM buffer: 000000021fe00000 - 000000021fffffff [ 1.046303] NetLabel: Initializing [ 1.046304] NetLabel: domain hash size = 128 [ 1.046305] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.046313] NetLabel: unlabeled traffic allowed by default [ 1.046322] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.046325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.048335] Switching to clocksource hpet [ 1.048401] Switched to NOHz mode on CPU #4 [ 1.049186] AppArmor: AppArmor Filesystem Enabled [ 1.049195] pnp: PnP ACPI init [ 1.049204] ACPI: bus type pnp registered [ 1.049288] Switched to NOHz mode on CPU #0 [ 1.049331] pnp 00:00: [bus 00-ff] [ 1.049333] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.049334] pnp 00:00: [io 0x0000-0x03af window] [ 1.049335] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 1.049336] pnp 00:00: [io 0x03b0-0x03df window] [ 1.049338] pnp 00:00: [io 0x0d00-0xffff window] [ 1.049339] Switched to NOHz mode on CPU #1 [ 1.049344] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.049346] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 1.049347] pnp 00:00: [mem 0xdfa00000-0xffffffff window] [ 1.049348] pnp 00:00: [mem 0x00000000 window] [ 1.049353] Switched to NOHz mode on CPU #3 [ 1.049355] Switched to NOHz mode on CPU #2 [ 1.049357] Switched to NOHz mode on CPU #7 [ 1.049358] Switched to NOHz mode on CPU #6 [ 1.049360] Switched to NOHz mode on CPU #5 [ 1.049380] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.049452] pnp 00:01: [mem 0xfed10000-0xfed19fff] [ 1.049453] pnp 00:01: [mem 0xf8000000-0xfbffffff] [ 1.049454] pnp 00:01: [mem 0xfed90000-0xfed93fff] [ 1.049455] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 1.049456] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 1.049482] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved [ 1.049484] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.049485] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.049487] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.049488] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved [ 1.049490] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.049566] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.049568] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.049569] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.049593] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.049854] pnp 00:03: [dma 4] [ 1.049855] pnp 00:03: [io 0x0000-0x000f] [ 1.049856] pnp 00:03: [io 0x0081-0x0083] [ 1.049857] pnp 00:03: [io 0x0087] [ 1.049858] pnp 00:03: [io 0x0089-0x008b] [ 1.049859] pnp 00:03: [io 0x008f] [ 1.049860] pnp 00:03: [io 0x00c0-0x00df] [ 1.049877] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.049884] pnp 00:04: [io 0x0070-0x0071] [ 1.049890] pnp 00:04: [irq 8] [ 1.049906] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.049912] pnp 00:05: [io 0x0061] [ 1.049926] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.049943] pnp 00:06: [io 0x0010-0x001f] [ 1.049945] pnp 00:06: [io 0x0022-0x003f] [ 1.049946] pnp 00:06: [io 0x0044-0x005f] [ 1.049946] pnp 00:06: [io 0x0062-0x0063] [ 1.049947] pnp 00:06: [io 0x0065-0x006f] [ 1.049948] pnp 00:06: [io 0x0072-0x007f] [ 1.049949] pnp 00:06: [io 0x0080] [ 1.049950] pnp 00:06: [io 0x0084-0x0086] [ 1.049951] pnp 00:06: [io 0x0088] [ 1.049952] pnp 00:06: [io 0x008c-0x008e] [ 1.049953] pnp 00:06: [io 0x0090-0x009f] [ 1.049954] pnp 00:06: [io 0x00a2-0x00bf] [ 1.049955] pnp 00:06: [io 0x00e0-0x00ef] [ 1.049956] pnp 00:06: [io 0x04d0-0x04d1] [ 1.049982] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.049984] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.049990] pnp 00:07: [io 0x00f0-0x00ff] [ 1.049994] pnp 00:07: [irq 13] [ 1.050009] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.050151] pnp 00:08: [io 0x0400-0x0453] [ 1.050152] pnp 00:08: [io 0x0458-0x047f] [ 1.050153] pnp 00:08: [io 0x1180-0x119f] [ 1.050154] pnp 00:08: [io 0x0500-0x057f] [ 1.050156] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 1.050157] pnp 00:08: [mem 0xfec00000-0xfecfffff] [ 1.050158] pnp 00:08: [mem 0xfed08000-0xfed08fff] [ 1.050159] pnp 00:08: [mem 0xff000000-0xffffffff] [ 1.050186] system 00:08: [io 0x0400-0x0453] has been reserved [ 1.050187] system 00:08: [io 0x0458-0x047f] has been reserved [ 1.050188] system 00:08: [io 0x1180-0x119f] has been reserved [ 1.050190] system 00:08: [io 0x0500-0x057f] has been reserved [ 1.050191] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.050193] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.050194] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.050196] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 1.050197] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.050228] pnp 00:09: [io 0x0454-0x0457] [ 1.050252] system 00:09: [io 0x0454-0x0457] has been reserved [ 1.050254] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.050345] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 1.050370] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.050492] pnp: PnP ACPI: found 11 devices [ 1.050493] ACPI: ACPI bus type pnp unregistered [ 1.056149] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 1.056151] pci 0000:01:00.0: bridge window [io disabled] [ 1.056161] pci 0000:01:00.0: bridge window [mem disabled] [ 1.056167] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.056181] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 1.056182] pci 0000:00:1c.0: bridge window [io disabled] [ 1.056186] pci 0000:00:1c.0: bridge window [mem disabled] [ 1.056189] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.056195] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.056196] pci 0000:00:1c.3: bridge window [io disabled] [ 1.056200] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff] [ 1.056204] pci 0000:00:1c.3: bridge window [mem pref disabled] [ 1.056218] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.056221] pci 0000:00:1c.0: setting latency timer to 64 [ 1.056233] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.056240] pci 0000:01:00.0: setting latency timer to 64 [ 1.056249] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.056253] pci 0000:00:1c.3: setting latency timer to 64 [ 1.056256] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 1.056257] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 1.056258] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 1.056259] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 1.056260] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 1.056261] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 1.056262] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff] [ 1.056264] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.056265] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.056266] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] [ 1.056336] NET: Registered protocol family 2 [ 1.056505] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.057190] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.058142] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.058257] TCP: Hash tables configured (established 524288 bind 65536) [ 1.058258] TCP reno registered [ 1.058267] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.058292] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.058422] NET: Registered protocol family 1 [ 1.058431] pci 0000:00:02.0: Boot video device [ 1.058533] PCI: CLS 64 bytes, default 64 [ 1.058562] Unpacking initramfs... [ 1.155690] Freeing initrd memory: 9164k freed [ 1.156466] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.156469] Placing 64MB software IO TLB between ffff88001b400000 - ffff88001f400000 [ 1.156470] software IO TLB at phys 0x1b400000 - 0x1f400000 [ 1.156990] Scanning for low memory corruption every 60 seconds [ 1.157131] audit: initializing netlink socket (disabled) [ 1.157139] type=2000 audit(1299277478.694:1): initialized [ 1.166674] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.167325] VFS: Disk quotas dquot_6.5.2 [ 1.167352] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.167516] msgmni has been set to 3952 [ 1.167650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.167652] io scheduler noop registered [ 1.167653] io scheduler deadline registered [ 1.167677] io scheduler cfq registered (default) [ 1.167760] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.167803] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.167865] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.167902] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X [ 1.167981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.167982] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.167983] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 1.167984] pci 0000:02:02.1: Signaling PME through PCIe PME interrupt [ 1.167988] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.168002] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.168003] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.168007] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.168060] intel_idle: MWAIT substates: 0x1120 [ 1.168061] intel_idle: v0.4 model 0x2A [ 1.168062] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.168098] ERST: Table is not found! [ 1.168134] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.295994] Non-volatile memory driver v1.3 [ 1.295996] Linux agpgart interface v0.103 [ 1.296038] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.296136] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.297429] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.297521] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.297569] i2c-core: driver [adp5520] using legacy suspend method [ 1.297570] i2c-core: driver [adp5520] using legacy resume method [ 1.297616] ahci 0000:00:1f.2: version 3.0 [ 1.297627] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.297662] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.307731] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.307735] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 1.307742] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.318083] scsi0 : ahci [ 1.318158] scsi1 : ahci [ 1.318201] scsi2 : ahci [ 1.318243] scsi3 : ahci [ 1.318287] scsi4 : ahci [ 1.318330] scsi5 : ahci [ 1.318457] ata1: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525100 irq 42 [ 1.318459] ata2: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525180 irq 42 [ 1.318462] ata3: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525200 irq 42 [ 1.318464] ata4: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525280 irq 42 [ 1.318467] ata5: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525300 irq 42 [ 1.318469] ata6: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525380 irq 42 [ 1.318532] Fixed MDIO Bus: probed [ 1.318535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.318547] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.318557] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.318560] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.318578] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.322683] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.326566] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.326576] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe527000 [ 1.335618] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.335651] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.335654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.335656] usb usb1: Product: EHCI Host Controller [ 1.335658] usb usb1: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd [ 1.335660] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.335754] hub 1-0:1.0: USB hub found [ 1.335757] hub 1-0:1.0: 2 ports detected [ 1.335805] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.335814] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.335816] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.335821] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.340630] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.344490] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.344500] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe526000 [ 1.353566] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.353592] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.353594] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.353597] usb usb2: Product: EHCI Host Controller [ 1.353599] usb usb2: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd [ 1.353601] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.353690] hub 2-0:1.0: USB hub found [ 1.353692] hub 2-0:1.0: 2 ports detected [ 1.353731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.353737] uhci_hcd: USB Universal Host Controller Interface driver [ 1.353761] Initializing USB Mass Storage driver... [ 1.353771] usbcore: registered new interface driver usb-storage [ 1.353772] USB Mass Storage support registered. [ 1.353777] usbcore: registered new interface driver ums-alauda [ 1.353781] usbcore: registered new interface driver ums-cypress [ 1.353786] usbcore: registered new interface driver ums-datafab [ 1.353791] usbcore: registered new interface driver ums-freecom [ 1.353798] usbcore: registered new interface driver ums-isd200 [ 1.353803] usbcore: registered new interface driver ums-jumpshot [ 1.353808] usbcore: registered new interface driver ums-karma [ 1.353812] usbcore: registered new interface driver ums-onetouch [ 1.353817] usbcore: registered new interface driver ums-sddr09 [ 1.353821] usbcore: registered new interface driver ums-sddr55 [ 1.353826] usbcore: registered new interface driver ums-usbat [ 1.353854] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.356929] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.356946] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.356999] mousedev: PS/2 mouse device common for all mice [ 1.357068] rtc_cmos 00:04: RTC can wake from S4 [ 1.362590] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.362621] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.362749] cpuidle: using governor ladder [ 1.362919] cpuidle: using governor menu [ 1.363033] usbcore: registered new interface driver usbhid [ 1.363034] usbhid: USB HID core driver [ 1.363145] TCP cubic registered [ 1.363344] NET: Registered protocol family 10 [ 1.363748] lib80211: common routines for IEEE802.11 drivers [ 1.363749] lib80211_crypt: registered algorithm 'NULL' [ 1.363750] Registering the dns_resolver key type [ 1.363759] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 1.363816] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 [ 1.621858] ata4: SATA link down (SStatus 0 SControl 300) [ 1.621891] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.621916] ata6: SATA link down (SStatus 0 SControl 300) [ 1.621931] ata3: SATA link down (SStatus 0 SControl 300) [ 1.621948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.623999] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 1.624004] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.626769] ata1.00: configured for UDMA/133 [ 1.626893] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 1.627011] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.627058] sd 0:0:0:0: [sda] Write Protect is off [ 1.627061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.627080] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.636811] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.668413] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 1.668417] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.726472] ata2.00: configured for UDMA/133 [ 1.726604] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 1.726711] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.726741] sd 1:0:0:0: [sdb] Write Protect is off [ 1.726742] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.726752] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.741547] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > [ 1.741949] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.750819] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.750823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.751097] hub 1-1:1.0: USB hub found [ 1.751168] hub 1-1:1.0: 6 ports detected [ 1.774392] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.853141] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.863392] ata5.00: ATAPI: PLEXTOR DVDR PX-760A, 1.04, max UDMA/66 [ 1.865056] ata5.00: configured for UDMA/66 [ 1.870324] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > [ 1.870654] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.967205] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.967210] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.967476] hub 2-1:1.0: USB hub found [ 1.967548] hub 2-1:1.0: 8 ports detected [ 2.041746] usb 1-1.1: new full speed USB device using ehci_hcd and address 3 [ 2.155297] Refined TSC clocksource calibration: 3392.293 MHz. [ 2.155302] Switching to clocksource tsc [ 2.239270] usb 1-1.1: New USB device found, idVendor=0408, idProduct=3001 [ 2.239274] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.239277] usb 1-1.1: Product: Optical Touch Screen [ 2.239279] usb 1-1.1: Manufacturer: QUANTA [ 2.272322] hub 1-1:1.0: unable to enumerate USB device on port 5 [ 2.344876] usb 1-1.6: new low speed USB device using ehci_hcd and address 5 [ 2.436749] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c043 [ 2.436754] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.436756] usb 1-1.6: Product: USB-PS/2 Optical Mouse [ 2.436758] usb 1-1.6: Manufacturer: Logitech [ 2.440620] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input0 [ 2.440672] generic-usb 0003:046D:C043.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0 [ 2.617093] usb 1-1.5: new low speed USB device using ehci_hcd and address 6 [ 2.707873] usb 1-1.5: New USB device found, idVendor=046a, idProduct=0023 [ 2.707877] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.716752] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1 [ 2.716799] cherry 0003:046A:0023.0003: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.5/input0 [ 2.721523] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2 [ 2.721566] cherry 0003:046A:0023.0004: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.5/input1 [ 2.912339] scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-760A 1.04 PQ: 0 ANSI: 5 [ 2.912475] PM: Hibernation image not present or could not be loaded. [ 2.912486] registered taskstats version 1 [ 2.912905] Magic number: 3:988:450 [ 2.913002] rtc_cmos 00:04: setting system clock to 2011-03-04 22:24:40 UTC (1299277480) [ 2.914100] Freeing unused kernel memory: 1028k freed [ 2.914180] Write protecting the kernel read-only data: 10240k [ 2.915805] Freeing unused kernel memory: 844k freed [ 2.916485] Freeing unused kernel memory: 304k freed [ 2.937659] ACPI: acpi_idle yielding to intel_idle [ 2.955754] Btrfs loaded [ 2.957426] uvesafb: failed to execute /sbin/v86d [ 2.957471] uvesafb: make sure that the v86d helper is installed and executable [ 2.957520] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 2.957564] uvesafb: vbe_init() failed with -22 [ 2.957609] uvesafb: probe of uvesafb.0 failed with error -22 [ 2.960740] udev[118]: starting version 166 [ 2.970143] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 2.984901] ACPI: Power Button [PWRB] [ 2.984960] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.984990] ACPI: Power Button [PWRF] [ 2.988785] [drm] Initialized drm 1.1.0 20060810 [ 2.998816] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.998819] i915 0000:00:02.0: setting latency timer to 64 [ 3.043485] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 3.043486] [drm] MTRR allocation failed. Graphics performance may suffer. [ 3.043542] i915 GPIOB: SDA stuck high! [ 3.046763] i915 GPIOA: SDA stuck low! [ 3.046836] i915 GPIOC: SDA stuck high! [ 3.050753] i915 GPIOD: SDA stuck low! [ 3.050826] i915 GPIOE: SDA stuck high! [ 3.050908] i915 GPIOF: SDA stuck high! [ 3.050949] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdabda018 [ 3.050960] [drm:intel_opregion_setup], Public ACPI methods supported [ 3.050961] [drm:intel_opregion_setup], SWSCI supported [ 3.050962] [drm:intel_opregion_setup], ASLE supported [ 3.050976] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 3.050979] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.050979] [drm] Driver supports precise vblank timestamp query. [ 3.050981] [drm:intel_detect_pch], Found CougarPoint PCH [ 3.074057] [drm:init_status_page], render ring hws offset: 0x00000000 [ 3.074308] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000 [ 3.074426] [drm:init_status_page], blt ring hws offset: 0x00042000 [ 3.074540] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-D d [ 3.074542] [drm:parse_general_definitions], crt_ddc_bus_pin: 5 [ 3.074544] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 3.074546] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 3.074552] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 3.074560] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 3.074567] [drm:intel_modeset_init], 2 display pipes available. [ 3.074599] [drm:intel_crt_init], pch crt adpa set to 0xf40018 [ 3.074643] i915 GPIOE: SDA stuck high! [ 3.126489] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 3.126501] i915 GPIOE: bus seems to be busy [ 3.130474] [drm:intel_sdvo_read_byte], i2c transfer returned -12 [ 3.130476] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 3.130552] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 3.131065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.131067] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.131578] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.131579] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.131641] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 3.132153] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.132155] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.132669] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.132671] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 3.132688] [drm:intel_panel_get_backlight], get backlight PWM = 0 [ 3.132695] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.134512] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 3.134516] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 3.160606] [drm:intel_update_watermarks], plane B (pipe 1) clock: 0 [ 3.160608] [drm:intel_update_fbc], [ 3.160993] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 3.160995] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 3.160996] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 3.160997] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1 [ 3.161416] [drm:intel_update_fbc], [ 3.161541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 3.161545] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40018 [ 3.171376] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 3.171382] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.171385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 3.171390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 3.223225] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 3.223237] i915 GPIOE: bus seems to be busy [ 3.227198] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 3.227200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] [ 3.227711] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.227713] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.227714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected [ 3.227716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 3.279058] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 3.279091] i915 GPIOF: SDA stuck high! [ 3.279136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 3.279138] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] [ 3.279649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 3.279651] [drm:ironlake_dp_detect], DPCD: 0000 [ 3.279652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected [ 3.279654] No connectors reported connected with modes [ 3.279655] [drm:drm_setup_crtcs], [ 3.279656] [drm:drm_enable_connectors], connector 5 enabled? no [ 3.279657] [drm:drm_enable_connectors], connector 8 enabled? no [ 3.279658] [drm:drm_enable_connectors], connector 10 enabled? no [ 3.279659] [drm:drm_enable_connectors], connector 14 enabled? no [ 3.279660] [drm:drm_enable_connectors], connector 16 enabled? no [ 3.279662] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 3.279664] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.282483] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, bo ffff88020bc0c400 [ 3.282908] [drm:drm_crtc_helper_set_config], [ 3.282909] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 3.282914] [drm:drm_crtc_helper_set_config], [ 3.282914] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 3.284122] Console: switching to colour frame buffer device 128x48 [ 3.285323] fb0: inteldrmfb frame buffer device [ 3.285324] drm: registered panic notifier [ 3.285332] No ACPI video bus found [ 3.285411] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.340355] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 4.340358] PM: Marking nosave pages: 0000000020000000 - 0000000020200000 [ 4.340364] PM: Marking nosave pages: 0000000040000000 - 0000000040200000 [ 4.340370] PM: Marking nosave pages: 00000000da858000 - 00000000dabc9000 [ 4.340380] PM: Marking nosave pages: 00000000dabca000 - 00000000dae8a000 [ 4.340388] PM: Marking nosave pages: 00000000db000000 - 0000000100000000 [ 4.340788] PM: Basic memory bitmaps created [ 4.362396] PM: Basic memory bitmaps freed [ 4.467516] PM: Starting manual resume from disk [ 4.467518] PM: Hibernation image partition 8:18 present [ 4.467519] PM: Looking for hibernation image. [ 4.467664] PM: Image not found (code -22) [ 4.467666] PM: Hibernation image not present or could not be loaded. [ 4.476411] device fsid 43c66fc60f997c-f4936d0fb26e8893 devid 1 transid 575831 /dev/sda5 [ 9.519163] udev[382]: starting version 166 [ 10.041837] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 10.041854] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 10.041857] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 10.041864] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 10.048863] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfe400000 [ 10.048921] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 10.048923] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 10.048926] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 10.048928] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 10.048930] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 10.048933] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 10.048935] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X [ 10.048937] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X [ 10.052173] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values [ 10.052180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 10.052182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.052184] usb usb3: Product: xHCI Host Controller [ 10.052186] usb usb3: Manufacturer: Linux 2.6.38-rc6-17-desktop xhci_hcd [ 10.052187] usb usb3: SerialNumber: 0000:03:00.0 [ 10.052263] xHCI xhci_add_endpoint called for root hub [ 10.052265] xHCI xhci_check_bandwidth called for root hub [ 10.052292] hub 3-0:1.0: USB hub found [ 10.052295] hub 3-0:1.0: 4 ports detected [ 10.052925] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.054482] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.147000] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 10.147001] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 10.147021] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.147027] e1000e 0000:00:19.0: setting latency timer to 64 [ 10.147108] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X [ 10.395434] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) e0:69:95:01:f2:02 [ 10.395436] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 10.395468] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 10.398541] eth0 renamed to eth2 by udevd [385] [ 10.409858] udev[385]: renamed network interface eth0 to eth2 [ 10.484037] iTCO_vendor_support: vendor-support=0 [ 10.485121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 10.485186] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 10.485245] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.606830] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.606852] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 10.606871] scsi 4:0:0:0: Attached scsi generic sg2 type 5 [ 10.645771] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.791034] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.791076] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 10.791096] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.887063] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 10.887067] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.887206] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 11.231047] IR NEC protocol handler initialized [ 11.250709] ALSA patch_realtek.c:1530: SKU: Nid=0x1d sku_cfg=0x4006f601 [ 11.250712] ALSA patch_realtek.c:1532: SKU: port_connectivity=0x1 [ 11.250713] ALSA patch_realtek.c:1533: SKU: enable_pcbeep=0x0 [ 11.250714] ALSA patch_realtek.c:1534: SKU: check_sum=0x00000006 [ 11.250715] ALSA patch_realtek.c:1535: SKU: customization=0x000000f6 [ 11.250717] ALSA patch_realtek.c:1536: SKU: external_amp=0x0 [ 11.250718] ALSA patch_realtek.c:1537: SKU: platform_type=0x0 [ 11.250719] ALSA patch_realtek.c:1538: SKU: swap=0x0 [ 11.250720] ALSA patch_realtek.c:1539: SKU: override=0x1 [ 11.250879] hda_codec: ALC892: BIOS auto-probing. [ 11.250882] ALSA hda_codec.c:4633: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) [ 11.250883] ALSA hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.250885] ALSA hda_codec.c:4641: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.250886] ALSA hda_codec.c:4642: mono: mono_out=0x0 [ 11.250888] ALSA hda_codec.c:4645: dig-out=0x11/0x1e [ 11.250889] ALSA hda_codec.c:4646: inputs: [ 11.250890] ALSA hda_codec.c:4652: [ 11.252924] ALSA patch_realtek.c:1587: realtek: No valid SSID, checking pincfg 0x4006f601 for NID 0x1d [ 11.252926] ALSA patch_realtek.c:1603: realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892 [ 11.255874] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 11.255989] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.266364] input: QUANTA Optical Touch Screen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7 [ 11.266449] quanta-touch 0003:0408:3001.0001: input,hidraw3: USB HID v1.10 Device [QUANTA Optical Touch Screen] on usb-0000:00:1a.0-1.1/input0 [ 11.410405] IR RC5(x) protocol handler initialized [ 11.427277] Linux video capture interface: v2.00 [ 11.437629] IR RC6 protocol handler initialized [ 11.441471] bttv: driver version 0.9.18 loaded [ 11.441473] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 11.441490] bttv: Bt8xx card found (0). [ 11.441504] bttv 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.441520] bttv0: Bt878 (rev 17) at 0000:02:02.0, irq: 18, latency: 32, mmio: 0xf0001000 [ 11.441538] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 11.441539] bttv0: using: Hauppauge (bt878) [card=10,insmod option] [ 11.441587] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 11.444091] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 11.444170] bt878 #0 [sw]: Test OK [ 11.471856] IR JVC protocol handler initialized [ 11.500456] tveeprom 11-0050: Hauppauge model 44354, rev C142, serial# 2294605 [ 11.500458] tveeprom 11-0050: tuner model is Temic 4009FR5 (idx 42, type 20) [ 11.500459] tveeprom 11-0050: TV standards PAL(B/G) (eeprom 0x04) [ 11.500460] tveeprom 11-0050: audio processor is MSP3415 (idx 6) [ 11.500461] tveeprom 11-0050: has radio [ 11.500462] bttv0: Hauppauge eeprom indicates model#44354 [ 11.500463] bttv0: tuner type=20 [ 12.319978] IR Sony protocol handler initialized [ 12.349396] i2c-core: driver [msp3400] using legacy suspend method [ 12.349398] i2c-core: driver [msp3400] using legacy resume method [ 12.364850] msp3400 11-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) [ 12.364852] msp3400 11-0040: msp3400 supports nicam, mode is autodetect [ 12.483359] lirc_dev: IR Remote Control driver registered, major 251 [ 12.486052] IR LIRC bridge handler initialized [ 12.496004] i2c-core: driver [tuner] using legacy suspend method [ 12.496006] i2c-core: driver [tuner] using legacy resume method [ 12.502689] tuner 11-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 12.586081] tuner-simple 11-0061: creating new instance [ 12.586083] tuner-simple 11-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) [ 12.587296] bttv0: registered device video0 [ 12.587314] bttv0: registered device vbi0 [ 12.587331] bttv0: registered device radio0 [ 12.590163] bttv0: PLL: 28636363 => 35468950 .. ok [ 13.260515] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 13.260520] [drm:intel_crt_detect], CRT not detected via hotplug [ 13.260523] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2 [ 13.311374] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 13.311386] i915 GPIOE: bus seems to be busy [ 13.315355] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2 [ 13.315868] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.315871] [drm:ironlake_dp_detect], DPCD: 0000 [ 13.315874] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2 [ 13.368202] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 13.368249] i915 GPIOF: SDA stuck high! [ 13.368295] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2 [ 13.368811] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.368813] [drm:ironlake_dp_detect], DPCD: 0000 [ 13.368814] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2 [ 14.729804] Adding 2104508k swap on /dev/sdb2. Priority:-1 extents:1 across:2104508k [ 14.738642] Adding 4193276k swap on /dev/sda2. Priority:-2 extents:1 across:4193276k [ 16.086343] device-mapper: uevent: version 1.0.3 [ 16.086391] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 37.042034] kjournald starting. Commit interval 15 seconds [ 37.042204] EXT3-fs (sda1): using internal journal [ 37.042209] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 37.083154] kjournald starting. Commit interval 15 seconds [ 37.083418] EXT3-fs (sdb5): using internal journal [ 37.083423] EXT3-fs (sdb5): mounted filesystem with ordered data mode [ 37.208050] REISERFS (device sdb3): found reiserfs format "3.6" with standard journal [ 37.208061] REISERFS (device sdb3): using ordered data mode [ 37.208063] reiserfs: using flush barriers [ 37.211595] REISERFS (device sdb3): journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.211786] REISERFS (device sdb3): checking transaction log (sdb3) [ 37.274126] REISERFS (device sdb3): Using r5 hash to sort names [ 37.319291] REISERFS (device sdb6): found reiserfs format "3.6" with standard journal [ 37.319303] REISERFS (device sdb6): using ordered data mode [ 37.319305] reiserfs: using flush barriers [ 37.326900] REISERFS (device sdb6): journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.327087] REISERFS (device sdb6): checking transaction log (sdb6) [ 37.357452] REISERFS (device sdb6): Using r5 hash to sort names [ 37.385105] REISERFS (device sdb7): found reiserfs format "3.6" with standard journal [ 37.385118] REISERFS (device sdb7): using ordered data mode [ 37.385120] reiserfs: using flush barriers [ 37.392941] REISERFS (device sdb7): journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.393126] REISERFS (device sdb7): checking transaction log (sdb7) [ 37.431470] REISERFS (device sdb7): Using r5 hash to sort names [ 37.465066] REISERFS (device sdb8): found reiserfs format "3.6" with standard journal [ 37.465079] REISERFS (device sdb8): using ordered data mode [ 37.465081] reiserfs: using flush barriers [ 37.472773] REISERFS (device sdb8): journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.472959] REISERFS (device sdb8): checking transaction log (sdb8) [ 37.515064] REISERFS (device sdb8): Using r5 hash to sort names [ 37.555890] REISERFS (device sdb10): found reiserfs format "3.6" with standard journal [ 37.555904] REISERFS (device sdb10): using ordered data mode [ 37.555906] reiserfs: using flush barriers [ 37.561605] REISERFS (device sdb10): journal params: device sdb10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.561785] REISERFS (device sdb10): checking transaction log (sdb10) [ 37.592438] REISERFS (device sdb10): Using r5 hash to sort names [ 37.624445] REISERFS (device sdb11): found reiserfs format "3.6" with standard journal [ 37.624459] REISERFS (device sdb11): using ordered data mode [ 37.624461] reiserfs: using flush barriers [ 37.632136] REISERFS (device sdb11): journal params: device sdb11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 37.632324] REISERFS (device sdb11): checking transaction log (sdb11) [ 37.681576] REISERFS (device sdb11): Using r5 hash to sort names [ 37.727014] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 37.754347] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 37.794474] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 37.801918] device fsid 4747820d8139ac1c-e87e5507e36ff49c devid 1 transid 55812 /dev/sda9 [ 38.460985] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 38.518935] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 38.536554] kjournald starting. Commit interval 15 seconds [ 38.536735] EXT3-fs (sda12): using internal journal [ 38.536741] EXT3-fs (sda12): mounted filesystem with ordered data mode [ 41.122103] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 41.154456] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.579995] coretemp coretemp.0: TjMax is 98 C. [ 41.580031] coretemp coretemp.1: TjMax is 98 C. [ 41.580057] coretemp coretemp.2: TjMax is 98 C. [ 41.580104] coretemp coretemp.3: TjMax is 98 C. [ 46.737348] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 50.644743] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X [ 50.695561] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X [ 50.695979] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 52.300858] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 52.300861] e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO [ 52.301258] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 53.259486] NET: Registered protocol family 17 [ 60.392149] [drm:i915_driver_open], [ 60.392171] [drm:drm_crtc_helper_set_config], [ 60.392172] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 60.392177] [drm:drm_crtc_helper_set_config], [ 60.392178] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 60.392201] [drm:i915_driver_open], [ 60.392367] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 60.392369] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 60.392395] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 60.392397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 60.392401] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 60.392402] [drm:intel_crt_detect], CRT not detected via hotplug [ 60.392405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 60.392407] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 60.392408] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 60.392411] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 60.392412] [drm:intel_crt_detect], CRT not detected via hotplug [ 60.392413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 60.392436] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 60.392438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 60.442607] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 60.442620] i915 GPIOE: bus seems to be busy [ 60.446579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 60.446583] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 60.446584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 60.498461] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 60.498470] i915 GPIOE: bus seems to be busy [ 60.502417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 60.502463] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 60.502465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] [ 60.502975] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.502977] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.502978] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected [ 60.502980] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 60.502981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] [ 60.503491] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.503492] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.503493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected [ 60.503510] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 60.503511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 60.555271] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 60.555301] i915 GPIOF: SDA stuck high! [ 60.555342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 60.555346] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 60.555347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 60.607130] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 60.607159] i915 GPIOF: SDA stuck high! [ 60.607200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 60.607238] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 60.607240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] [ 60.607752] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.607753] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.607754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected [ 60.607756] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 60.607757] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] [ 60.608269] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.608270] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.608271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected [ 60.608302] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 60.608304] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 60.608307] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 60.608309] [drm:intel_crt_detect], CRT not detected via hotplug [ 60.608310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 60.608312] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 60.608313] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 60.608315] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 60.608316] [drm:intel_crt_detect], CRT not detected via hotplug [ 60.608317] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 60.608335] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 60.608337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 60.659991] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 60.660003] i915 GPIOE: bus seems to be busy [ 60.663953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 60.663957] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 60.663959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 60.715827] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 60.715839] i915 GPIOE: bus seems to be busy [ 60.719795] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected [ 60.719828] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 60.719830] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] [ 60.720341] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.720342] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.720344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected [ 60.720345] [drm:drm_mode_getconnector], [CONNECTOR:10:?] [ 60.720347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] [ 60.720858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.720859] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.720860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected [ 60.720876] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 60.720877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 60.772667] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 60.772698] i915 GPIOF: SDA stuck high! [ 60.772741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 60.772744] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 60.772746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] [ 60.824530] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 60.824562] i915 GPIOF: SDA stuck high! [ 60.824604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected [ 60.824633] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 60.824635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] [ 60.825146] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.825147] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.825149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected [ 60.825151] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 60.825152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] [ 60.825663] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 60.825664] [drm:ironlake_dp_detect], DPCD: 0000 [ 60.825665] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected [ 60.956482] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 60.956486] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 62.416949] eth2: no IPv6 routers present [ 70.376860] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0 [ 70.376866] [drm:intel_crt_detect], CRT not detected via hotplug [ 70.376869] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2 [ 70.428713] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb] [ 70.428725] i915 GPIOE: bus seems to be busy [ 70.432684] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2 [ 70.433197] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 70.433199] [drm:ironlake_dp_detect], DPCD: 0000 [ 70.433200] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2 [ 70.484564] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd] [ 70.484595] i915 GPIOF: SDA stuck high! [ 70.484637] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2 [ 70.485150] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 70.485151] [drm:ironlake_dp_detect], DPCD: 0000 [ 70.485152] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2 --------------030007070101040708050702 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx --------------030007070101040708050702--