From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nguyen, Anthony L Date: Mon, 14 Jun 2021 21:22:55 +0000 Subject: [Intel-wired-lan] [PATCH v1 1/1] e1000e: Add space to the debug print In-Reply-To: <20210614072452.480186-1-sasha.neftin@intel.com> References: <20210614072452.480186-1-sasha.neftin@intel.com> Message-ID: <17f7910ef523253e4e42dbdc81e0e80cb14c5e1d.camel@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: On Mon, 2021-06-14 at 10:24 +0300, Sasha Neftin wrote: > Complete to commit 3cf31b1a9eff ("e1000e: bump up timeout to > wait when ME un-configures ULP mode") > Minor fixes to allow debug prints more readable. > > Fixes: 3cf31b1a9eff ("e1000e: bump up timeout to > wait when ME un-configures ULP mode") The Fixes should all be on one line. Fixes tag: Fixes: 3cf31b1a9eff ("e1000e: bump up timeout to Has these problem(s): - Subject has leading but no trailing parentheses - Subject has leading but no trailing quotes > Signed-off-by: Sasha Neftin > --- > drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c > b/drivers/net/ethernet/intel/e1000e/ich8lan.c > index 5b008c88beb7..a3cf0af7aedd 100644 > --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c > +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c > @@ -1271,9 +1271,9 @@ static s32 e1000_disable_ulp_lpt_lp(struct > e1000_hw *hw, bool force) > usleep_range(10000, 11000); > } > if (firmware_bug) > - e_warn("ULP_CONFIG_DONE took %dmsec. This is a > firmware bug\n", i * 10); > + e_warn("ULP_CONFIG_DONE took %d msec. This is > a firmware bug\n", i * 10); > else > - e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", > i * 10); > + e_dbg("ULP_CONFIG_DONE cleared after %d > msec\n", i * 10); nit: Since there will be a new version, can you put the 'i * 10's on a new line? WARNING: line length of 81 exceeds 80 columns WARNING: line length of 98 exceeds 80 columns > > if (force) { > mac_reg = er32(H2ME);