From: "jeffrey.tseng (曾弘)" <jeffrey.tseng@gigabyte.com>
To: Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Bjorn Helgaas <helgaas@kernel.org>
Cc: "gary.liu (劉家良)" <gary.liu@gigabyte.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"intel-wired-lan@lists.osuosl.org"
<intel-wired-lan@lists.osuosl.org>,
"arthur.chen (陳善康)" <arthur.chen@gigabyte.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"tony.ku (谷瑞麟)" <tony.ku@gigabyte.com>
Subject: Re: [Intel-wired-lan] [Bug 216599] New: i210 doesn't work and triggers netdev watchdog (Linux 5.10)
Date: Tue, 18 Oct 2022 09:05:51 +0000 [thread overview]
Message-ID: <1b2a728d4c8e4f289277caa669be06dc@gigabyte.com> (raw)
In-Reply-To: 20221017170820.GA3712555@bhelgaas
[-- Attachment #1.1.1: Type: text/plain, Size: 7121 bytes --]
Hi Jesse and Tony
I also download the driver which is provide from Intel.
https://www.intel.com/content/www/us/en/download/14098/intel-network-adapter-driver-for-82575-6-82580-i350-and-i210-211-based-gigabit-network-connections-for-linux.html
From the README , I find out this one.
[cid:image003.png@01D8E314.009ED550]
I also modified source code of igb_main.c and make sure it is MSI interrupt because of above description.
[cid:image004.png@01D8E314.009ED550]
It can’t work well.
Jeffrey
Best Regards,
Jeffrey Tseng 曾弘
技嘉科技 GIGABYTE
新北市新店區北新路三段213號11樓
電話: 02-89787668 ext. 556
Mobile : 0952432332
line : 0952432332
E-mail: jeffrey.tseng@gigabyte.com<mailto:jeffrey.tseng@gigabyte.com>
From: jeffrey.tseng (曾弘)
Sent: Tuesday, October 18, 2022 3:01 PM
To: 'Bjorn Helgaas' <helgaas@kernel.org>; Jesse Brandeburg <jesse.brandeburg@intel.com>; Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: netdev@vger.kernel.org; linux-pci@vger.kernel.org; intel-wired-lan@lists.osuosl.org; linux-kernel@vger.kernel.org; gary.liu (劉家良) <gary.liu@gigabyte.com>; arthur.chen (陳善康) <arthur.chen@gigabyte.com>; tony.ku (谷瑞麟) <tony.ku@gigabyte.com>
Subject: RE: [Bug 216599] New: i210 doesn't work and triggers netdev watchdog (Linux 5.10)
Hi Bjorn , Jesse and Tony
I already updated my status on Bugzilla and the issue is still there.(P1)
https://bugzilla.kernel.org/show_bug.cgi?id=216599
Platform : imx8mm
Linux version : 5.10
My kernel log :
[ 2.764994] pci 0000:01:00.0: BAR 0: assigned [mem 0x18100000-0x1817ffff]
[ 2.771801] pci 0000:01:00.0: BAR 3: assigned [mem 0x18180000-0x18183fff]
[ 2.778620] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
The log of kernel issue.
BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M]
BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K]
ROM: 0x40200000 (disabled) [size=1M]
I try to modify the PCIE driver of kernel to Expansion ROM but it seem to show not thing and work not well. (P2)
Dear Jesse and Anthony
Is this a igb driver issue or i210 defective ? If it already fixed, you can give me a suggestion to download the fixed version check it out.
Please kindly give me a hand.
Jeffrey
P1 :
[cid:image001.png@01D8E312.CD8A0280]
P2:
[cid:image002.png@01D8E312.CD8A0280]
Best Regards,
Jeffrey Tseng 曾弘
技嘉科技 GIGABYTE
新北市新店區北新路三段213號11樓
電話: 02-89787668 ext. 556
Mobile : 0952432332
line : 0952432332
E-mail: jeffrey.tseng@gigabyte.com<mailto:jeffrey.tseng@gigabyte.com>
-----Original Message-----
From: Bjorn Helgaas <helgaas@kernel.org<mailto:helgaas@kernel.org>>
Sent: Tuesday, October 18, 2022 1:08 AM
To: Jesse Brandeburg <jesse.brandeburg@intel.com<mailto:jesse.brandeburg@intel.com>>; Tony Nguyen <anthony.l.nguyen@intel.com<mailto:anthony.l.nguyen@intel.com>>
Cc: jeffrey.tseng (曾弘) <jeffrey.tseng@gigabyte.com<mailto:jeffrey.tseng@gigabyte.com>>; netdev@vger.kernel.org<mailto:netdev@vger.kernel.org>; linux-pci@vger.kernel.org<mailto:linux-pci@vger.kernel.org>; intel-wired-lan@lists.osuosl.org<mailto:intel-wired-lan@lists.osuosl.org>; linux-kernel@vger.kernel.org<mailto:linux-kernel@vger.kernel.org>
Subject: Re: [Bug 216599] New: i210 doesn't work and triggers netdev watchdog (Linux 5.10)
Caution: This is an external email and has a suspicious subject or content. Please take care when clicking link or opening attachments. When in doubt, contact your MIS Department.
On Mon, Oct 17, 2022 at 11:09:20AM +0000, bugzilla-daemon@kernel.org<mailto:bugzilla-daemon@kernel.org> wrote:
> https://urldefense.com/v3/__https://bugzilla.kernel.org/show_bug.cgi?i<https://urldefense.com/v3/__https:/bugzilla.kernel.org/show_bug.cgi?i>
> d=216599__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2
> VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM6vnLuWnY$
>
> Bug ID: 216599
> Summary: i210 doesn't work and triggers netdev watchdog (Linux
> 5.10)
> Created attachment 303021
> -->
> https://urldefense.com/v3/__https://bugzilla.kernel.org/attachment.cgi<https://urldefense.com/v3/__https:/bugzilla.kernel.org/attachment.cgi>
> ?id=303021&action=edit__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU
> 2nPJVoN03EYlj2VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM6e138Wjg$
> This is the complete dmesg log and "sudo lspci -vv" output.
>
> Here is my question.
> My platform : imx8mm
> Ethernet Control : Intel I210
> Linux version 5.10.72-lts-5.10.y+g22ec7e8cbace (oe-user@oe-host)
> (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2. UTC
> 2011
>
> I follow this
> https://urldefense.com/v3/__https://git.kernel.org/linus/500b55b05d0a_<https://urldefense.com/v3/__https:/git.kernel.org/linus/500b55b05d0a_>
> _;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2VYD6tGeXT
> lmGOoLhpX-vPc9_1P3_LsEz9r7zM65IqfTIk$
> to add the patch in my platform.
>
> The issue and problem is still there. Anyone can give me a hand ?
Note this is an old v5.10 kernel on ARM64. No indication of whether the problem occurs on a recent kernel.
We had an earlier issue with i210 when the disabled ROM BAR overlapped BAR 3 [1] and the watchdog triggered:
BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M]
BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K]
ROM: 0x40200000 (disabled) [size=1M]
...
NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
igb 0002:01:00.0 enP2p1s0: Reset adapter
But this case looks different because there is no ROM BAR at all.
From the dmesg attached at [2]:
pci 0000:01:00.0: BAR 0: assigned [mem 0x18100000-0x1817ffff]
pci 0000:01:00.0: BAR 3: assigned [mem 0x18180000-0x18183fff]
pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
...
igb 0000:01:00.0: Detected Tx Unit Hang
NETDEV WATCHDOG: eth1 (igb): transmit queue 1 timed out
I'm assuming this is a driver issue, not a PCI core issue. But please ping me if you think otherwise.
Bjorn
[1] https://urldefense.com/v3/__https://git.kernel.org/linus/500b55b05d0a__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM65IqfTIk$<https://urldefense.com/v3/__https:/git.kernel.org/linus/500b55b05d0a__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM65IqfTIk$>
[2] https://urldefense.com/v3/__https://bugzilla.kernel.org/show_bug.cgi?id=216599__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM6vnLuWnY$<https://urldefense.com/v3/__https:/bugzilla.kernel.org/show_bug.cgi?id=216599__;!!DaQGe0nW977OPw!nRfCuRVCLM4YW4T8lrmKHPy7gHiU2nPJVoN03EYlj2VYD6tGeXTlmGOoLhpX-vPc9_1P3_LsEz9r7zM6vnLuWnY$>
[-- Attachment #1.1.2: Type: text/html, Size: 24053 bytes --]
[-- Attachment #1.2: image001.png --]
[-- Type: image/png, Size: 99488 bytes --]
[-- Attachment #1.3: image002.png --]
[-- Type: image/png, Size: 230333 bytes --]
[-- Attachment #1.4: image003.png --]
[-- Type: image/png, Size: 29534 bytes --]
[-- Attachment #1.5: image004.png --]
[-- Type: image/png, Size: 23466 bytes --]
[-- Attachment #2: kernel log and lspci info_MSI_interrupt.txt --]
[-- Type: text/plain, Size: 68688 bytes --]
U-Boot SPL 2021.04-lf_v2021.04+gffe994e9e6 (Apr 05 2011 - 23:00:00 +0000)
power_init_board in coming XXXXXXXXXXX PMIC branch 1003 OK Finish 1
power_bd71837_init
DDRINFO: start DRAM init
DDRINFO: DRAM rate 3000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
SEC0: RNG instantiated
Normal Boot
Trying to boot from MMC2
NOTICE: BL31: v2.4(release):lf-5.10.72-2.2.0-0-g5782363f9
NOTICE: BL31: Built : 12:17:17, Nov 18 2021
U-Boot 2021.04-lf_v2021.04+gffe994e9e6 (Apr 05 2011 - 23:00:00 +0000)
CPU: i.MX8MMQ rev1.0 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 45C
Reset cause: POR
Model: NXP i.MX8MM EVK board
DRAM: 4 GiB
wait_for_sr_state: Arbitration lost sr=16 cr=98 state=202
setup_typec: tcpc port2 init failed, err=-5
wait_for_sr_state: Arbitration lost sr=16 cr=98 state=202
setup_typec: tcpc port1 init failed, err=-5
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
[*]-Video Link 0adv7535_mipi2hdmi adv7535@3d: Can't find cec device id=0x3c
fail to probe panel device adv7535@3d
mxs_video lcdif@32e00000: failed to get any video link display timings
probe video device failed, ret -22
[0] lcdif@32e00000, video
[1] mipi_dsi@32e10000, video_bridge
[2] adv7535@3d, panel
adv7535_mipi2hdmi adv7535@3d: Can't find cec device id=0x3c
fail to probe panel device adv7535@3d
mxs_video lcdif@32e00000: failed to get any video link display timings
probe video device failed, ret -22
In: serial
Out: serial
Err: serial
SEC0: RNG instantiated
BuildInfo:
- ATF 5782363
switch to partitions #0, OK
mmc2(part 0) is current device
flash target is MMC:2
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - 1e:68:83:3a:77:29
eth0: ethernet@30be0000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
starting USB...
Bus usb@32e40000: wait_for_sr_state: Arbitration lost sr=36 cr=98 state=202
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=0
wait_for_sr_state: Arbitration lost sr=36 cr=98 state=202
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=0
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=1
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=2
i2c_init_transfer: give up i2c_regs=0x30a30000
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=0
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=1
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=2
i2c_init_transfer: give up i2c_regs=0x30a30000
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=0
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=1
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x50 retry=2
i2c_init_transfer: give up i2c_regs=0x30a30000
Port not available.
USB is stopped. Please issue 'usb start' first.
MMC: no card present
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
47018 bytes read in 2 ms (22.4 MiB/s)
MMC: no card present
Scanning disk mmc@30b50000.blk...
Disk mmc@30b50000.blk not ready
Scanning disk mmc@30b60000.blk...
Found 3 disks
No EFI system partition
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=0
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=1
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=2
i2c_init_transfer: give up i2c_regs=0x30a30000
adv7535_mipi2hdmi adv7535@3d: Can't find cec device id=0x3c
fail to probe panel device adv7535@3d
mxs_video lcdif@32e00000: failed to get any video link display timings
BootOrder not defined
EFI boot manager: Cannot load any image
Running BSP bootcmd ...
switch to partitions #0, OK
mmc2(part 0) is current device
Failed to load 'boot.scr'
30910976 bytes read in 94 ms (313.6 MiB/s)
Booting from mmc ...
47018 bytes read in 2 ms (22.4 MiB/s)
Moving Image from 0x40480000 to 0x40600000, end=42410000
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Using Device Tree in place at 0000000043000000, end 000000004300e7a9
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=0
wait_for_sr_state: Arbitration lost sr=36 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=1
wait_for_sr_state: Arbitration lost sr=16 cr=88 state=2020
i2c_init_transfer: failed for chip 0x3c retry=2
i2c_init_transfer: give up i2c_regs=0x30a30000
adv7535_mipi2hdmi adv7535@3d: Can't find cec device id=0x3c
fail to probe panel device adv7535@3d
mxs_video lcdif@32e00000: failed to get any video link display timings
probe video device failed, ret -22
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.72-lts-5.10.y+g22ec7e8cbace (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP PREEMPT Tue Apr 5 23:00:00 UTC 2011
[ 0.000000] Machine model: FSL i.MX8MM EVK board
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000098000000, size 640 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x13f7c9700-0x13f7cbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s56280 r8192 d29736 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk2p2 rootwait rw
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Memory: 3361728K/4194304K available (18496K kernel code, 1514K rwdata, 7052K rodata, 3008K init, 551K bss, 177216K reserved, 655360K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 128 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] random: get_random_bytes called from start_kernel+0x320/0x4e4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[ 0.000386] Console: colour dummy device 80x25
[ 0.000453] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
[ 0.000464] pid_max: default: 32768 minimum: 301
[ 0.000536] LSM: Security Framework initializing
[ 0.000597] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000614] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001832] rcu: Hierarchical SRCU implementation.
[ 0.002807] EFI services will not be available.
[ 0.002975] smp: Bringing up secondary CPUs ...
[ 0.003332] Detected VIPT I-cache on CPU1
[ 0.003357] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[ 0.003400] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.003812] Detected VIPT I-cache on CPU2
[ 0.003830] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[ 0.003856] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.004283] Detected VIPT I-cache on CPU3
[ 0.004300] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[ 0.004325] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.004384] smp: Brought up 1 node, 4 CPUs
[ 0.004396] SMP: Total of 4 processors activated.
[ 0.004405] CPU features: detected: 32-bit EL0 Support
[ 0.004411] CPU features: detected: CRC32 instructions
[ 0.004418] CPU features: detected: 32-bit EL1 Support
[ 0.013174] CPU: All CPU(s) started at EL2
[ 0.013197] alternatives: patching kernel code
[ 0.015046] devtmpfs: initialized
[ 0.021103] KASLR disabled due to lack of seed
[ 0.021251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.021265] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.036954] pinctrl core: initialized pinctrl subsystem
[ 0.037469] DMI not present or invalid.
[ 0.037857] NET: Registered protocol family 16
[ 0.044305] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.045163] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.046054] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.046114] audit: initializing netlink subsys (disabled)
[ 0.046324] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.046878] thermal_sys: Registered thermal governor 'step_wise'
[ 0.046883] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.047160] cpuidle: using governor menu
[ 0.047415] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.047486] ASID allocator initialised with 65536 entries
[ 0.048411] Serial: AMBA PL011 UART driver
[ 0.048471] imx mu driver is registered.
[ 0.048489] imx rpmsg driver is registered.
[ 0.075665] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[ 0.092688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.092701] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.092707] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.092715] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.093612] cryptd: max_cpu_qlen set to 1000
[ 0.096592] ACPI: Interpreter disabled.
[ 0.097367] iommu: Default domain type: Translated
[ 0.097507] vgaarb: loaded
[ 0.097784] SCSI subsystem initialized
[ 0.098086] usbcore: registered new interface driver usbfs
[ 0.098127] usbcore: registered new interface driver hub
[ 0.098158] usbcore: registered new device driver usb
[ 0.099426] mc: Linux media interface: v0.10
[ 0.099457] videodev: Linux video capture interface: v2.00
[ 0.099521] pps_core: LinuxPPS API ver. 1 registered
[ 0.099528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.099541] PTP clock support registered
[ 0.099768] EDAC MC: Ver: 3.0.0
[ 0.100860] FPGA manager framework
[ 0.100938] Advanced Linux Sound Architecture Driver Initialized.
[ 0.101522] Bluetooth: Core ver 2.22
[ 0.101546] NET: Registered protocol family 31
[ 0.101553] Bluetooth: HCI device and connection manager initialized
[ 0.101565] Bluetooth: HCI socket layer initialized
[ 0.101573] Bluetooth: L2CAP socket layer initialized
[ 0.101588] Bluetooth: SCO socket layer initialized
[ 0.102302] clocksource: Switched to clocksource arch_sys_counter
[ 0.102461] VFS: Disk quotas dquot_6.6.0
[ 0.102513] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.102671] pnp: PnP ACPI: disabled
[ 0.108494] NET: Registered protocol family 2
[ 0.108646] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.110114] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.110188] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.110427] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.110887] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.110999] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.111077] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.111268] NET: Registered protocol family 1
[ 0.111651] RPC: Registered named UNIX socket transport module.
[ 0.111657] RPC: Registered udp transport module.
[ 0.111664] RPC: Registered tcp transport module.
[ 0.111669] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.112377] PCI: CLS 0 bytes, default 64
[ 0.112981] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.113653] kvm [1]: IPA Size Limit: 40 bits
[ 0.115078] kvm [1]: GICv3: no GICV resource entry
[ 0.115085] kvm [1]: disabling GICv2 emulation
[ 0.115103] kvm [1]: GIC system register CPU interface enabled
[ 0.115173] kvm [1]: vgic interrupt IRQ9
[ 0.115274] kvm [1]: Hyp mode initialized successfully
[ 0.118102] Initialise system trusted keyrings
[ 0.118223] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.123842] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124420] NFS: Registering the id_resolver key type
[ 0.124445] Key type id_resolver registered
[ 0.124451] Key type id_legacy registered
[ 0.124527] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.124535] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.124557] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.124892] 9p: Installing v9fs 9p2000 file system support
[ 0.161309] Key type asymmetric registered
[ 0.161318] Asymmetric key parser 'x509' registered
[ 0.161350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[ 0.161357] io scheduler mq-deadline registered
[ 0.161362] io scheduler kyber registered
[ 0.167027] EINJ: ACPI disabled.
[ 0.175686] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.175702] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[ 0.183008] mxs-dma 33000000.dma-controller: initialized
[ 0.184923] Bus freq driver module loaded
[ 0.190543] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.192834] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 44, base_baud = 5000000) is a IMX
[ 0.193538] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 45, base_baud = 1500000) is a IMX
[ 1.192281] printk: console [ttymxc1] enabled
[ 1.203847] imx-drm 32c00000.bus:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)
[ 1.212714] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200
[ 1.219742] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi
[ 1.228022] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -517
[ 1.246118] loop: module loaded
[ 1.250206] of_reserved_mem_lookup() returned NULL
[ 1.255087] megasas: 07.714.04.00-rc1
[ 1.260193] imx ahci driver is registered.
[ 1.267918] spi-nor spi0.0: n25q256ax1 (32768 Kbytes)
[ 1.276400] libphy: Fixed MDIO Bus: probed
[ 1.281804] tun: Universal TUN/TAP device driver, 1.6
[ 1.287550] thunder_xcv, ver 1.0
[ 1.290820] thunder_bgx, ver 1.0
[ 1.294079] nicpf, ver 1.0
[ 1.297656] pps pps0: new PPS source ptp0
[ 1.307795] hclge is initializing
[ 1.311148] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.318378] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.323736] e1000: Intel(R) PRO/1000 Network Driver
[ 1.328641] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.334465] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.339440] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.345397] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.350801] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.356408] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.362682] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.368633] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 1.374731] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 1.380653] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
[ 1.388423] ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
[ 1.394617] ixgb: Intel(R) PRO/10GbE Network Driver
[ 1.399509] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.405210] Intel(R) Ethernet Switch Host Interface Driver
[ 1.410702] Copyright(c) 2013 - 2019 Intel Corporation.
[ 1.416036] ice: Intel(R) Ethernet Connection E800 Series Linux Driver
[ 1.422575] ice: Copyright (c) 2018, Intel Corporation.
[ 1.428085] sky2: driver version 1.30
[ 1.432271] usbcore: registered new interface driver r8152
[ 1.437795] usbcore: registered new interface driver asix
[ 1.443232] usbcore: registered new interface driver ax88179_178a
[ 1.449358] usbcore: registered new interface driver cdc_ether
[ 1.455231] usbcore: registered new interface driver net1080
[ 1.460926] usbcore: registered new interface driver cdc_subset
[ 1.466879] usbcore: registered new interface driver zaurus
[ 1.472498] usbcore: registered new interface driver cdc_ncm
[ 1.478414] VFIO - User Level meta-driver version: 0.3
[ 1.485601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.492149] ehci-pci: EHCI PCI platform driver
[ 1.496629] ehci-platform: EHCI generic platform driver
[ 1.502034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.508239] ohci-pci: OHCI PCI platform driver
[ 1.512716] ohci-platform: OHCI generic platform driver
[ 1.518617] usbcore: registered new interface driver uas
[ 1.523975] usbcore: registered new interface driver usb-storage
[ 1.530050] usbcore: registered new interface driver usbserial_generic
[ 1.536601] usbserial: USB Serial support registered for generic
[ 1.542642] usbcore: registered new interface driver ftdi_sio
[ 1.548411] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.555756] usbcore: registered new interface driver usb_serial_simple
[ 1.562309] usbserial: USB Serial support registered for carelink
[ 1.568425] usbserial: USB Serial support registered for zio
[ 1.574102] usbserial: USB Serial support registered for funsoft
[ 1.580128] usbserial: USB Serial support registered for flashloader
[ 1.586511] usbserial: USB Serial support registered for google
[ 1.592450] usbserial: USB Serial support registered for libtransistor
[ 1.598998] usbserial: USB Serial support registered for vivopay
[ 1.605027] usbserial: USB Serial support registered for moto_modem
[ 1.611316] usbserial: USB Serial support registered for motorola_tetra
[ 1.617949] usbserial: USB Serial support registered for novatel_gps
[ 1.624326] usbserial: USB Serial support registered for hp4x
[ 1.630091] usbserial: USB Serial support registered for suunto
[ 1.636033] usbserial: USB Serial support registered for siemens_mpi
[ 1.642420] usbcore: registered new interface driver usb_ehset_test
[ 1.651251] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
[ 1.665976] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
[ 1.672196] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
[ 1.681432] i2c /dev entries driver
[ 1.688497] Bluetooth: HCI UART driver ver 2.3
[ 1.692968] Bluetooth: HCI UART protocol H4 registered
[ 1.698113] Bluetooth: HCI UART protocol BCSP registered
[ 1.703448] Bluetooth: HCI UART protocol LL registered
[ 1.708596] Bluetooth: HCI UART protocol ATH3K registered
[ 1.714022] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.720371] Bluetooth: HCI UART protocol Broadcom registered
[ 1.726055] Bluetooth: HCI UART protocol QCA registered
[ 1.732711] sdhci: Secure Digital Host Controller Interface driver
[ 1.738909] sdhci: Copyright(c) Pierre Ossman
[ 1.743592] Synopsys Designware Multimedia Card Interface Driver
[ 1.750170] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.756991] sdhci-esdhc-imx 30b40000.mmc: voltage-ranges unspecified
[ 1.757074] sdhci-esdhc-imx 30b50000.mmc: voltage-ranges unspecified
[ 1.758975] sdhci-esdhc-imx 30b60000.mmc: voltage-ranges unspecified
[ 1.776484] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.783274] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.790217] usbcore: registered new interface driver usbhid
[ 1.790749] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[ 1.795799] usbhid: USB HID core driver
[ 1.802228] galcore: clk_get vg clock failed, disable vg!
[ 1.812485] Galcore version 6.4.3.p2.336687
[ 1.876943] [drm] Initialized vivante 1.0.0 20170808 for 38000000.gpu on minor 0
[ 1.886060] hantrodec 0 : module inserted. Major = 510
[ 1.886148] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 1.891905] hantrodec 1 : module inserted. Major = 510
[ 1.899029] mmcblk2: mmc2:0001 TX2932 29.1 GiB
[ 1.903745] hx280enc: module inserted. Major <509>
[ 1.907472] mmcblk2boot0: mmc2:0001 TX2932 partition 1 4.00 MiB
[ 1.918211] mmcblk2boot1: mmc2:0001 TX2932 partition 2 4.00 MiB
[ 1.924278] mmcblk2rpmb: mmc2:0001 TX2932 partition 3 4.00 MiB, chardev (511:0)
[ 1.932097] fsl-micfil-dai 30080000.micfil: GET IRQ: 23
[ 1.936550] mmcblk2: p1 p2
[ 1.937367] fsl-micfil-dai 30080000.micfil: GET IRQ: 24
[ 1.945389] fsl-micfil-dai 30080000.micfil: GET IRQ: 25
[ 1.950635] fsl-micfil-dai 30080000.micfil: GET IRQ: 26
[ 1.958607] imx-ak4458 sound-ak4458: failed to find SAI platform device
[ 1.965245] imx-ak4458: probe of sound-ak4458 failed with error -22
[ 1.974688] NET: Registered protocol family 26
[ 1.979600] NET: Registered protocol family 10
[ 1.985209] Segment Routing with IPv6
[ 1.988932] NET: Registered protocol family 17
[ 1.994409] Bluetooth: RFCOMM TTY layer initialized
[ 1.999304] Bluetooth: RFCOMM socket layer initialized
[ 2.004472] Bluetooth: RFCOMM ver 1.11
[ 2.008235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.013552] Bluetooth: BNEP filters: protocol multicast
[ 2.018787] Bluetooth: BNEP socket layer initialized
[ 2.023758] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.029688] Bluetooth: HIDP socket layer initialized
[ 2.034692] 8021q: 802.1Q VLAN Support v1.8
[ 2.038896] lib80211: common routines for IEEE802.11 drivers
[ 2.044663] 9pnet: Installing 9P2000 support
[ 2.048974] tsn generic netlink module v1 init...
[ 2.053761] Key type dns_resolver registered
[ 2.058981] registered taskstats version 1
[ 2.063092] Loading compiled-in X.509 certificates
[ 2.088334] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
[ 2.096326] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
[ 2.123520] LDO6: supplied by regulator-dummy
[ 2.128991] i2c i2c-0: IMX I2C adapter registered
[ 2.135194] adv7511 1-003d: supply avdd not found, using dummy regulator
[ 2.142009] adv7511 1-003d: supply dvdd not found, using dummy regulator
[ 2.148752] adv7511 1-003d: supply pvdd not found, using dummy regulator
[ 2.155496] adv7511 1-003d: supply a2vdd not found, using dummy regulator
[ 2.162333] adv7511 1-003d: supply v3p3 not found, using dummy regulator
[ 2.169091] adv7511 1-003d: supply v1p2 not found, using dummy regulator
[ 2.176536] adv7511 1-003d: Probe failed. Remote port 'mipi_dsi@32e10000' disabled
[ 2.184248] i2c i2c-1: IMX I2C adapter registered
[ 2.190346] pca953x 2-0020: using no AI
[ 2.196914] ak4458 2-0010: Failed to request supplies: -517
[ 2.202910] ak4458 2-0012: Failed to request supplies: -517
[ 2.210499] ak5558 2-0013: Failed to request supplies: -517
[ 2.217526] ak4458 2-0011: Failed to request supplies: -517
[ 2.223203] i2c i2c-2: IMX I2C adapter registered
[ 2.229046] i2c i2c-3: IMX I2C adapter registered
[ 2.235336] SoC: i.MX8MM revision 1.0
[ 2.235655] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator
[ 2.239350] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 2 supported-hw 0x4 0x4
[ 2.247239] imx6q-pcie 33800000.pcie: EXT REF_CLK is used!.
[ 2.260085] imx-drm 32c00000.bus:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)
[ 2.262093] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us.
[ 2.270027] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200
[ 2.276187] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:
[ 2.283151] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi
[ 2.290352] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000
[ 2.298602] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -19
[ 2.306791] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000
[ 2.314438] imx-drm 32c00000.bus:display-subsystem: bound 32e10000.mipi_dsi (ops imx_sec_dsim_ops)
[ 2.322677] imx6q-pcie 33800000.pcie: invalid resource
[ 2.331950] [drm] Initialized imx-drm 1.0.0 20120507 for 32c00000.bus:display-subsystem on minor 1
[ 2.347076] pps pps0: new PPS source ptp0
[ 2.355739] libphy: fec_enet_mii_bus: probed
[ 2.362398] fec 30be0000.ethernet eth0: registered PHC device 0
[ 2.371069] sdhci-esdhc-imx 30b40000.mmc: voltage-ranges unspecified
[ 2.371587] sdhci-esdhc-imx 30b50000.mmc: voltage-ranges unspecified
[ 2.373313] debugfs: File 'Playback' in directory 'dapm' already present!
[ 2.373322] debugfs: File 'Capture' in directory 'dapm' already present!
[ 2.377490] sdhci-esdhc-imx 30b40000.mmc: allocated mmc-pwrseq
[ 2.383866] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[ 2.421715] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
[ 2.428235] imx6q-pcie 33800000.pcie: Link up
[ 2.433143] imx6q-pcie 33800000.pcie: Link up
[ 2.437506] imx6q-pcie 33800000.pcie: Link up, Gen1
[ 2.439953] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.475858] random: fast init done
[ 2.550813] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00
[ 2.557183] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.562719] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.568919] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff]
[ 2.575843] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 2.581875] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.588324] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 2.595069] pci 0000:00:00.0: supports D1
[ 2.599083] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.607385] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[ 2.613478] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
[ 2.619829] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x001f]
[ 2.625437] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
[ 2.632165] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.652957] pci 0000:00:00.0: BAR 0: assigned [mem 0x18000000-0x180fffff]
[ 2.659772] pci 0000:00:00.0: BAR 14: assigned [mem 0x18100000-0x181fffff]
[ 2.666699] pci 0000:00:00.0: BAR 6: assigned [mem 0x18200000-0x1820ffff pref]
[ 2.673947] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.680156] pci 0000:01:00.0: BAR 0: assigned [mem 0x18100000-0x1817ffff]
[ 2.686976] pci 0000:01:00.0: BAR 3: assigned [mem 0x18180000-0x18183fff]
[ 2.688560] ak4458 2-0010: Failed to set acks: -6
[ 2.693967] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
[ 2.699603] ak4458 2-0012: Failed to set acks: -6
[ 2.704612] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.714541] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 2.714587] ak4458 2-0011: Failed to set acks: -6
[ 2.720658] pci 0000:00:00.0: bridge window [mem 0x18100000-0x181fffff]
[ 2.731027] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.732478] pcieport 0000:00:00.0: PME: Signaling with IRQ 233
[ 2.742010] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.746508] pci 0000:01:00.0: 2022/10/18 Test 1 Writing Expansion ROM BAR to avoid overlapping
[ 2.752384] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.760907] pci 0000:01:00.0: pci_fixup_write_rom_bar+0x0/0xac took 14065 usecs
[ 2.773815] ALSA device list:
[ 2.777020] igb 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.779795] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 2.786075] adapter->flags |= IGB_FLAG_HAS_MSIX 33333333333333 adapter->flags = 8192
[ 2.793193] #0: imx-audio-micfil
[ 2.793197] #1: bt-sco-audio
[ 2.801028] adapter->flags |= IGB_FLAG_HAS_MSIX 4444444444 adapter->flags = 8200
[ 2.801030] adapter->flags |= IGB_FLAG_HAS_MSIX 5555555555 msix = 0
[ 2.801033] igb_set_interrupt_capability mxi only XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[ 2.829430] adapter->flags &= ~IGB_FLAG_HAS_MSIX 11111111111111 adapter->flags = 8
[ 2.867989] pps pps1: new PPS source ptp1
[ 2.872711] igb 0000:01:00.0: added PHC on eth1
[ 2.877308] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.884209] igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:a0:c9:00:00:00
[ 2.891428] igb 0000:01:00.0: eth1: PBA No: 000500-000
[ 2.896583] igb 0000:01:00.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
[ 2.981567] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.989737] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.996689] devtmpfs: mounted
[ 3.000441] Freeing unused kernel memory: 3008K
[ 3.005042] Run /sbin/init as init process
[ 3.095125] systemd[1]: System time before build time, advancing clock.
[ 3.114567] systemd[1]: systemd 247 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.136867] systemd[1]: Detected architecture arm64.
Welcome to NXP i.MX Release Distro 5.10-hardknott (hardknott)!
[ 3.178983] systemd[1]: Set hostname to <a100>.
[ 3.187585] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.194358] systemd[1]: Initializing machine ID from random generator.
[ 3.252410] systemd-sysv-generator[214]: SysV service '/etc/init.d/rc.local' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 3.373075] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 3.473850] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.482266] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.535969] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 3.558453] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.567140] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 3.592686] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 3.617017] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 3.638952] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 3.662872] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 3.686890] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 3.702456] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 3.722444] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 3.738443] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 3.760959] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 3.782630] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 3.802657] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 3.827075] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 3.847077] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.871563] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 3.890946] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 3.915793] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 3.939468] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 3.963114] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 3.990338] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 4.014244] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 4.042136] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 4.067189] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 4.079533] systemd[1]: Mounting Temporary Directory (/tmp)...
Mounting Temporary Directory (/tmp)...
[ 4.104021] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[ 4.118163] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 4.141996] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 4.165642] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 4.191611] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 4.210564] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.220135] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 4.233027] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 4.245545] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.267502] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[ 4.278704] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 4.300414] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
[ 4.317451] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 4.338872] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 4.361913] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 4.387661] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 4.407031] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Temporary Directory (/tmp).
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Setup Virtual Console.
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
[ 4.644877] systemd-journald[224]: Received client request to flush runtime journal.
Starting Create System Users...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Mounted /var/volatile.
Starting Start Psplash Boot Screen...
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.
Starting Rebuild Dynamic Linker Cache...
Starting Create Volatile Files and Directories...
[ OK ] Started Start Psplash Boot Screen.
[ OK ] Started Start psplash-syst…progress communication helper.
[ OK ] Finished Create Volatile Files and Directories.
Starting Rebuild Journal Catalog...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target Sound Card.
[ OK ] Finished Rebuild Dynamic Linker Cache.
Starting Update is Completed...
[ OK ] Finished Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on dropbear.socket.
Starting Weston socket.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Listening on Weston socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Linux Firmware Loader Daemon.
[ 5.845118] cfg80211: failed to load regulatory.db
[ 5.850170] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[ 5.860657] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[ 5.871620] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware
[ 5.880183] imx-sdma 302b0000.dma-controller: external firmware not found, using ROM firmware
[ 5.888899] imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware
[ OK ] Started Configuration for i.MX GPU (Former rc_gpu.S).
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
Starting Network Time Service (one-shot ntpdate mode)...
[ OK ] Started Updates psplash to basic.
Starting User Login Management...
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Finished Network Time Service (one-shot ntpdate mode).
[ OK ] Reached target Network (Pre).
Starting Network Service...
[ OK ] Started User Login Management.
[ OK ] Created slice system-systemd\x2dfsck.slice.
Starting File System Check on /dev/mmcblk2p1...
[ OK ] Started Network Service.
[ 6.199897] 8021q: adding VLAN 0 to HW filter on device eth1
Starting Network Name Resolution...
[ OK ] Finished File System Check on /dev/mmcblk2p1.
Mounting /run/media/mmcblk2p1...
[ 6.274815] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver [Qualcomm Atheros AR8031/AR8033] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ OK ] Mounted /run/media/mmcblk2p1.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
Starting containerd container runtime...
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[ OK ] Started Update psplash to network.
Starting Terminate Psplash Boot Screen...
Starting /etc/rc.local Compatibility...
Starting Permit User Sessions...
[FAILED] Failed to start Terminate Psplash Boot Screen.
See 'systemctl status psplash-quit.service' for details.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttymxc1.
[ OK ] Reached target Login Prompts.
Starting Weston, a Wayland…ositor, as a system service...
Starting User Database Manager...
[ OK ] Started User Database Manager.
[ OK ] Created slice User Slice of UID 0.
Starting User Runtime Directory /run/user/0...
[ OK ] Finished User Runtime Directory /run/user/0.
Starting User Manager for UID 0...
[ 6.869050] audit: type=1006 audit(1616581521.768:2): pid=480 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
[ 7.014334] random: crng init done
[ 7.017750] random: 7 urandom warning(s) missed due to ratelimiting
[ OK ] Finished Load/Save Random Seed.
[ OK ] Started containerd container runtime.
[ OK ] Reached target Multi-User System.
[ OK ] Started User Manager for UID 0.
[ OK ] Started Session c1 of user root.
[ 7.196311] audit: type=1006 audit(1616581522.096:3): pid=470 uid=0 old-auid=4294967295 auid=0 tty=tty7 old-ses=4294967295 ses=2 res=1
[FAILED] Failed to start Weston, a …mpositor, as a system service.
See 'systemctl status weston.service' for details.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
NXP i.MX Release Distro 5.10-hardknott a100 ttymxc1
a100 login:
a100 login:
a100 login: root
root@a100:~# cd ..
root@a100:/home# cd ..
root@a100:/# lspci
00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
01:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
root@a100:/# lspci -vv
00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01) (prog-if 00 [Normal decode])
Device tree node: /sys/firmware/devicetree/base/soc@0/pcie@33800000/host@0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 233
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [size=1M]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: 18100000-181fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
Expansion ROM at 18200000 [virtual] [disabled] [size=64K]
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable+ 64bit-
Address: fc001000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP+ LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [148 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=10us
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: pcieport
01:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
Device tree node: /sys/firmware/devicetree/base/soc@0/pcie@33800000/host@0/i210@0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 234
Region 0: Memory at 18100000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1000 [disabled] [size=32]
Region 3: Memory at 18180000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable+ 64bit+
Address: 00000000fc001000 Data: 0001
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable- Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend+
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Device Serial Number 00-a0-c9-ff-ff-00-00-00
Capabilities: [1a0 v1] Transaction Processing Hints
Device specific mode supported
Steering table in TPH capability structure
Kernel driver in use: igb
root@a100:/# [ 33.759009] VSD_3V3: disabling
root@a100:/#
root@a100:/# dmesh | grep MSI
-sh: dmesh: command not found
root@a100:/# dmesg | grep MSI
[ 2.786075] adapter->flags |= IGB_FLAG_HAS_MSIX 33333333333333 adapter->flags = 8192
[ 2.801028] adapter->flags |= IGB_FLAG_HAS_MSIX 4444444444 adapter->flags = 8200
[ 2.801030] adapter->flags |= IGB_FLAG_HAS_MSIX 5555555555 msix = 0
[ 2.829430] adapter->flags &= ~IGB_FLAG_HAS_MSIX 11111111111111 adapter->flags = 8
[ 2.896583] igb 0000:01:00.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
root@a100:/# [ 82.939255] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 82.948776] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 84.830897] igb 0000:01:00.0: Detected Tx Unit Hang
[ 84.830897] Tx Queue <0>
[ 84.830897] TDH <0>
[ 84.830897] TDT <1>
[ 84.830897] next_to_use <1>
[ 84.830897] next_to_clean <0>
[ 84.830897] buffer_info[next_to_clean]
[ 84.830897] time_stamp <ffff2c0b>
[ 84.830897] next_to_watch <000000000839f4e3>
[ 84.830897] jiffies <ffff2de0>
[ 84.830897] desc.status <4f4000>
[ 86.846898] igb 0000:01:00.0: Detected Tx Unit Hang
[ 86.846898] Tx Queue <0>
[ 86.846898] TDH <0>
[ 86.846898] TDT <1>
[ 86.846898] next_to_use <1>
[ 86.846898] next_to_clean <0>
[ 86.846898] buffer_info[next_to_clean]
[ 86.846898] time_stamp <ffff2c0b>
[ 86.846898] next_to_watch <000000000839f4e3>
[ 86.846898] jiffies <ffff2fd8>
[ 86.846898] desc.status <4f4000>
[ 88.030657] ------------[ cut here ]------------
[ 88.035307] NETDEV WATCHDOG: eth1 (igb): transmit queue 0 timed out
[ 88.041646] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:485 dev_watchdog+0x300/0x310
[ 88.049911] Modules linked in:
[ 88.052974] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.72-lts-5.10.y+g22ec7e8cbace #1
[ 88.061150] Hardware name: FSL i.MX8MM EVK board (DT)
[ 88.066204] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[ 88.072213] pc : dev_watchdog+0x300/0x310
[ 88.076221] lr : dev_watchdog+0x300/0x310
[ 88.080230] sp : ffff800011e1bd90
[ 88.083544] x29: ffff800011e1bd90 x28: ffff0000c13e1940
[ 88.088861] x27: 0000000000000004 x26: ffff0000c1758480
[ 88.094180] x25: 0000000000000140 x24: 00000000ffffffff
[ 88.099496] x23: ffff0000c17583dc x22: 0000000000000000
[ 88.104811] x21: ffff800011c06000 x20: ffff0000c1758000
[ 88.110127] x19: 0000000000000000 x18: 0000000000000030
[ 88.115442] x17: 0000000000000000 x16: 0000000000000000
[ 88.120757] x15: ffff800011c127f8 x14: ffffffffffffffff
[ 88.126075] x13: ffff800011c217b0 x12: 00000000000005e2
[ 88.131392] x11: 00000000000001f6 x10: ffff800011c797b0
[ 88.136709] x9 : 00000000fffff000 x8 : ffff800011c217b0
[ 88.142025] x7 : ffff800011c797b0 x6 : 0000000000000003
[ 88.147340] x5 : 0000000000000000 x4 : 0000000000000000
[ 88.152655] x3 : 0000000000000000 x2 : 0000000000000100
[ 88.157970] x1 : 015ac0a0f75fb200 x0 : 0000000000000000
[ 88.163286] Call trace:
[ 88.165736] dev_watchdog+0x300/0x310
[ 88.169403] call_timer_fn.constprop.0+0x24/0x80
[ 88.174023] __run_timers.part.0+0x1f4/0x22c
[ 88.178294] run_timer_softirq+0x3c/0x7c
[ 88.182218] efi_header_end+0x124/0x290
[ 88.186056] irq_exit+0xdc/0xfc
[ 88.189200] __handle_domain_irq+0x80/0xe0
[ 88.193299] gic_handle_irq+0xc0/0x140
[ 88.197050] el1_irq+0xcc/0x180
[ 88.200194] cpuidle_enter_state+0x130/0x2f0
[ 88.204464] cpuidle_enter+0x38/0x50
[ 88.208043] do_idle+0x218/0x2a0
[ 88.211273] cpu_startup_entry+0x24/0x70
[ 88.215199] rest_init+0xd8/0xe8
[ 88.218431] arch_call_rest_init+0x10/0x1c
[ 88.222527] start_kernel+0x4ac/0x4e4
[ 88.226189] ---[ end trace 098ecebcbc5bc30b ]---
[ 88.230904] igb 0000:01:00.0 eth1: Reset adapter
[ 91.095269] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 93.919560] igb 0000:01:00.0: Detected Tx Unit Hang
[ 93.919560] Tx Queue <0>
[ 93.919560] TDH <0>
[ 93.919560] TDT <1>
[ 93.919560] next_to_use <1>
[ 93.919560] next_to_clean <0>
[ 93.919560] buffer_info[next_to_clean]
[ 93.919560] time_stamp <ffff3403>
[ 93.919560] next_to_watch <000000000839f4e3>
[ 93.919560] jiffies <ffff36c0>
[ 93.919560] desc.status <168000>
[ 95.839187] igb 0000:01:00.0: Detected Tx Unit Hang
[ 95.839187] Tx Queue <0>
[ 95.839187] TDH <0>
[ 95.839187] TDT <1>
[ 95.839187] next_to_use <1>
[ 95.839187] next_to_clean <0>
[ 95.839187] buffer_info[next_to_clean]
[ 95.839187] time_stamp <ffff3403>
[ 95.839187] next_to_watch <000000000839f4e3>
[ 95.839187] jiffies <ffff38a0>
[ 95.839187] desc.status <168000>
[ 96.990736] igb 0000:01:00.0 eth1: Reset adapter
[ 99.919284] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 101.823266] igb 0000:01:00.0: Detected Tx Unit Hang
[ 101.823266] Tx Queue <0>
[ 101.823266] TDH <0>
[ 101.823266] TDT <1>
[ 101.823266] next_to_use <1>
[ 101.823266] next_to_clean <0>
[ 101.823266] buffer_info[next_to_clean]
[ 101.823266] time_stamp <ffff3ca1>
[ 101.823266] next_to_watch <000000000839f4e3>
[ 101.823266] jiffies <ffff3e78>
[ 101.823266] desc.status <168000>
[ 103.838872] igb 0000:01:00.0: Detected Tx Unit Hang
[ 103.838872] Tx Queue <0>
[ 103.838872] TDH <0>
[ 103.838872] TDT <1>
[ 103.838872] next_to_use <1>
[ 103.838872] next_to_clean <0>
[ 103.838872] buffer_info[next_to_clean]
[ 103.838872] time_stamp <ffff3ca1>
[ 103.838872] next_to_watch <000000000839f4e3>
[ 103.838872] jiffies <ffff4070>
[ 103.838872] desc.status <168000>
[ 105.822894] igb 0000:01:00.0: Detected Tx Unit Hang
[ 105.822894] Tx Queue <0>
[ 105.822894] TDH <0>
[ 105.822894] TDT <1>
[ 105.822894] next_to_use <1>
[ 105.822894] next_to_clean <0>
[ 105.822894] buffer_info[next_to_clean]
[ 105.822894] time_stamp <ffff3ca1>
[ 105.822894] next_to_watch <000000000839f4e3>
[ 105.822894] jiffies <ffff4260>
[ 105.822894] desc.status <168000>
[ 107.838890] igb 0000:01:00.0: Detected Tx Unit Hang
[ 107.838890] Tx Queue <0>
[ 107.838890] TDH <0>
[ 107.838890] TDT <1>
[ 107.838890] next_to_use <1>
[ 107.838890] next_to_clean <0>
[ 107.838890] buffer_info[next_to_clean]
[ 107.838890] time_stamp <ffff3ca1>
[ 107.838890] next_to_watch <000000000839f4e3>
[ 107.838890] jiffies <ffff4458>
[ 107.838890] desc.status <168000>
[ 109.822888] igb 0000:01:00.0: Detected Tx Unit Hang
[ 109.822888] Tx Queue <0>
[ 109.822888] TDH <0>
[ 109.822888] TDT <1>
[ 109.822888] next_to_use <1>
[ 109.822888] next_to_clean <0>
[ 109.822888] buffer_info[next_to_clean]
[ 109.822888] time_stamp <ffff3ca1>
[ 109.822888] next_to_watch <000000000839f4e3>
[ 109.822888] jiffies <ffff4648>
[ 109.822888] desc.status <168000>
[ 110.046719] igb 0000:01:00.0 eth1: Reset adapter
[ 112.995250] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 114.847284] igb 0000:01:00.0: Detected Tx Unit Hang
[ 114.847284] Tx Queue <0>
[ 114.847284] TDH <0>
[ 114.847284] TDT <1>
[ 114.847284] next_to_use <1>
[ 114.847284] next_to_clean <0>
[ 114.847284] buffer_info[next_to_clean]
[ 114.847284] time_stamp <ffff4966>
[ 114.847284] next_to_watch <000000000839f4e3>
[ 114.847284] jiffies <ffff4b30>
[ 114.847284] desc.status <168000>
[ 116.830913] igb 0000:01:00.0: Detected Tx Unit Hang
[ 116.830913] Tx Queue <0>
[ 116.830913] TDH <0>
[ 116.830913] TDT <1>
[ 116.830913] next_to_use <1>
[ 116.830913] next_to_clean <0>
[ 116.830913] buffer_info[next_to_clean]
[ 116.830913] time_stamp <ffff4966>
[ 116.830913] next_to_watch <000000000839f4e3>
[ 116.830913] jiffies <ffff4d20>
[ 116.830913] desc.status <168000>
[ 118.846885] igb 0000:01:00.0: Detected Tx Unit Hang
[ 118.846885] Tx Queue <0>
[ 118.846885] TDH <0>
[ 118.846885] TDT <1>
[ 118.846885] next_to_use <1>
[ 118.846885] next_to_clean <0>
[ 118.846885] buffer_info[next_to_clean]
[ 118.846885] time_stamp <ffff4966>
[ 118.846885] next_to_watch <000000000839f4e3>
[ 118.846885] jiffies <ffff4f18>
[ 118.846885] desc.status <168000>
[ 120.830892] igb 0000:01:00.0: Detected Tx Unit Hang
[ 120.830892] Tx Queue <0>
[ 120.830892] TDH <0>
[ 120.830892] TDT <1>
[ 120.830892] next_to_use <1>
[ 120.830892] next_to_clean <0>
[ 120.830892] buffer_info[next_to_clean]
[ 120.830892] time_stamp <ffff4966>
[ 120.830892] next_to_watch <000000000839f4e3>
[ 120.830892] jiffies <ffff5108>
[ 120.830892] desc.status <168000>
[ 122.846739] igb 0000:01:00.0 eth1: Reset adapter
[ 122.851419] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 122.986769] igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Down
[ 123.838873] igb 0000:01:00.0 eth1: Reset adapter
root@a100:/# dmesg | grep pci
[ 1.492149] ehci-pci: EHCI PCI platform driver
[ 1.508239] ohci-pci: OHCI PCI platform driver
[ 2.235655] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator
[ 2.247239] imx6q-pcie 33800000.pcie: EXT REF_CLK is used!.
[ 2.262093] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us.
[ 2.276187] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:
[ 2.290352] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000
[ 2.306791] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000
[ 2.322677] imx6q-pcie 33800000.pcie: invalid resource
[ 2.428235] imx6q-pcie 33800000.pcie: Link up
[ 2.433143] imx6q-pcie 33800000.pcie: Link up
[ 2.437506] imx6q-pcie 33800000.pcie: Link up, Gen1
[ 2.550813] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00
[ 2.557183] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.562719] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.568919] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff]
[ 2.575843] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 2.581875] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.588324] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 2.595069] pci 0000:00:00.0: supports D1
[ 2.599083] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.607385] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[ 2.613478] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
[ 2.619829] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x001f]
[ 2.625437] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
[ 2.632165] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.652957] pci 0000:00:00.0: BAR 0: assigned [mem 0x18000000-0x180fffff]
[ 2.659772] pci 0000:00:00.0: BAR 14: assigned [mem 0x18100000-0x181fffff]
[ 2.666699] pci 0000:00:00.0: BAR 6: assigned [mem 0x18200000-0x1820ffff pref]
[ 2.673947] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.680156] pci 0000:01:00.0: BAR 0: assigned [mem 0x18100000-0x1817ffff]
[ 2.686976] pci 0000:01:00.0: BAR 3: assigned [mem 0x18180000-0x18183fff]
[ 2.693967] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
[ 2.704612] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.714541] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 2.720658] pci 0000:00:00.0: bridge window [mem 0x18100000-0x181fffff]
[ 2.732478] pcieport 0000:00:00.0: PME: Signaling with IRQ 233
[ 2.746508] pci 0000:01:00.0: 2022/10/18 Test 1 Writing Expansion ROM BAR to avoid overlapping
[ 2.760907] pci 0000:01:00.0: pci_fixup_write_rom_bar+0x0/0xac took 14065 usecs
root@a100:/#
[-- Attachment #3: Type: text/plain, Size: 162 bytes --]
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
prev parent reply other threads:[~2022-10-19 14:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-216599-41252@https.bugzilla.kernel.org/>
2022-10-17 17:08 ` [Intel-wired-lan] [Bug 216599] New: i210 doesn't work and triggers netdev watchdog (Linux 5.10) Bjorn Helgaas
2022-10-18 6:59 ` jeffrey.tseng (曾弘)
2022-10-18 9:05 ` jeffrey.tseng (曾弘) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1b2a728d4c8e4f289277caa669be06dc@gigabyte.com \
--to=jeffrey.tseng@gigabyte.com \
--cc=anthony.l.nguyen@intel.com \
--cc=arthur.chen@gigabyte.com \
--cc=gary.liu@gigabyte.com \
--cc=helgaas@kernel.org \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tony.ku@gigabyte.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox