[Intel-wired-lan] [PATCH net v1 0/3] ice: Fixes for double vlan promiscuous mode

[Grzegorz Siwik <grzegorz.siwik@intel.com>]

This series fixes known issues related to double vlan promiscuous mode.
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware.
Ignore ERR_ALREADY_EXISTS error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Avoid enabling or disabling vlan 0 when trying to set promiscuous
vlan mode if double vlan mode is enabled. This fix is needed
because the driver tries to add the vlan 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled.

Grzegorz Siwik (3):
  ice: Fix double VLAN error when entering promisc mode
  ice: Ignore ERR_ALREADY_EXISTS when setting promisc mode
  ice: Fix clearing of promisc mode with bridge over bond

 drivers/net/ethernet/intel/ice/ice_lib.c    |  8 +++++++-
 drivers/net/ethernet/intel/ice/ice_main.c   | 13 ++++++++++++-
 drivers/net/ethernet/intel/ice/ice_switch.c |  9 ++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

-- 
1.8.3.1

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan