From: Jacob Keller <jacob.e.keller@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH] i40e: fix handling of HW ATR eviction
Date: Thu, 4 May 2017 14:16:36 -0700 [thread overview]
Message-ID: <20170504211636.21192-1-jacob.e.keller@intel.com> (raw)
A recent commit to refactor the driver and remove the hw_disabled_flags
field accidentally introduced two regressions. First, we overwrote
pf->flags which removed various key flags including the MSI-X settings.
Additionally, it was intended that we have now two flags,
HW_ATR_EVICT_CAPABLe and HW_ATR_EVICT_ENABLED, but this was not done,
and we accidentally were mis-using HW_ATR_EVICT_CAPABLE everywhere.
This patch adds the missing piece, HW_ATR_EVICT_ENABLED, and safely
updates pf->flags instead of overwriting it.
Without this patch we will have many problems including disabling MSI-X
support, and we'll attempt to use HW ATR eviction on devices which do
not support it.
Fixes: 47994c119a36 ("i40e: remove hw_disabled_flags in favor of using separate flag bits", 2017-04-19)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
Ok. For real, this actually cleans up and adds the missing feature that
we should have had. I'm working on the rest, but this should fix the
issue you were seeing without introducing other regressions.
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_main.c | 7 ++++---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++--
4 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 60dc9b2c19ff..395ca94faf80 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -399,6 +399,7 @@ struct i40e_pf {
#define I40E_FLAG_RX_CSUM_ENABLED BIT_ULL(1)
#define I40E_FLAG_MSI_ENABLED BIT_ULL(2)
#define I40E_FLAG_MSIX_ENABLED BIT_ULL(3)
+#define I40E_FLAG_HW_ATR_EVICT_ENABLED BIT_ULL(4)
#define I40E_FLAG_RSS_ENABLED BIT_ULL(6)
#define I40E_FLAG_VMDQ_ENABLED BIT_ULL(7)
#define I40E_FLAG_IWARP_ENABLED BIT_ULL(10)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 35a246f05520..3d58762efbc0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -225,7 +225,7 @@ static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENABLED, 0),
I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
- I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_CAPABLE, 0),
+ I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENABLED, 0),
I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX, 0),
};
@@ -4093,7 +4093,7 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
/* Only allow ATR evict on hardware that is capable of handling it */
if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE)
- pf->flags &= ~I40E_FLAG_HW_ATR_EVICT_CAPABLE;
+ pf->flags &= ~I40E_FLAG_HW_ATR_EVICT_ENABLED;
if (changed_flags & I40E_FLAG_TRUE_PROMISC_SUPPORT) {
u16 sw_flags = 0, valid_flags = 0;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e4eb97832413..6200a9a55dc2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8822,11 +8822,12 @@ static int i40e_sw_init(struct i40e_pf *pf)
(pf->hw.aq.api_min_ver > 4))) {
/* Supported in FW API version higher than 1.4 */
pf->flags |= I40E_FLAG_GENEVE_OFFLOAD_CAPABLE;
- pf->flags = I40E_FLAG_HW_ATR_EVICT_CAPABLE;
- } else {
- pf->flags = I40E_FLAG_HW_ATR_EVICT_CAPABLE;
}
+ /* Enable HW ATR eviction if possible */
+ if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE)
+ pf->flags |= I40E_FLAG_HW_ATR_EVICT_ENABLED;
+
pf->eeprom_version = 0xDEAD;
pf->lan_veb = I40E_NO_VEB;
pf->lan_vsi = I40E_NO_VSI;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index c2e9013d05eb..3ef82f237f9e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2340,7 +2340,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
/* Due to lack of space, no more new filters can be programmed */
if (th->syn && (pf->flags & I40E_FLAG_FD_ATR_AUTO_DISABLED))
return;
- if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) {
+ if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) {
/* HW ATR eviction will take care of removing filters on FIN
* and RST packets.
*/
@@ -2402,7 +2402,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
- if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE)
+ if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED)
dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK;
fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
--
2.13.0.rc0.317.gcc792a6cad5a
next reply other threads:[~2017-05-04 21:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 21:16 Jacob Keller [this message]
2017-05-04 21:53 ` [Intel-wired-lan] [PATCH] i40e: fix handling of HW ATR eviction Jeff Kirsher
2017-05-04 23:29 ` Keller, Jacob E
2017-05-04 22:40 ` Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170504211636.21192-1-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox