From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S32 v3 05/15] ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx
Date: Wed, 6 Nov 2019 02:05:31 -0800 [thread overview]
Message-ID: <20191106100541.48639-5-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20191106100541.48639-1-anthony.l.nguyen@intel.com>
From: Usha Ketineni <usha.k.ketineni@intel.com>
This patch fixes the call trace caused by the kernel when the Rx/Tx
descriptor size change request is initiated via ethtool when DCB is
configured. ice_set_ringparam() should use vsi->num_txq instead of
vsi->alloc_txq as it represents the queues that are enabled in the
driver when DCB is enabled/disabled. Otherwise, queue index being
used can go out of range.
For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled
via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102
queues will be enabled.
Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 67d884e27ea4..3b9d33ad23d8 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2743,14 +2743,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
netdev_info(netdev, "Changing Tx descriptor count from %d to %d\n",
vsi->tx_rings[0]->count, new_tx_cnt);
- tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_txq,
+ tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_txq,
sizeof(*tx_rings), GFP_KERNEL);
if (!tx_rings) {
err = -ENOMEM;
goto done;
}
- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
/* clone ring and setup updated count */
tx_rings[i] = *vsi->tx_rings[i];
tx_rings[i].count = new_tx_cnt;
@@ -2803,14 +2803,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
netdev_info(netdev, "Changing Rx descriptor count from %d to %d\n",
vsi->rx_rings[0]->count, new_rx_cnt);
- rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_rxq,
+ rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_rxq,
sizeof(*rx_rings), GFP_KERNEL);
if (!rx_rings) {
err = -ENOMEM;
goto done;
}
- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
/* clone ring and setup updated count */
rx_rings[i] = *vsi->rx_rings[i];
rx_rings[i].count = new_rx_cnt;
@@ -2848,7 +2848,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
ice_down(vsi);
if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
ice_free_tx_ring(vsi->tx_rings[i]);
*vsi->tx_rings[i] = tx_rings[i];
}
@@ -2856,7 +2856,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
}
if (rx_rings) {
- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
ice_free_rx_ring(vsi->rx_rings[i]);
/* copy the real tail offset */
rx_rings[i].tail = vsi->rx_rings[i]->tail;
@@ -2890,7 +2890,7 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
free_tx:
/* error cleanup if the Rx allocations failed after getting Tx */
if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++)
+ ice_for_each_txq(vsi, i)
ice_free_tx_ring(&tx_rings[i]);
devm_kfree(&pf->pdev->dev, tx_rings);
}
--
2.20.1
next prev parent reply other threads:[~2019-11-06 10:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 10:05 [Intel-wired-lan] [PATCH S32 v3 01/15] ice: Use ice_ena_vsi and ice_dis_vsi in DCB configuration flow Tony Nguyen
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 02/15] ice: Add NDO callback to set the maximum per-queue bitrate Tony Nguyen
2019-11-07 18:34 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 03/15] ice: Implement DCBNL support Tony Nguyen
2019-11-07 18:35 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 04/15] ice: avoid setting features during reset Tony Nguyen
2019-11-07 18:35 ` Bowers, AndrewX
2019-11-06 10:05 ` Tony Nguyen [this message]
2019-11-07 18:36 ` [Intel-wired-lan] [PATCH S32 v3 05/15] ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 06/15] ice: configure software LLDP in ice_init_pf_dcb Tony Nguyen
2019-11-07 18:37 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 07/15] ice: Check if VF is disabled for Opcode and other operations Tony Nguyen
2019-11-07 18:37 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 08/15] ice: Change max MSI-x vector_id check in cfg_irq_map Tony Nguyen
2019-11-07 18:38 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 09/15] ice: use pkg_dwnld_status instead of sq_last_status Tony Nguyen
2019-11-07 18:38 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 10/15] ice: delay less Tony Nguyen
2019-11-07 18:39 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 11/15] ice: Update enum ice_flg64_bits to current specification Tony Nguyen
2019-11-07 18:39 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 12/15] ice: remove unnecessary conditional check Tony Nguyen
2019-11-07 18:40 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 13/15] ice: Introduce and use ice_vsi_type_str Tony Nguyen
2019-11-07 18:40 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 14/15] ice: use more accurate ICE_DBG mask types Tony Nguyen
2019-11-07 18:41 ` Bowers, AndrewX
2019-11-06 10:05 ` [Intel-wired-lan] [PATCH S32 v3 15/15] ice: print opcode when printing controlq errors Tony Nguyen
2019-11-07 18:41 ` Bowers, AndrewX
2019-11-07 18:34 ` [Intel-wired-lan] [PATCH S32 v3 01/15] ice: Use ice_ena_vsi and ice_dis_vsi in DCB configuration flow Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106100541.48639-5-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox