[Intel-wired-lan] [next PATCH S15 09/15] i40e: remove FD atr control from debugfs

[Catherine Sullivan <catherine.sullivan@intel.com>]

From: Shannon Nelson <shannon.nelson@intel.com>

Since the flow-director-atr priv flag was added to our ethtool interface,
we don't need the on/off control in debugfs.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Change-ID: Ib3b599916434ab30ccd40074e71d7a81609b5bb5
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index e19d479..2f0e2f5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -953,24 +953,6 @@ static void i40e_dbg_dump_veb_all(struct i40e_pf *pf)
 	}
 }
 
-/**
- * i40e_dbg_cmd_fd_ctrl - Enable/disable FD sideband/ATR
- * @pf: the PF that would be altered
- * @flag: flag that needs enabling or disabling
- * @enable: Enable/disable FD SD/ATR
- **/
-static void i40e_dbg_cmd_fd_ctrl(struct i40e_pf *pf, u64 flag, bool enable)
-{
-	if (enable) {
-		pf->flags |= flag;
-	} else {
-		pf->flags &= ~flag;
-		pf->auto_disable_flags |= flag;
-	}
-	dev_info(&pf->pdev->dev, "requesting a PF reset\n");
-	i40e_do_reset_safe(pf, BIT(__I40E_PF_RESET_REQUESTED));
-}
-
 #define I40E_MAX_DEBUG_OUT_BUFFER (4096*4)
 /**
  * i40e_dbg_command_write - write into command datum
@@ -1759,10 +1741,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		raw_packet = NULL;
 		kfree(asc_packet);
 		asc_packet = NULL;
-	} else if (strncmp(cmd_buf, "fd-atr off", 10) == 0) {
-		i40e_dbg_cmd_fd_ctrl(pf, I40E_FLAG_FD_ATR_ENABLED, false);
-	} else if (strncmp(cmd_buf, "fd-atr on", 9) == 0) {
-		i40e_dbg_cmd_fd_ctrl(pf, I40E_FLAG_FD_ATR_ENABLED, true);
 	} else if (strncmp(cmd_buf, "fd current cnt", 14) == 0) {
 		dev_info(&pf->pdev->dev, "FD current total filter count for this interface: %d\n",
 			 i40e_get_current_fd_count(pf));
@@ -1989,8 +1967,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		dev_info(&pf->pdev->dev, "  send indirect aq_cmd <flags> <opcode> <datalen> <retval> <cookie_h> <cookie_l> <param0> <param1> <param2> <param3> <buffer_len>\n");
 		dev_info(&pf->pdev->dev, "  add fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
 		dev_info(&pf->pdev->dev, "  rem fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
-		dev_info(&pf->pdev->dev, "  fd-atr off\n");
-		dev_info(&pf->pdev->dev, "  fd-atr on\n");
 		dev_info(&pf->pdev->dev, "  fd current cnt");
 		dev_info(&pf->pdev->dev, "  lldp start\n");
 		dev_info(&pf->pdev->dev, "  lldp stop\n");
-- 
1.9.3