From: Richard Cochran <richardcochran@gmail.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [RFC net-next 0/5] TSN: Add qdisc-based config interfaces for traffic shapers
Date: Wed, 20 Sep 2017 07:56:16 +0200 [thread overview]
Message-ID: <20170920055616.snd6tndvbdnesnck@localhost> (raw)
In-Reply-To: <20170920015911.18999-1-levipearson@gmail.com>
On Tue, Sep 19, 2017 at 07:59:11PM -0600, levipearson at gmail.com wrote:
> If some endpoint device shows up with direct Qbv support, this interface would
> probably work well there too, although a talker would need to be able to
> schedule its transmits pretty precisely to achieve the lowest possible latency.
This is an argument for SO_TXTIME.
> One concern here is calling the base-time parameter an interval; it's really
> an absolute time with respect to the PTP timescale. Good documentation will
> be important to this one, since the specification discusses some subtleties
> regarding the impact of different time values chosen here.
>
> The format for specifying the actual intervals such as cycle-time could prove
> to be an important detail as well; Qbv specifies cycle-time as a ratio of two
> integers expressed in seconds, while extension-time is specified as an integer
> number of nanoseconds.
>
> Precision with the cycle-time is especially important, since base-time can be
> almost arbitrarily far in the past or future, and any given cycle start should
> be calculable from the base-time plus/minus some integer multiple of cycle-
> time.
The above three points also.
Thanks,
Richard
prev parent reply other threads:[~2017-09-20 5:56 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-01 1:26 [Intel-wired-lan] [RFC net-next 0/5] TSN: Add qdisc-based config interfaces for traffic shapers Vinicius Costa Gomes
2017-09-01 1:26 ` [Intel-wired-lan] [RFC net-next 1/5] net/sched: Introduce the user API for the CBS shaper Vinicius Costa Gomes
2017-09-01 1:26 ` [Intel-wired-lan] [RFC net-next 2/5] net/sched: Introduce Credit Based Shaper (CBS) qdisc Vinicius Costa Gomes
2017-09-08 13:43 ` Henrik Austad
2017-09-14 0:39 ` Vinicius Costa Gomes
2017-09-01 1:26 ` [Intel-wired-lan] [RFC net-next 3/5] igb: Add support for CBS offload Vinicius Costa Gomes
2017-09-01 1:26 ` [Intel-wired-lan] [RFC net-next 4/5] sample: Add TSN Talker and Listener examples Vinicius Costa Gomes
2017-09-01 1:26 ` [Intel-wired-lan] [RFC net-next 5/5] samples/tsn: Add script for calculating CBS config Vinicius Costa Gomes
2017-09-01 13:03 ` [Intel-wired-lan] [RFC net-next 0/5] TSN: Add qdisc-based config interfaces for traffic shapers Richard Cochran
2017-09-01 16:12 ` Jesus Sanchez-Palencia
2017-09-01 16:53 ` Richard Cochran
2017-09-05 7:20 ` Richard Cochran
2017-09-07 5:34 ` Henrik Austad
2017-09-07 12:40 ` Richard Cochran
2017-09-07 15:27 ` Henrik Austad
2017-09-07 15:53 ` Richard Cochran
2017-09-07 16:18 ` Henrik Austad
2017-09-07 21:51 ` Guedes, Andre
2017-09-07 19:58 ` Guedes, Andre
2017-09-08 6:06 ` Henrik Austad
2017-09-08 1:29 ` Vinicius Costa Gomes
2017-09-12 4:56 ` Richard Cochran
2017-09-18 8:02 ` Richard Cochran
2017-09-18 11:46 ` Henrik Austad
2017-09-18 23:06 ` Vinicius Costa Gomes
2017-09-19 5:22 ` Richard Cochran
2017-09-19 13:14 ` Henrik Austad
2017-09-20 0:19 ` Vinicius Costa Gomes
2017-09-20 5:25 ` Richard Cochran
2017-10-18 22:37 ` Jesus Sanchez-Palencia
2017-10-19 20:39 ` Richard Cochran
2017-10-23 17:18 ` Jesus Sanchez-Palencia
2017-09-20 5:58 ` Richard Cochran
2017-09-18 8:12 ` Richard Cochran
2017-09-20 5:17 ` [Intel-wired-lan] TSN Scorecard, was " levipearson
2017-09-20 5:49 ` Richard Cochran
2017-09-20 21:29 ` Jesus Sanchez-Palencia
2017-09-20 1:59 ` [Intel-wired-lan] " levipearson
2017-09-20 5:56 ` Richard Cochran [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170920055616.snd6tndvbdnesnck@localhost \
--to=richardcochran@gmail.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox